What is Metal: Definition and 999 Discussions

A metal (from Greek μέταλλον métallon, "mine, quarry, metal") is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically malleable (they can be hammered into thin sheets) or ductile (can be drawn into wires). A metal may be a chemical element such as iron; an alloy such as stainless steel; or a molecular compound such as polymeric sulfur nitride.
In physics, a metal is generally regarded as any substance capable of conducting electricity at a temperature of absolute zero. Many elements and compounds that are not normally classified as metals become metallic under high pressures. For example, the nonmetal iodine gradually becomes a metal at a pressure of between 40 and 170 thousand times atmospheric pressure. Equally, some materials regarded as metals can become nonmetals. Sodium, for example, becomes a nonmetal at pressure of just under two million times atmospheric pressure.
In chemistry, two elements that would otherwise qualify (in physics) as brittle metals—arsenic and antimony—are commonly instead recognised as metalloids due to their chemistry (predominantly non-metallic for arsenic, and balanced between metallicity and nonmetallicity for antimony). Around 95 of the 118 elements in the periodic table are metals (or are likely to be such). The number is inexact as the boundaries between metals, nonmetals, and metalloids fluctuate slightly due to a lack of universally accepted definitions of the categories involved.
In astrophysics the term "metal" is cast more widely to refer to all chemical elements in a star that are heavier than helium, and not just traditional metals. In this sense the first four "metals" collecting in stellar cores through nucleosynthesis are carbon, nitrogen, oxygen, and neon, all of which are strictly non-metals in chemistry. A star fuses lighter atoms, mostly hydrogen and helium, into heavier atoms over its lifetime. Used in that sense, the metallicity of an astronomical object is the proportion of its matter made up of the heavier chemical elements.Metals, as chemical elements, comprise 25% of the Earth's crust and are present in many aspects of modern life. The strength and resilience of some metals has led to their frequent use in, for example, high-rise building and bridge construction, as well as most vehicles, many home appliances, tools, pipes, and railroad tracks. Precious metals were historically used as coinage, but in the modern era, coinage metals have extended to at least 23 of the chemical elements.The history of refined metals is thought to begin with the use of copper about 11,000 years ago. Gold, silver, iron (as meteoric iron), lead, and brass were likewise in use before the first known appearance of bronze in the 5th millennium BCE. Subsequent developments include the production of early forms of steel; the discovery of sodium—the first light metal—in 1809; the rise of modern alloy steels; and, since the end of World War II, the development of more sophisticated alloys.

View More On Wikipedia.org
  1. A

    Calculating charge transferred between metal spheres

    Suppose I have two metal spheres, radius 1 metre and 1 cm. I charge the small one to 100V. The self-capacitance of the sphere is 4µϵR, so the charge Q = CV = 4µϵ coulombs Then I touch the two spheres together. I assume charge flows between them so that the voltage equalizes. As charge builds on...
  2. A

    Metal Spheres; Interaction between conductors; induction

    Homework Statement Initially the three spheres are uncharged; then sphere A is dragged across a t.v. screen with an excess charge, giving (A) an excess negative charge. Then (A) is placed next to (B) and all three spheres lie on a line. There is a wire connecting (B) and (C). We want to...
  3. L

    Cutting metal pipe to make different pitches

    Hi, we are trying to make different pitches by cutting metal pipes at different frequincies to produce different pitches. We don't know how to determine the length at which we should cut the pipes. We want to play notes E, D, C, G to play mary had a little lamb. the outer diameter of the pipe is...
  4. T

    Metal Contact Effect on 1-D particle in a box quantum well

    Dear All, When an electrical contact is made onto the quantum well, how would the energy states be affected ?
  5. B

    Understanding Energy Differences in Free Electron Metals

    Homework Statement a) Explain why in a free electron metal it is not possible for all electrons to have the same energy. b) Why is the specific heat of simple metals at room temperature much lower than that calculated for a classical gas of electrons? The Attempt at a Solution a)...
  6. Z

    Degrees of freedom for a metal crystal

    Recently did an exercise calculating the theoretic heat capacity of a metal. In the solutions manual they put the degrees of freedom f=6. Why is that? I know that a rigid body has 6 degrees of freedom but does that apply to each atom in the crystal?
  7. J

    Aerodynamics: airsoft BB travel down a long metal barrel

    Hello PF, I come to you from the airsofting community with a question that has plagued much of the community for years. I hope to get some feedback from the physics community to help direct or debunk some of the "theories" floating around this issue. So, airsoft is a sport where...
  8. D

    Linear metal expansion - For an Old timer

    Hi all I am a newbie here, so please go gentle It is along time since I have had to use Thermal Co-efficients of expansion for various metals. However, I am trying to tie in some figures I have been given to what I know to be reality. i am sure that I am doing something basically wrong...
  9. A

    Seeking advice concerning metal thickness for a tree digging spade

    Hello to all, I have a question concerning what thickness of plate steel to use for a tree spade that I'm going to have made to help with transplanting some trees. The intent is to have a spade that cuts 1/4 of a cone that is 24" in diameter and 18" deep. After cutting the tree's root ball...
  10. D

    Question about conductivity and metal bonds

    Hello everybody. I would like to ask the following: Imagine a source of strong electric filed. For example a positively charged metal sphere. Then we put a small (relatively to the source of the electric field) metal object in the electric field. Electron inside the metal move in such way, that...
  11. Q

    How the ductility of metal change when grains is decreased ?

    How the ductility of metal change when grains is decreased ? Hello every body, I'm from Vietnam. I have a question that : if we decrease the size of the grain of metal by heat treatment, what happen to the ductility of that metal, increase or decrease, and why ? for example, the metal of plain...
  12. I

    Finding potential at the center of metal sphere

    Hi Here is a problem I am trying to do. A point charge q is located at a distance r from the center O of an uncharged conducting spherical layer whose inside and outside radii are equal to R_1 and R_2 respectively. Find the potential at the point O if R_1 < R_2. Now I was thinking of method of...
  13. I

    Graphing The ΔV between three charged metal electrodes

    Homework Statement Graphing The ΔV between three charged metal electrodes, in regards to x distance Here is the the picture I'm given with the problem. The hint tells me to assume that V=0 when x=0.Homework Equations C=Q/ΔVThe Attempt at a Solution I thought the electrodes looked kinda like a...
  14. S

    Quantum Theory of Metal- Mean Free Path

    Homework Statement I'm off by a factor of 106 and I have no idea why. "Silver has a density of 10.5*103 kg/m3 and a resistivity of 1.60*10-8 Ω*m at room temperature. Assume that each silver atom contributes one electron to the electron gas. Assume that EF = 5.48 eV" What's the mean free...
  15. T

    Electric Potential of grounded hollow metal sphere

    Homework Statement There is a solid metal ball of radius 'a' (with charge Q) that is placed inside a hollow metal sphere (inner radius = 'b', outer radius = 'c'). The metal sphere is grounded (so V = 0 at r = c). a) Find the electric potential V everywhere. b) Find the charge on the metal...
  16. S

    Anyone Into Symphonic Metal/Opera Metal?

    I've just really started getting into more symphonic/melodic metal and I stumbled across Therion. Their pretty awesome and I would love to hear some bands that are in the same style as them. Any suggestions would be greatly appreciated. Here's a great Therion song for anyone who hasn't...
  17. S

    Metal oxides displacement reaction

    When a more reactive metal displaces a solid metal oxide, a lot if heat is required for the reaction to occur. However, both metal and metal oxide can be solid for the reaction to take place right?
  18. A

    Give a symbolic expression for submerging a metal in water

    In the lab you place a beaker that is half full of water (density pw) on a scale. You now use a light string to suspend a piece of metal of volume V in the water. The metal is completely submerged, and none of the water spills out of the beaker. Give a symbolic expression for the change in...
  19. S

    Passing a current from a metal wire through an electrolyte solution

    I am having trouble understanding how current can move through an electrolyte solution that does not contain ions of the metal of which the electrode supplying the current is made. For instance, if a silver wire were submerged in a solution of potassium chloride and, how would current pass into...
  20. S

    Why Zinc is a Metal: Explaining Low Melting Point

    as zinc is having completely field orbital sp2 ...why it is metal ? why it is having low melting point?
  21. Dotini

    Metal Boxes Found on Oregon, Sri Lanka Beaches

    http://www.huliq.com/10282/ufo-sightings-reveal-more-strange-metal-boxes-along-coastal-beaches This is one of the strangest stories I've ever run across. It is very hard to believe. Respectfully submitted, Steve
  22. A

    Ionization of surrounding air due to metal sphere

    Homework Statement A metal sphere of radius 0.15m carries an initial charge Q1 = +6.4x10-6 Coulombs a) show that this amount of charge is insufficient to ionize the surrounding air. b) your body, initially neutral, and the soles of your shoes are made of insulating material. You move...
  23. B

    Guitar effect introduces noise if I'm not touching it's metal case. Why?

    As the title says, a guitar effect I built introduces a lot of white noise, which goes away when I touch it's case. I removed the circuit from the case and found the noise also goes away when I hold the input sockets. How do I fix this? Thanks for any help!
  24. O

    What happen to a metal bar near a Van de Graaff?

    When I place a metal bar near a Van de Graaff, which generate hugh amount of positive charges on its surface, if I hold it for a period of time, will it be possible to magnetize this metal bar? what happen to its internal molecula structure? Does anyone have any suggestions? Thanks in advance...
  25. C

    Electric Potential two metal balls find final velocities

    Homework Statement Two metal balls of mass m1 = 2 g (diameter = 2 mm) and m2 = 6 g (diameter = 6 mm) have positive charges of q1 = 2 nC and q2 = 7 nC, respectively. A force holds them in place so that their centers are separated by 8 mm. What will their velocities be after the force is...
  26. C

    Metal ball charged with electron orbiting

    Homework Statement An electron orbits a 3.0 cm diameter metal ball 5.0 mm above the surface. The orbital period of the electron is l2.0 micro seconds. What is the charge on the metal ball? r=1.5cm or .015m R=.02m (.015+.005) Orbit=12*10^-6s Homework Equations E=(kq/r)R which gives...
  27. M

    Material Science- x-ray diffraction and metal densities

    Homework Statement Consider a metal with an BCC crystal structure and atomic weight 92.91. When monochromatic x-radiation having a wavelength of 0.14 nm is used, the angle of diffraction (2*theta) for the (211) set of planes in this metal occurs at 41.148 ° (first-order reflection)...
  28. O

    Potential of a grounded spherical shell inside of a metal one

    Picture: http://img263.imageshack.us/img263/7361/ongelma.jpg Homework Statement Solve the potential energy of a charged sphere-shaped metal shell. What happens when you place a smaller, grounded sphere-shaped metal shell inside of that shell? What is the potential energy then? How about the...
  29. L

    Enabling Mechanization of a Metal Frisbee

    I have a question regarding the common ring frisbee or regular (nonring) frisbee. I have been thinking of possible ways to "mechanize" the frisbee. I spoke with an engineer and he told me that of all the various possibilities that "combustion" probably has the greatest effect on the...
  30. T

    Planewave scattering on metal wedge problem

    Hi, I need help with following problem: I need to solve scattering of the planewave incident on the metal wedge. Let's say that wave travels in $z$ direction. Angle of wedge is $\alpha$, it is formed in $x-z$ plane. Wedge is infinite in $y$ direction (metal corner, if $\alpha = \pi / 2$, it will...
  31. M

    Two identical small metal spheres 3 cm apart

    Homework Statement Two identical small metal spheres 3 cm apart attract each other with a force of 150N electrical module. They are temporarily connected by a conducting wire, which is then removed, making both charges equal. a) Determine the initial electrical charges if they now repel each...
  32. P

    Persistence Glowness of Platinum metal after heating

    What is the reason of Persistent Glowness of Platinum metal after removing it from the flame ?
  33. S

    A steel rod of 0.10kg rests on two metal rails inclined at an angle of

    A steel rod of 0.10kg rests on two metal rails inclined at an angle of 30 degrees. There is a magnetic field of 0.50T on the incline and a current of 70A flowing across the bar. Find the acceleration of the bar. The bar is 0.12m wide** The attempt at a solution What I have so far is a diagram...
  34. S

    Metal balls falling from space

    Any idea where these space balls came from? Its speculated that several such balls have dropped in southern Africa, Australia and Latin America in the past 20 years.
  35. M

    Metal detectors for searching metals in the ground

    Metal detectors for searching metals in the ground How they work in one sentence explanation? and second, I've seen some frequency of about 8 kHz mentioned,could that be any possible health risk? Please discuss, thanks.
  36. Spinnor

    Greased metal on wet wood rails, making pyramids.

    Of the materials available to the ancient Egyptians for moving large stone blocks, wooden sleds equipped with flat greased metal runners which might ride on parallel wet greased wooden rails gives a low coefficient of friction? It may not be easy to use such materials to make an efficient...
  37. P

    Hi allWhy does a molten metal solidify with decrease in

    Hi all Why does a molten metal solidify with decrease in temperature. or in other words why is a closed packed structure more stable than an amorphous liquid melt. I have read that the free energy below melting point is lesser for solid state than that of for liquid state at the same...
  38. J

    MATLAB Simulating Metal Plate Heat Variation with Matlab

    I have to simulate in Matlab the variation of temperature in a metal plate/block, heated at just one end. One suggestion I received is that I have to use partial differential equations and the energy balance law but I don't know how to start. I study computer science, so physics is a bit off to...
  39. Krunchyman

    How should a non-cellular metal organism maintain homeostasis?

    So, I'm drafting out a science fiction being. It's a bipedal, anaerobic, autotrophic sentient being that is almost entirely mechanical and it has no DNA or cellular structure - instead, it's physiology is a maze of gears and metal mechanisms (although they do store information somewhat...
  40. F

    Concentric Metal Sphere - Gauss's Law

    1. Please see the attached problem, essentially a metal ball with charge Q1 is surrounded by a grounded shell q which in turn is surrounded by a further shell with charge Q2 Q1. The first question is what is the charge induced on q by Q1 and Q2 Q2. The second question is how is the charge...
  41. beyondlight

    Finding the Electric Field for a Metal Ring in a Magnetic Field

    Homework Statement A metal ring of radius a is located in a region with the homogenous magnetic flux density: \hat{B} =\hat{z}B_0 cos(\omega t) The metal ring coincides with the plane z=0. The frequency w is very low. Use Faraday´s Law to determine the electric field where the metal ring...
  42. C

    Possible title: How Does Water Affect the Force on a Metal Cube in a Vessel?

    A metal cube is placed in an empty vessel. When water is filled in the vessel so that the cube is completely immersed in the water, the force on the bottom of the vessel in contact with the cube : Ans: Will remain the same. But how? Won't the force exerted in the second case,i.e when the...
  43. C

    Fluid Mechanics of a metal cube

    A metal cube is placed in an empty vessel. When water is filled in the vessel so that the cube is completely immersed in the water, the force on the bottom of the vessel in contact with the cube : Ans: Will remain the same. But how? Won't object exert an extra force which will be...
  44. A

    Hollow Metal disc loading - the needed thickness of the disc?

    Hi, how to calculate the limit of load you can place on the top of the circular plate with a quite big circular hole in it (OD 10 cm, ID 5 cm)? the question is how to calculate the thickness needed to bear 1 kg which is spread on the whole area (1 kg heavy object with the same shape as the...
  45. J

    Specific Heat Capacity of metal in water

    Homework Statement An unknown metal with C=3.6 Mass=150g Temp=160c is added to copper container(85g) filled with water(105g) both with an initial temp of 20c I have to find the final temp of water,container and metal Homework Equations none given but I assume it will be E=Cm(t1-t2)...
  46. P

    Correlation between metal strength and melting point?

    I am unsure of this matter and so I am curious, do stronger metals more than likely have higher melting/heating points? Does a metal that takes more force/pressure to break or snap have a higher melting/heating point as well? Do metals/alloys like steel or titanium have higher melting points...
  47. D

    Why do transition metal ions lose s electrons first?

    When transition metal start losing electrons they lose them from the s orbital before the d orbital. Why is this? The iron(II) ion has 24 electrons in this configuration: [Ar] 3d6 The neutral chromium atom also has 24 electrons, but in this configuration: [Ar] 3d5 4s1 I understand that...
  48. G

    Speed of metal melting through ice

    Homework Statement Question no. 4 in this document (there's a helpful picture, too): Homework Equations The Clausius-Clapeyron equation: \frac{\delta p}{\delta \tau}=\frac{l}{\tau ∆v}, where v is the volume per unit mass, i.e., the inverse of the density. The Attempt at a...
  49. P

    Why the surface plasmon always use gold or silver as a metal film?

    I found a lot the the surface plasmon on prism geometry are using gold for metal film, and part of it are using silver. Why we need use gold or sivler as a metal film, is it about the condutivity?
  50. B

    Car engine block/head metal temp limits?

    Good Morning, I am working on a project that is designing a water pump for a car engine without any mechanical parts (works on waste heat building pressure to circulate the water). I know that most of the car engine heads are aluminum and that blocks are part cast steel and part aluminum. In...
Back
Top