What is Metal: Definition and 999 Discussions

A metal (from Greek μέταλλον métallon, "mine, quarry, metal") is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically malleable (they can be hammered into thin sheets) or ductile (can be drawn into wires). A metal may be a chemical element such as iron; an alloy such as stainless steel; or a molecular compound such as polymeric sulfur nitride.
In physics, a metal is generally regarded as any substance capable of conducting electricity at a temperature of absolute zero. Many elements and compounds that are not normally classified as metals become metallic under high pressures. For example, the nonmetal iodine gradually becomes a metal at a pressure of between 40 and 170 thousand times atmospheric pressure. Equally, some materials regarded as metals can become nonmetals. Sodium, for example, becomes a nonmetal at pressure of just under two million times atmospheric pressure.
In chemistry, two elements that would otherwise qualify (in physics) as brittle metals—arsenic and antimony—are commonly instead recognised as metalloids due to their chemistry (predominantly non-metallic for arsenic, and balanced between metallicity and nonmetallicity for antimony). Around 95 of the 118 elements in the periodic table are metals (or are likely to be such). The number is inexact as the boundaries between metals, nonmetals, and metalloids fluctuate slightly due to a lack of universally accepted definitions of the categories involved.
In astrophysics the term "metal" is cast more widely to refer to all chemical elements in a star that are heavier than helium, and not just traditional metals. In this sense the first four "metals" collecting in stellar cores through nucleosynthesis are carbon, nitrogen, oxygen, and neon, all of which are strictly non-metals in chemistry. A star fuses lighter atoms, mostly hydrogen and helium, into heavier atoms over its lifetime. Used in that sense, the metallicity of an astronomical object is the proportion of its matter made up of the heavier chemical elements.Metals, as chemical elements, comprise 25% of the Earth's crust and are present in many aspects of modern life. The strength and resilience of some metals has led to their frequent use in, for example, high-rise building and bridge construction, as well as most vehicles, many home appliances, tools, pipes, and railroad tracks. Precious metals were historically used as coinage, but in the modern era, coinage metals have extended to at least 23 of the chemical elements.The history of refined metals is thought to begin with the use of copper about 11,000 years ago. Gold, silver, iron (as meteoric iron), lead, and brass were likewise in use before the first known appearance of bronze in the 5th millennium BCE. Subsequent developments include the production of early forms of steel; the discovery of sodium—the first light metal—in 1809; the rise of modern alloy steels; and, since the end of World War II, the development of more sophisticated alloys.

View More On Wikipedia.org
  1. C

    Plastic vs metal gears / parts

    Hello, I wonder whether I can replace the Metal gears and other parts with Plastic material? If so, what kind of plastic material should I use? There is no heat and the force is also not that great but the speed is. This is not for toy but industrial machinery, with gear diameter of about 10...
  2. T

    Create Rotatable Metal Reptile Scales with 3D Printer

    Hey guys. I am currently building a plan for a new metal sculpture of an alien reptile thing. The twist for me is that I want it's scales to be rotatable from being flat up to a 45 degree angle. The pivot needed would have to be fairly small ( scales are nearly inch wide) . I could not find...
  3. J

    Metal Superconductors and Negative Temperature

    What would happen to a metal superconductors taken below zero to a negative temperature? Would it loose its superconductivity?Regards, JDM
  4. J

    Metal insulator transition and percolation

    Hello, For the past 2 days I've been looking for a resource discussing the metal insulator transition using percolation theory. (The next part treats the Anderson and Mott models) I'm studying for a course of solid state physics where this is mentioned/summarized. The problem is that the...
  5. T

    Tensile Strength & Bending Stress of Metal Sheet

    Dear Friends, Merry Christmas to All. I am pleased to join this forum of Physics Experts. Please advise what is difference between tensile Strength and Bending Stress of Metal Sheets (Generally below 3.00mm and lighter). I very often encounter with cracking of steel sheets while bending in...
  6. kini.Amith

    How to tell if its a metal or a semiconductor

    Given a material sample, what are the different experiments that one can perform on it to check if it's a conductor or a semiconductor. For eg, we can measure R at different temperatures. Anything else we can do?
  7. C

    How TO make a variable 3D metal box

    Hi i want to know how to make a 3D metal box whose length, width, and height i can change. For example, i have a box of 3 m x 3 m x 3 m. i should be able to extend any dimension by a maximum of 1 meter i.e 4 meter (say). I want to use this to store items whose size is unknown, but the limits of...
  8. A

    Conductivity from Boltzmznn Equation for a metal

    I'm trying to show that conductivity of a metal in uniform Electric field is: $$ \sigma=\int \frac{d\textbf{k}}{4\pi^3}\left (- \frac{\partial f}{\partial \epsilon} \right )\textbf{v(k)u(k)} $$ where u(k) is a solution to the integral equation $$ \textbf{v(k)}=\int...
  9. T

    Heating and cooling a metal at the same time

    What happens if a metal is heated and cooled at the same point at the same time?? will it expand or contract??
  10. Q

    How to measure the length of metal sheet coil?

    Hi everyone, I have been trying to find an equation to measure the length of a coil. The coil is a metal sheet that wraps around the loops as it creates. It looks like a roll of tape. I have been using two different formula, but it is not giving me the right results. 1. L = 0.065449 (OD^2 -...
  11. K

    Final Temperature of Hot Metal in a Calorimeter

    Homework Statement A copper vessel of 100 gr contains water, 150 gr, and 8 gr of ice. a 100 gr piece of lead at 2000C is thrown in. what's the final temp' Homework Equations Specific heat copper: 0.093 Specific heat lead: 0.031 Melting heat water: 79.7[cal/gr] The Attempt at a Solution On the...
  12. Shindo

    Boy Holds 100N Sign Against Wall: How Much Push Force?

    Homework Statement If the coefficient of static friction between the sighn and his hands is 0.6, and the coefficient of static friction between the sign and the wall is also 0.6, with what force must the boy push to keep the sign in place? Homework Equations 0.6(Fn)=100 N Fn=166.7 N The...
  13. E

    Accident at steel plant spills molten metal onto plant floor

    Here is a video of a funny accident that happened at a steel mill in Russia. Thousands of pounds of molten metal come pouring out of it's ladle onto the floor due to equipment failure. Fortunately no one was hurt in this incident, but the whole plant could have gone up in flames if the outcome...
  14. D

    Why Does Metal Require More Energy for Electron Emission?

    Homework Statement in my book , i was told that for the emission of electron from a metal surface to occur , the photon which incident on the metal must have at least the energy more than the work function of metal , whereas for the emission of electron from H atom, the photon must have exactly...
  15. D

    Effect of changing target metal to heavier metal in X-ray tube

    Homework Statement when target metal is changed to heavier metal in X-ray tube, the min wavelength will not change. but the wavelength of the characteristics line will become smaller. my textbook gives me the above statement explaining much. can someone please explain it? thanks ! Homework...
  16. J

    Trying to cut a parabolic shape in sheet metal

    Hi, I am trying to cut a parabolic curve in a piece of sheet metal using a numerically-controlled cutting machine (basically a very hard rotating router blade). The router blade is 10mm diameter. I want to achieve a parabolic cut in the sheet metal that adheres to the formula y=x^2 The...
  17. J

    PMF of X for Airport Metal Detector Activations

    Homework Statement Of the people passing through an airport metal detector, 0.5% activate it; Let X denote the number among a randomly selected group of 500 who activate it. 1) What is the PMF of X i) Using th CLT (approximate PMF) ii) Using the exact distribution of X 2) P(X = 5)...
  18. R

    Finding thermal conductivity of an insulated metal bar

    Homework Statement One end of an insulated metal rod is maintained at 100∘C and the other end is maintained at 0.00 ∘C by an ice–water mixture. The rod has a length of 60.0cm and a cross-sectional area of 1.40cm2 . The heat conducted by the rod melts a mass of 7.15g of ice in a time of 15.0min...
  19. E

    Breakdown of metal passivation layers

    Hi All I hope that someone where can help me out. Let's assume that we take a piece of Al foil and a Pt wire and put them into an ionic solution. We then apply a voltage difference of 2 V between the two. Al(+) and Pt(-). After a few seconds the Al electrode starts to corrode. Nothing new...
  20. ELB27

    Force of repulsion between two hemispheres of a metal conductor

    Homework Statement A metal sphere of radius ##R## carries a total charge ##Q##. What is the force of repulsion between the "northern" hemisphere and the "southern" hemisphere?Homework Equations The force per unit area on the surface of a conductor: \vec{f} = \frac{1}{2\epsilon_0}\sigma^2\hat{n}...
  21. A

    Liquid Metal Under Applied Voltage

    Hi guys! I have a question regarding liquid metals. Suppose you had a droplet of liquid metal in empty space. Take the droplet and connect it to a DC source. What happens if the voltage of the DC source exceeds the surface tension of the liquid metal droplet? Would the droplet split in two...
  22. Medicol

    Electrolysis and reduced mass of a metal bar

    1. Insert a bar of copper of m(gram) into (HCl + H2O). After a while, its weight become m_1 (gram) which is smaller than m. Explain why and give a general formula to find m_1 2. None 3. I keep thinking how that becomes possible, because I learn that Cu can't react with HCl+H2O
  23. T

    Induced current and torque in a rectangular metal loop

    Homework Statement (a) The metallic rectangular loop of length b and width a (ABCD) is mounted in an assembly, which allows it to be rotated about an axis bisecting AD and BC. The plane of the loop makes an angle θ to the horizontal and a uniform magnetic field B is applied vertically...
  24. G

    Standard enthelpy of formation needed for EDTA metal complexes

    Hi, I am trying to solve the chemical equilibria in a kraft mill bleach plant to predict mineral scale deposits. I am using the van't Hoff equation to account for temperature dependence of the formation constants, but I need the enthalpy of reaction for all equilibria and I am missing some...
  25. K

    Formula for pull force of a ring magnet on a metal rod

    Hi, Can somebody give me the formula for pull force of ring magnet(permanent. not solenoid or electric) on a metal rod. Also is the formula for pull force by a solenoid given below correct. If not let me know the correct one for the below. Force = ((N x I)^2 x μ x A) / (2 x g^2) N =...
  26. A

    Time to Rotate Metal Sphere 1 Time

    Homework Statement A girl pushes on a large stone sphere. The sphere has a mass of 8200 kg and a radius of 90 cm and floats with nearly zero friction on a thin layer of pressurized water. Suppose that she pushes on the sphere tangent to its surface with a steady force of F = 45N and that the...
  27. E

    How can I calculate the force between finite coil and metal plate?

    Hi, I would like to calculate the force between a finite coil and a nearby metal plate. A pulsed current is supposed to flow into the magnetic coil, which will generate a magnetic field near the coil. Due to this magnetic field, an Eddy current will be produced in a nearby metal plate and...
  28. A

    Electrostatic discharge and metal rods

    I uploaded a photo to help explain the question, basically the blue rod is a -ve charged rod ( high voltage) gray one is metal and the brown is also metal but it's grounded , if gap A and B are filled with air , the high voltage will break down the air in both gaps and make 2 sparks in both gaps...
  29. C

    Wood vs Metal (Interface Material)

    Hi all, I have an idea for a project whereby I there would be an electromagnet pulling on a metal weight through wood. So: Electromagnet -> Wood -> Metal The basic idea is to stick things to wood with electromagnets. Can anyone recommend a material that could be bonded to the Metal what...
  30. Teemo

    Precipitation of Metal Chlorides

    Homework Statement A colorless solution is known to contain one of these ions. Which ion is present if adding dilute HCl produces a white precipitate that dissolves when the solution is warmed? A) Ag+ B) Cu2+ C) Hg22+ D) Pb2+ Homework Equations N/A The Attempt at a Solution The...
  31. ranju

    Electrons in Metal: Explaining Free Electron Theory

    I just wanted to clear one thing... in metals what type of potential the electrons are subjected to..?? Is it constant , sinusoidal , square or non-periodic..?? pleasez explain a bit in accordance with free electron theory.>!
  32. S

    Does a flame-heated red-hot metal emit electrons?

    Hello this is my first post in this forum. I would like to ask something relatively simple and I need a simple answer please, since I am not a physics expert. Does a metal that has been red-hot heated using a flame, emit electrons? (like the electrically heated cathode of a vacuum tube does)
  33. C

    Two metal rods, one silver and the other copper, are both immersed at

    Homework Statement Two metal rods, one silver and the other copper, are both immersed at one end in a steam chamber at a temperature of 100°C. The other end of each one is in an ice water bath at 0°C. The rods are 5.0 cm long and have a square cross-section that is 2.0 cm on a side. No heat is...
  34. Conservation

    Oxidation of Metal Using a Generator

    Hi all, this question may sound incredibly obvious to a degree of trolling, but I was having difficulty finding an online source that dealt with this subject. When one connects a metallic plate to, say, a positive end of a voltage source, is the metal actually oxidizing and changing to +1...
  35. V

    Electric Field of metal

    Homework Statement A sealed metal can is placed in a uniform external electric field of 10 N/C . The field points along the +x direction. The can is 20cm in length and 10cm in diameter. What's the value of the electric field at the center of the can? Homework Equations The Attempt at...
  36. N

    Two isolated metal cubes: Negative ΔS? Thermodynamics

    Hi. So let's say you have two identical cubes with expansion coefficients of approx. zero. These cubes are thermally in contact with each other, and otherwise isolated from the surroundings. One cube has a higher temperature than the other, so heat will flow from the hotter cube and to the...
  37. B

    Exploring the Movement of a Metal Bar in a Magnetic Field

    Homework Statement Can't seem to upload the figure in my workbook so I'll describe it. A metal bar is placed on 2 rails that slope up with a gradually increasing tangent. The bar has a higher conductivity than the rest of the apparatus. The 2 ends of the rails at the bottom are connected to a...
  38. N

    Need formula for particular metal alloy, requirements inside

    If you have a knife edge (dual sided at 45°, 1/8" thick, and you want as little deformation as possible under a 50 lb. load, what would be the ideal alloy? Harden steel? Tungsten? High carbon steel? Application: two point guitar tremolo, total tension being around 100 lbs. Looking...
  39. heycoa

    Questions regarding the Fermi level of a metal

    Hello, Are the electrons at the fermi level regarded as the "free electrons" of the metal? Also, how does one go about calculating the Fermi level? Is there an equation or is it experimentally determined? *Bonus question* Electrons that undergo phonon exchange and pair up are called...
  40. B

    Why does a chemical compound precipitate metals differently than metal

    In a solution of aqua regia (or other acids), if there is a precious metal dissolved, along with other metal ( such as other precious metals or base metals), and you add a powdered metal, you precipitate all the metals lower than it on the reactivity list. If however, you use a chemical...
  41. Y

    Materials - Modulus of polymer and metal

    Homework Statement Why is there such a large difference between the elastic moduli of metals and polymers? Homework Equations The Attempt at a Solution I am thinking because of the different bonding between metals and polymers. Since metals have metallic bonding and polymers...
  42. B

    What is the electric potential of a metal cylinder?

    As the title says, what is the electric potential of a metal cylinder? If I am missing any variables, which variables do I need? My little brother asked me this but I don't want to turn up short-handed. I'm not really a physics guy
  43. R

    Magnetic field at a point above a metal strip.

    Homework Statement An infinitely long thin metal strip of width w=12cm carries a current of I=10A that is uniformly distributed across its cross section. What is the magnetic field at point P a distance a=3cm above the center of the strip? Homework Equations dB = (μ0*dI)/(2*∏*r) The...
  44. B

    Can Charge and EM Energy Change Metal Structure

    Hello Everyone, This is my first post. Background: I am an audio guy and seek to understand how cables contribute to the sound of my stereo. Issue: Do audio cables such as power cords, interconnects, and speaker cables "break in" as they are used? Typically, with high-end cables, users...
  45. N

    Induced EMF in metal loop near RC circuit

    Homework Statement (Challenge Problem 80, Ch33) A rectangular metal loop with 0.050 ohms resistance is placed next to one wire of the RC circuit shown in the below figure. The capacitor is charged to 20 V with the polarity shown, then the switch is closed at t = 0s...
  46. R

    Why does shiny metal get so hot in the sun

    I have tools that are made of metal and very reflective and shiny. If shiny objects reflect light waves, how is it that my tools get too hot to touch if I leave them in the sun (in the summer months)? Are the tools absorbing other forms of EM radiation?
  47. craigi

    Metal packing structure and curved space

    In flat space the atoms in a metal have regular packing structures. A slight curvature of space would mean this wasn't geometrically possible. As a consequence do we expect metals to have a significantly lower density with a slight curvature of space? Obviously, this doesn't just apply to...
  48. S

    Metal bar on rails, induced emf

    A metal bar with length L, mass m, and resistance R is placed on frictionless metal rails that are inclined at an angle α above the horizontal. The top end of the rails are connected with a conducting wire. The resistance of the rails and wire are negligible. The rails are embedded in a uniform...
Back
Top