What is Metal: Definition and 999 Discussions

A metal (from Greek μέταλλον métallon, "mine, quarry, metal") is a material that, when freshly prepared, polished, or fractured, shows a lustrous appearance, and conducts electricity and heat relatively well. Metals are typically malleable (they can be hammered into thin sheets) or ductile (can be drawn into wires). A metal may be a chemical element such as iron; an alloy such as stainless steel; or a molecular compound such as polymeric sulfur nitride.
In physics, a metal is generally regarded as any substance capable of conducting electricity at a temperature of absolute zero. Many elements and compounds that are not normally classified as metals become metallic under high pressures. For example, the nonmetal iodine gradually becomes a metal at a pressure of between 40 and 170 thousand times atmospheric pressure. Equally, some materials regarded as metals can become nonmetals. Sodium, for example, becomes a nonmetal at pressure of just under two million times atmospheric pressure.
In chemistry, two elements that would otherwise qualify (in physics) as brittle metals—arsenic and antimony—are commonly instead recognised as metalloids due to their chemistry (predominantly non-metallic for arsenic, and balanced between metallicity and nonmetallicity for antimony). Around 95 of the 118 elements in the periodic table are metals (or are likely to be such). The number is inexact as the boundaries between metals, nonmetals, and metalloids fluctuate slightly due to a lack of universally accepted definitions of the categories involved.
In astrophysics the term "metal" is cast more widely to refer to all chemical elements in a star that are heavier than helium, and not just traditional metals. In this sense the first four "metals" collecting in stellar cores through nucleosynthesis are carbon, nitrogen, oxygen, and neon, all of which are strictly non-metals in chemistry. A star fuses lighter atoms, mostly hydrogen and helium, into heavier atoms over its lifetime. Used in that sense, the metallicity of an astronomical object is the proportion of its matter made up of the heavier chemical elements.Metals, as chemical elements, comprise 25% of the Earth's crust and are present in many aspects of modern life. The strength and resilience of some metals has led to their frequent use in, for example, high-rise building and bridge construction, as well as most vehicles, many home appliances, tools, pipes, and railroad tracks. Precious metals were historically used as coinage, but in the modern era, coinage metals have extended to at least 23 of the chemical elements.The history of refined metals is thought to begin with the use of copper about 11,000 years ago. Gold, silver, iron (as meteoric iron), lead, and brass were likewise in use before the first known appearance of bronze in the 5th millennium BCE. Subsequent developments include the production of early forms of steel; the discovery of sodium—the first light metal—in 1809; the rise of modern alloy steels; and, since the end of World War II, the development of more sophisticated alloys.

View More On Wikipedia.org
  1. P

    Attraction force of atoms inside a metal sphere, near a charged plate

    Hi, I have read about electric charge and tried to understand one particular thing but still couldnt: If we positively charge a big metal plate with very high voltage and approach to it a small solid neutral metal sphere, the smaller sphere obviously will get attracted, i.e. a force will...
  2. I

    Find the emf induced in a metal ring rotating in a magnetic field

    First off, sorry if this is a simple question, I'm very bad at electromagnetism. Homework Statement A metal ring of radius R rotates with constant angular velocity ω about a diameter. Perpendicular to the rotation axis is a constant magnetic induction field \underline{B}. Find the EMF...
  3. X

    Question on special case reactions between metal and acid

    I am a GCSE student and I am wondering why copper metal reacts with hot, concentrated sulfuric acid to produce copper (II) sulfate, sulfur dioxide, and water. Copper also reacts with hot, concentrated nitric acid to form copper (II) nitrate, nitrogen monoxide and water. Why do these reactions...
  4. R

    Calc Height Dielectric Oil Coaxial Cylinder Tubes

    Homework Statement Fromm Griffiths Two long coaxial cylindrical metal tubes (inner radius a, outer radius b) stand vertically in a tank of dielectric oil (susceptibility \chi_{epsilon}, mass density \rho. The inner one is maintained at potential V, and the outer one is grounded. To what...
  5. J

    Manufacturing metal sheets of a car frame

    I saw this video of BMW car manufacturing plant on YouTube, and they showed how the robots fix metal sheets of various shapes onto the main frame ("skeleton") of the car. I was wondering: How to they make those metals in those particular shape. On one side there is the frame work, and the...
  6. J

    What is the best model to explain metal cutting?

    When I ask for the best I mean the one which explains better the experiments. My problem is that I tried to learn but I´m a bit confused, I know that metal cutting theory has a large history, and it has had a lot of experimentation but when I try to find the theory it´s like it wouldn´t...
  7. S

    Hanging a glass cryostat from a metal support

    Hi, I'm looking to hang a glass cryostat that has a glass bevelled flange at the top. If the cryostat stands vertically, the flange is angled at 45 degrees. Like this (more or less; the silver underscore is just a place holder to get the shape approximately right): \___/ |__| |__|...
  8. B

    Has path of a standing wave confined in a metal box been measured and described?

    Has path of a standing wave confined inside a metal box been measured and described? I'm thinking path is circular, or, oscillates/bounces back and forth like a pendulum. I'm thinking of a standing wave moving inside a metal rectangular box. Has the path of a standing wave inside a...
  9. T

    Metal complexes - 18electron rule and LFSE.

    Hi The nitro ligand creates a stronger ligand field than the nitrito ligand because Answer a. O is more electronegative than N b. the O atom can be a π-acceptor c. the metal-N bond is shorter d. the N atom can be a π-acceptor e. b and d I ruled out B and therefore E, since oxygen is...
  10. P

    Spinning and heating a metal rod

    Homework Statement There's a metallic rod of length l1 which is spinning around a vertical ax which passes through its center. The ends of the rod are spinning with ω1 angular speed. Homework Equations Determine the temperature at which to heat the metal rod so that the angular speed of...
  11. D

    Temperature generated from crushing metal into powder

    Say I have a brittle metal that I start smashing up with a hammer to crush it into a powder. How do I know how much the material's temperature will rise from this if I assume an average repetitive force crushing onto 5 grams of the material?
  12. N

    Finding the maximum/absolute error in calculating the density of a metal sample.

    Homework Statement "You are measuring the density of a metal sample. You have determined that the mass of the sample is 63.8 grams, and your error in this result is plus or minus 0.1 g. The volume of the sample is 8.8 +/- 0.1 cm^3. What is the maximum error (in g/cm^3) in your measurement of...
  13. D

    LaTeX A light, readily available glue, that can adhere metal to latex.

    Hello, I have next to no materials specific knowledge, so I was hoping someone here could guide me in the right direction. I'm looking for a spreadable adhesive that has the following properties listed by priority: 1. Can adhere metal to latex or other rubber-like materials. 2...
  14. N

    Help with Metal reactions in solutions.

    my class did a metal activity series lab where we added calcium to 8 different solutions. We have to write the net ionic equations for each reaction but I am stuck getting started on them. Ca(s) + Ca(NO3)2(aq) = ? my guess Ca(s) + Ca(NO3)2(aq) + 2H2O(l) --> Ca(OH)2 + H2(g) + Ca(NO3)(aq) This...
  15. P

    I've seen many mentions of metal catalysts why metal? What do they do?

    I know a catalyst is something that speeds up a reaction, usually by lowering the activation energy, by adding intermediate steps, which are not so "high energy". Why metal? What are they doing in the reaction? For example, I've seen platinum mentioned a lot, or also nickel. Do these two...
  16. D

    Voice Coil Selection: Metal Bellow Pressure System

    I hope this post finds everyone well! I am currently trying to build up a system capable of providing pulsatile pressure (a sinusodial profile) to a silicone tube. In brief, the system consists of a linear voice coil actuator connected to a metal bellow. At the moment, I have worked out...
  17. S

    Calculating Work Function of Metal in a Photocell

    Homework Statement In a particular photocell, light with a frequency of 8×10^14Hz is directed onto the cell and it is found that a stopping potential of 1.2V is needed to reduce the photoelectric current to zero. Calculate the work function of the metal in the cell. Homework Equations...
  18. S

    Calculating Initial Potential and Heat of Metal Spheres Collision

    We have a metal sphere of radius R in the space and resistivity p. At a distance d>R from it we have antoher sphere of metal of radius r<<R and charge q. The 2 spheres intially are at rest. What is the initial potential energy between them? Now the sphere accelerate and collide anelastically...
  19. S

    How do you join metal and metal (steel to aluminum)

    hi there, i want to connect two pieces of metal together one is i think a piece of steel capable of being attracted by a magnet and the other piece an aluminum piece, or maybe another metal, but not magnetic at all anyway they're both solid pieces and need to be joined. is brazing or using...
  20. S

    Pauli Principle and Electrons in a Metal

    Why must we apply the Pauli Principle to electrons in a metal? Do they share a many-body wavefunction? The saying is that no two electrons may occupy the same state, but am I allowed to say "well, this electron is at the top of the metal, and there is another one at the bottom, those two are...
  21. H

    A Charged metal Sphere [does charge move around]

    For a charged metal sphere of charge "+q" is the following statement true ? all the excess charge is in static equilibrium The statement basically implies that the excess charge on the surface can't (and does not) move, hence supporting the theory that the Electric Field lines emerging...
  22. S

    Thermo-ish diffusion/wave equation - metal plate and temperature difference

    Homework Statement The edges of a thin plate are held at the temperature described below. Determine the steady-state temperature distribution in the plate. Assume the large flat surfaces to be insulated. If the plate is lying along the x-y plane, then one corner would be at the origin. The...
  23. M

    Metal Rubber: Exploring the Possibilities of Elastic Metallic Materials

    Hello! Is there a metallic material that can have the elasticity properties of a rubber band? Thanks!
  24. T

    If a transmission line falls on your car, is it safe to touch metal inside the car?

    I mean even something tiny, like the seat-adjuster...would that electrocute you to death? Is it possible to touch something plastic and still get electrocuted?
  25. S

    Questions regarding Tensile Testing of metal

    Can anyone explain me how the load is applied to a metal specimen during tensile test? I am confused because I read in my textbook that after the ultimate stress is achieved and if the load is continued, then the metal specimen fails. But from the stress-strain diagram, we can see that the...
  26. C

    Metal tensile strength question

    I have some 1/4" thick 304 stainless steel formed in a 90 degree "L" shape (2 1/4" up x 2" flat x 2" wide. What force is required to bend pc beyound 90 degree mark (let's say to the 100 degree mark)
  27. N

    Best way to obtain/make metal sphere

    Hi everyone. I am part of a team were our aim is to fight off robots which we build for fun. Our design was a ball robot, which simply uses its mass (with high defense hopefully) to 'crush' opponents. Anyway, the problem is I was looking for a metal sphere for our robot, or preferably two...
  28. J

    Metal Stretch Force Calculation (engineering)

    Hi all, I have started working on a challenge at work. We have installed a machine for 'stretch forming'. The machine clamps a long sheet of aluminium at both ends, while a convex shape steel die is raised in the centre. The die is raised by a hydraulic system, causing the metallic sheet...
  29. J

    Reference Request: Understanding Metal Melting

    Apologies in advance for the abstract nature of this question; I don't know enough about this field to be more detailed. I'm trying to understand the behavior of metal when heat is applied to it. I'd like to be able to answer such questions as: how fast does the metal melt? what is the effect on...
  30. S

    How to determine material of metal (magnetism)

    Homework Statement Three bars of metal are known to be brass iron and steel. A magnet was used to distinguish between them. (the metal bars are placed under the south pole of a bar magnet and are used to pick up tacks) Metal 1 picked up 10, metal 2 picked up 6 and metal 3 picked up 2...
  31. I

    Charge placed between two metal plates

    Hi Here is the problem. Two infinite conducting plates 1 and 2 are separated by distance L. A point charge q is located between the plates , at a distance x from plate 1. Find the charges induced on each plate. This is a problem from "Problems in general physics" by Igor Irodov. The...
  32. I

    Four metal plates close to each other

    Homework Statement Hi This is a problem from problem book by russian author, Igor Irodov. Four large metal plates are located at a small distance d from one another as shown in the figure. The extreme plates are connected by a metal wire, while the potential difference V is applied to...
  33. U

    Powder Metallurgy - Metal Injection Molding Equipment Sourcing

    Hi Everyone, We are an Engineering & Services Company mainly working for Power Generations in industrial field, now we have decided to work in powder metallurgy especially in metal injection molding field, for this purpose we need information about the technology & equipment used in this...
  34. M

    Transisiton metal electronic structure question.

    Transisiton metal electronic structure question. :) Hey guys, basically I know that Chromium and Copper "donate" one of their electrons from the 4s sub-shell to the 3d sub-shell. Is this true for ALL transition metals? Any help would be greatly appreciated. :)
  35. H

    Medical Mangan, iron, silver, copper and other metal in blood?

    I was recently asked why the iron in our blood wasn't killing us while iron is poisonous to the body; and what would be if it was other metals than iron in our blood, what would happen?
  36. H

    Stuck on a conductivity question - Conductor in a metal crucuible

    Hey guys, I'm hoping someone can help me out, as i have an exam tomorrow and have no began panicing as I've found a question i can't seem to get to the end of... Here is the question itself; A large crucible contains a metal of thermal conductivity, κ = 12.5 Watts. m-1.K-1, electrical...
  37. N

    Calculate Forces on Tools & Workpieces in Sheet Metal Spinning

    Hi I am a Mechanical Engineering final year student from India. I need to calculate the forces(axial,tangential and radial) on the tool and the workpiece in the sheet metal spinning operation. Is there someway to find it theoretically or using any software? thanks
  38. M

    Force between magnet and metal

    Hello, I am trying to calculate the magnitude of the attractive force between a cylindrical magnet and a sheet of iron. A bit of searching found some equations that can be used to calculate the force between two magnets but I could not find anything related to magnetic force on non...
  39. O

    Medical Any reaction between metal and sensitivity skin?

    Three substances of nickel, chromium and cobalt, lead to dermatitis ratio accounted for 25 substances, the first, third and fourth place. Does anyone have any suggestions on what kind of reactions between metal and sensitivity skin? Thanks in advance for any suggestions
  40. Artlav

    Induction heating of non-magnetic metal?

    I'm experimenting with induction heating, and made a simple ~100W device. Royer oscillator type, 200kHz frequency. It readily heats a steel blade to the point of incandescence. However, a piece of aluminium of a similar size doesn't even get warm. I understand that magnetic hysteresis...
  41. F

    How Does a Neutral Metal Ball Interact with a Nearby Point Charge?

    Homework Statement Find the attractive force between a neturally charged metal ball of radius r and a point charge q, located a distance l from the center of the ball. Also find the work needed to move the charge to infinity. The ball is not grounded. Homework Equations - The...
  42. S

    Magnetic Field through metal sheet

    Why does a metal sheet between two wires not have a shielding effect on the magnetic field? Considering the magnetic force can be explained as the electric field in a different frame. With wires changing frames is a little complicated, but take this simplified situation. In the lab frame...
  43. nukeman

    Need help with IUPAC name of a metal for Physics class.

    Homework Statement One part of this problem is the following: Give the IUPAC name for each of the following: Ti(CO3)2 I thought it would be diTitanium Carbon Trioxide But its apparently Titanium carbonate Can someone please try and explain this better for me so I can...
  44. B

    RFID Scanners: Can Metal Protect?

    Hi, All: Sorry if this is not the right forum. I was just reading that the information in one's wallet can be stolen using an RFID scanner. Also, metal , aluminum supposedly can be used to protect, i.e., I assume, block the signal from coming into the wallet. Is this all correct?
  45. T

    Density of electrons in a metal (electricity)

    Homework Statement A metallic wire has a diameter of 4.12mm. When the current in the wire is 8.00 A, the drift velocity is 5.40 10^-5 m/s What is the density of free electrons in the metal? Express your answer numerically in m^-3 to two significant figures. Homework Equations I=nqv(drift)a...
  46. A

    Metal used to construct Ramshorn Hooks

    I am looking for information on the material, grade and method of manufacture of two ramshorn hooks (each rated at 925 tonnes with a lifting capacity of 37000 tonnes) on a very large floating crane. Any information you can give me would be much appreciated.
  47. S

    Nonlinear conductive liquid metal

    Hi Does nonlinear conductive liquid metal exist? Which and where? thx
  48. F

    Do Cable Trays in Sydney Car Parks Require Individual Earthing?

    I am looking at a building with a car park in Sydney. Electrical circuits are run on perforated cable trays at high level. I understand that the trays require earthing, however, I'm trying to determine the extent. The trays are made from galvanized sheet and come in 3 meter lengths and are...
  49. G

    Piece of metal being carried through an inductor

    Hi, I have some questions about a piece of metal traveling through an inductor with DC current flowing through it. Imagine a solenoid of sorts with a hole in the middle that a piece of neutrally charged metal travels through, sort of like a coil gun. Let's say the inductor has no current...
  50. I

    Relative Density of metal powder

    How can I determine relative density of solids in powdered form? or in other word... How do you determine relative density of metal powder... Thank you..
Back
Top