What is Metal: Definition and 999 Discussions

A metal (from Greek μέταλλον métallon, "mine, quarry, metal") is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically malleable (they can be hammered into thin sheets) or ductile (can be drawn into wires). A metal may be a chemical element such as iron; an alloy such as stainless steel; or a molecular compound such as polymeric sulfur nitride.
In physics, a metal is generally regarded as any substance capable of conducting electricity at a temperature of absolute zero. Many elements and compounds that are not normally classified as metals become metallic under high pressures. For example, the nonmetal iodine gradually becomes a metal at a pressure of between 40 and 170 thousand times atmospheric pressure. Equally, some materials regarded as metals can become nonmetals. Sodium, for example, becomes a nonmetal at pressure of just under two million times atmospheric pressure.
In chemistry, two elements that would otherwise qualify (in physics) as brittle metals—arsenic and antimony—are commonly instead recognised as metalloids due to their chemistry (predominantly non-metallic for arsenic, and balanced between metallicity and nonmetallicity for antimony). Around 95 of the 118 elements in the periodic table are metals (or are likely to be such). The number is inexact as the boundaries between metals, nonmetals, and metalloids fluctuate slightly due to a lack of universally accepted definitions of the categories involved.
In astrophysics the term "metal" is cast more widely to refer to all chemical elements in a star that are heavier than helium, and not just traditional metals. In this sense the first four "metals" collecting in stellar cores through nucleosynthesis are carbon, nitrogen, oxygen, and neon, all of which are strictly non-metals in chemistry. A star fuses lighter atoms, mostly hydrogen and helium, into heavier atoms over its lifetime. Used in that sense, the metallicity of an astronomical object is the proportion of its matter made up of the heavier chemical elements.Metals, as chemical elements, comprise 25% of the Earth's crust and are present in many aspects of modern life. The strength and resilience of some metals has led to their frequent use in, for example, high-rise building and bridge construction, as well as most vehicles, many home appliances, tools, pipes, and railroad tracks. Precious metals were historically used as coinage, but in the modern era, coinage metals have extended to at least 23 of the chemical elements.The history of refined metals is thought to begin with the use of copper about 11,000 years ago. Gold, silver, iron (as meteoric iron), lead, and brass were likewise in use before the first known appearance of bronze in the 5th millennium BCE. Subsequent developments include the production of early forms of steel; the discovery of sodium—the first light metal—in 1809; the rise of modern alloy steels; and, since the end of World War II, the development of more sophisticated alloys.

View More On Wikipedia.org
  1. V

    Induction cooking: barefoot, with a metal spoon

    Anyone know anything about induction cookers? Induction cooking? What if the lady sticks a metal spoon to stir the pan and is bare-foot? What prevents the eddy current from breaking out of the loop given the new path your body provides?
  2. E

    Calcuate Elastic Modulus of metal cable

    Homework Statement A mass of 225 kg is hung from a metal cable of length 1.60m and diameter 8.20mm. This causes the cable to stretch by an amount 0.668mm. Calculate the Elastic Modulus of the metal. Homework Equations E=(F/A)/(change L / orig L) The Attempt at a Solution F =...
  3. L

    What happens when an acid or base reacts with a metal, for example, Mg.

    The acid: Hydrochloric What happens step by step? I am unfamiliar with acids and bases, so I just want to know what's happening to help figure out. Thanks.
  4. E

    How do I calculate the ratio of charges for metal sphere?

    Homework Statement here's how the question goes: the magnitudes of the charges on two identical small metal spheres are in the ratio 5:1. the coulomb interaction force between them is F1. if they are brought into contact and then separated to their respective original positions, the coulomb...
  5. F

    How does a metal detector work ?

    Hey there, I have problems trying to understand how a metal detector works. I don't understand why the inductance of a coil changes when a metal is approaching. Can someone explain that to me ? :redface: Thanks a lot for your help
  6. C

    How do you calculate heat flux through a piece of metal?

    How do you calculate heat flux through a piece of metal?? Hello, I need to calculate heat flux in W/m2 through a small cylindrical steel bar measuring 12mm length x 2mm diameter. At one end of the bar the temperature is 31C (the heated side) and at the other end it's 28C. How do I calculate...
  7. P

    Ion Distribution in Grounded Metal Bowl: NaCl in Water

    Homework Statement Imagine water in a metal bowl that is open to air. This metal bowl is grounded. You add some NaCl to the water. What would the distributions of the ions look like in the water. Homework Equations I think this doesn't need equations, but just general understanding...
  8. Z

    Heat Flow in Three Identical Rods of Metal

    Homework Statement Three rods of identical cross-sectional area are made from the same metal, form the sides of an isosceles triangle ABC right angled at B. The points A and B are maintained at temperature T and √2 T respectively in steady state. Assume that only heat conduction takes place...
  9. M

    Thermodynamics Cubes of Metal Problem

    Homework Statement Three cubes of equal lengths, lead, iron, and copper are arranged between heat boxes at 100C and 0C. The heat current between boxes is 155W. 1) What is the side length of the cube? 2) What is the temperature between the lead and iron cubes? Some k values are also...
  10. S

    Strong magnet and was standing in metal shoes

    If I had a strong magnet and was standing in metal shoes that were welded to a metal trashcan lid, could I levitate myself with said magnet?
  11. L

    Norganic cofactors such as metal ions permanently bound

    Homework Statement I have a small question, are inorganic cofactors such as metal ions permanently bound or temporarily bound to enzymes...? i can't find any info concerning this..and if anyone could tell me if i understand this concept properly: Cofactors are separated into either organic...
  12. W

    Why pesistent current in a normal metal ring is a surprise?

    i cannot understand why persistent current in a normal metal ring threaded by a magnetic field is a surprise. the hamiltonian is H=\frac{1}{2I}\left(-i \frac{\partial}{\partial \theta}-A\right)^2 and the eigenstates are \phi_m(\theta)=\frac{1}{\sqrt{2\pi}} e^{i m \theta} with...
  13. J

    ANSYS Workbench contact metal stamping problem

    I have a problem that requires me to do a simple simulation of a sheet metal stamping. I have access to Ansys Workbench v12 Academic version, and have familiarized myself with the program and tried to read up on its features and limitations. The simulation is selected as a static structural...
  14. L

    Back Titration Of Metal Carbonate

    I'm having an issue solving a back titration problem. We need to identify the metal in a metal carbonate. It can either be a group 1A or 2A 1.8500 grams of the carbonate are diluted to .2500L and then 0.02000L is taken and mixed with 0.01500L of 0.1789M HCl in a flask. After shaking the...
  15. AlexChandler

    Electric Field between two large oppositely charged metal plates

    Homework Statement I am trying to calculate the electric field between these two plates... and I am using two different methods to do so. One gives me the correct solution, and the other does not. I am curious as to why the second method is wrong. Homework Equations Gauss's Law Phi =...
  16. U

    Newtonian mechanics of a metal slab

    Homework Statement A 90 kg metal slab is pulled across the ground by a tractor. The coefficient of friction between the slab and the ground is µ = 0.65. If the force of the tractor on the slab is 600 N and is directed at 35° from the horizontal, what is the acceleration of the slab...
  17. I

    Grounding location of a metal object

    if I have 2 spheres A and B initially neutral, isolated from ground and in contact with each other, when I bring a negatively charged rod near to sphere A, I understand that positive charges will be induced on A and negative charges on B. Suppose I were to ground the sphere (a wire either...
  18. T

    Thermal expansion of a metal round disk with hole in the middle

    This is my first post on this forum because I have a question that I cannot seem to answer myself. At my working place we have a machine where a metal conveyor belt is running through a section of the machine where the temperature is constant at 320 degrees Celcius. On this conveyor belt are...
  19. G

    Potential Energy of two small metal speheres

    Homework Statement Two small metal spheres, A and B, of mass mA = 6.5 g and mB = 12.7 g have equal positive charges of 8 μC. The spheres are connected by a non-conducting string of negligible mass and with length d = 1.4 m, which is much greater than the radii of the spheres. a) What is...
  20. P

    Calculating Heat Capacity, deltaU and deltaH of Cu Metal

    Homework Statement At 25C Cu metal (at. wt. 63.54 g/mol) has a molar heat capacity of 24.4 J/molK. The density of Cu is 8.949g/cm^3 at 0C and 8.904 g/cm^3 at 100C. Assuming that Cp is temperature independent, calculate Q, W, deltaU and deltaH when 100grams of Cu metal are heated from 0C to...
  21. J

    Finding the new diameter of a metal rod after tensile loading

    Homework Statement A metal rod with a 0.5 inch diameter is subjected to a 2000 lb tensile load. Calculate the resulting diameter of the rod after loading. Assume that the modulus of elasticity is 10,000,000 psi, Poisson's ratio is 0.33, and the yield strength is 21,000 psi. Homework...
  22. S

    Understanding charge transfer on metal spheres. Help please

    Homework Statement I would really appreciate help understanding how the answer is reached in this question: Setting the scene: three metal sphere's are in fixed positions R (+Q), S (+2Q) and T (+3Q): +Q +2Q +3Q...
  23. H_man

    So confused about reflection from metal surfaces

    :bugeye:Hi All... I am really confused about the mechanism of loss of energy when an EM wave hits a metal surface. I always thought the reflection was due to the motion of the electrons in the metal (due to the electric field of the wave). Which suggests that resistive losses would come...
  24. W

    Atoms tunnelling through a metal surface

    Hey guys.i have heard it has been experimentally proved that even atoms can tunnel through a metal surface.I tried searching all over the web but just could not get any references on that.So,is that true?if somebody know where i can read more about that experimental proof,please point it out...
  25. B

    Charge Distribution from Known Potential - Induced on Surface of Metal Sphere

    Homework Statement Using the method of images: discuss the problem of a point-charge “q” inside a hollow, grounded, conducting-sphere-shell of inner radius “a”. That charge "q" is located at {\left| {{{{\bf{\vec r}}}_0}} \right|}. We don't care about its angular position. Oh yes: the problem...
  26. D

    Light Illumination effect on metal conductivity

    How does shining light on a metal affect it's conductivity? Specifically, I'm wondering about IR light (1.5um) shining on either Aluminum or Gold. My intuition would say that if the metal isn't a perfect reflector and has some absorption, it would increase the number of carriers, thus...
  27. P

    Building a Simple metal detector circuit

    Hi guys, I am new at this so sorry if i get the format wrong. Im trying to build a basic metal detector that will respond when a steel pendulum passes nearby. A simple response is all that is needed right now. I thought of this: Building a RL circuit with a copper coil air core. placing a...
  28. Topher925

    Is nano metal plating commercially available yet?

    Not to long ago there was a lot of hubbub about nano plating and the low costs that comes with it. I was curious if anyone knows whether or not nano plating is commercially available yet or if its still in the research phase? I've got a lot of applications for gold and silver plating and would...
  29. S

    Blended metal bullets; much heat after impact? Can anyone tell me?

    "Blended metal" bullets; much heat after impact? Can anyone tell me? These bullets supposedly will penetrate body armor, but not drywall, and are alleged to pretty well explode when going through flesh. I've read a report by a contractor who used one in Iraq and said the soft tissue damage...
  30. E

    Calculating the capacitance of a metal strip?

    Does anyone know how to calculate the capacitance of a metal strip of width 2a and infinitesimal thickness? The length of the metal strip is much larger than its width. Thanks a lot!
  31. C

    If you scratch a piece of metal, does it weigh more?

    Say you have a 1kg piece of metal (1kg EXACTLY) at an arbitrary, constant temperature. You make a scratch in it with a needle, and you do it carefully enough that you don't rub off any atoms off the metal onto the needle, that way you still have 1.00000000000000000000000000... kg of metal in...
  32. J

    Are blocks (billets) of metal crystals?

    I work as a machinest and Mill mostly aluminum. I was wondering if the billets are Aluminum its crystalline form? Or just lots of Aluminum atoms held together by Metallic bond? thank you. Attached is a photo of Aluminum Block.
  33. Y

    What are the different methods for coloring metal?

    How do you colour metal? What are some advantages of corrosion? What are the methods one can use to stain mental or change the colour of metal as the Apple company does to create the wide range of different beautiful colours that their iPod's come in?
  34. S

    Magnets sliding down metal sheets (slower then non metals)

    hey guys, I've been given an assignment on the topic of eddy currents and magnetic induction. We have been given info that when a magnet slides down an incline over a magnetic sheet, the eddy currents in the metal acts as a braking mechanism (lenz's law). I've done some research and what i...
  35. M

    Transition metal oxidation states

    Hi Why does Ni only form NiO with oxidation state of +2 whereas the other transition metals form a wide range of oxides with variable oxidation states Thanks
  36. D

    Exploring the Chemistry of Liquid Metal Batteries on MSNBC.com

    http://www.msnbc.msn.com/id/29900981/ "One of the first compilations used molten antimony and magnesium as the charge holders with a layer of sodium sulfide between the two."How does this work? What chemical reaction is taking place between the metals and the salt?
  37. M

    Energy and Capacitors of metal spheres

    Homework Statement Two uncharged metal spheres, spaced 15.0 cm apart , have a capacitance of 24.0 pF. How much work would it take to move 12.0 nC of charge from one sphere to the other? Homework Equations V = Q/[4(pi)eor] (delta)K + (delta)U = 0 *I think The Attempt at a Solution...
  38. A

    ? (How to vibrate a metal object with certain frequency)

    ? (How to vibrate a metal object with certain frequency) Hi there I was conducting an experiment and I have to vibrate a metal object with certain frequency. I had to ask can we vibrate a metal object with certain frequency , if yes please suggest me the ways. Thank you
  39. N

    Can Rubbing a Metal with a Cloth Charge It by Friction?

    Imagine you have a rod half of which is made of copper and the other half is made of polythene (insulator). If the rod is held from the insulating part (and so it's not earthed) and the copper part is rubbed vigorously with a very dry cloth, will it be charged or not? In short I want to know...
  40. S

    Metal Detector Probe: Find Iron Rod in Concrete Walls

    Hi guys, I am working on a Automation project and I am wondering whether there is any probe that can emit signal to a standard PLC when iron rod is found inside a concrete wall. Personally, I hope it can be avaliable from RS. Thanks for your kind help in advence.
  41. M

    Electrodynamic Question about Metal.

    I am sort of having a brain fart about this, when sending electricity threw a metal it becomes negatively charged correct? |-------------------------------------------------< |-->(Positive)Power(Negative)-------->Metal-------^ The electrons leave the negative terminal, pass threw the...
  42. D

    How Does Changing the Length of a Metal Strip Affect Its Resonance Frequency?

    Hey , I am not really the most brightest student when it comes to physics and i really don't understand it at all . but we are doing a prac in class and here it is Theory: A Clamped metal strip has a natural frequency of vibration which is related to its length. The shorter the leng, L the...
  43. P

    What's the best way to make a warm metal plate?

    As the title says (and yes, I know it sounds a bit weird), what's the best way to make a warmable metal plate (70*45 cm big), using electrical warming? I've been thinking about using induction heating to make the plate warm, but I don't know the best way to do it. It should be battery driven and...
  44. R

    Solving Conduction Heat Wave in Metal Bar

    Homework Statement A conduction heat wave is caused to pass through a metal bar of average temperature Tmean = 35.0 °C, altering its temperature sinusoidally with an amplitude of Ti = 2.0 °C. The equation which gives the temperature, T(x,t), of the metal bar at any place x (in meters) inside...
  45. D

    Metal plate leaning against a wall

    Homework Statement A metal plate (with mass = 7kg and Length = 1.6m) is leaning against a frictionless wall and made an angle (Phi). The foot of the plate is made of circular edge that is situated at a V-grooved gap with angle (Theta). There are three normal force: F(wall) for the normal force...
  46. B

    How Wide Should Steel Be Pre-Bending for a 21 Finish with a 1 Lip?

    I need a piece of .125" steel sheet metal to be 21" wide after a 1" lip is bent to 90 degrees on one side. How wide does the initial piece of steel need to be before bending in order to achieve this? I know it will be more than 22", but how much more? If I recall its fairly simple to figure...
  47. E

    How Is Thermal Energy Absorbed in a Calorimeter Experiment with Tin?

    Homework Statement Find the quantity of thermal energy absorbed but the water in the calorimeter. Mass of metal sample:69.64g Water sample: Volume 190mL Temp: 24'C boiling water: 275mL temp of boiling water:90'C Sample in Calorimeter Initial Heat: 25'C 30 seconds: 26'C 60 seconds 26'C 90...
  48. D

    A neutral metal rod in a uniform magnetic field

    Homework Statement A neutral metal rod of length 0.35 m slides horizontally at a constant speed of 9 m/s on frictionless insulating rails through a region of uniform magnetic field of magnitude 0.6 tesla, directed into the page as shown in the diagram. Before answering the following...
  49. A

    Finding entropy involving metal in water

    Homework Statement A piece of metal at 80C is placed into 1.2L of water at 72C. This thermally isolated system reaches a final temperature of 76C. Estimate the overall change of entropy for this system. Homework Equations deltaS = Q/T Q=m*c*deltaT The Attempt at a Solution I...
  50. C

    Direction of induced current in metal loop

    Homework Statement A metal loop is attached to an axle with a handle as shown. The north pole of a magnet is placed below the loop and the handle turned so that the loop rotates counterclockwise at a constant angular speed. On the two diagrams below, indicate the direction of the induced...
Back
Top