What is Laser: Definition and 1000 Discussions

A laser is a device that emits light through a process of optical amplification based on the stimulated emission of electromagnetic radiation. The word "laser" is an acronym for "light amplification by stimulated emission of radiation". The first laser was built in 1960 by Theodore H. Maiman at Hughes Research Laboratories, based on theoretical work by Charles Hard Townes and Arthur Leonard Schawlow.
A laser differs from other sources of light in that it emits light which is coherent. Spatial coherence allows a laser to be focused to a tight spot, enabling applications such as laser cutting and lithography. Spatial coherence also allows a laser beam to stay narrow over great distances (collimation), enabling applications such as laser pointers and lidar. Lasers can also have high temporal coherence, which allows them to emit light with a very narrow spectrum. Alternatively, temporal coherence can be used to produce ultrashort pulses of light with a broad spectrum but durations as short as a femtosecond.
Lasers are used in optical disc drives, laser printers, barcode scanners, DNA sequencing instruments, fiber-optic, semiconducting chip manufacturing (photolithography), and free-space optical communication, laser surgery and skin treatments, cutting and welding materials, military and law enforcement devices for marking targets and measuring range and speed, and in laser lighting displays for entertainment. Semiconductor lasers in the blue to near-UV have also been used in place of light-emitting diodes (LED's) to excite fluorescence as a white light source. This permits a much smaller emitting area due to the much greater radiance of a laser and avoids the droop suffered by LED's; such devices are already used in some car headlamps.

View More On Wikipedia.org
  1. reese houseknecht

    Is a Pin-Bar TEA Laser the Key to High-Pressure CO2 Laser Success?

    Now from reading wiki i understand there are Pin-bar and non pin-bar, non pin-bar is what people have moved to today with the spark gap. but i read that "These first 'Pin-Bar' TEA lasers, operating at around one pulse per second, were easy and cheap to construct. By operating at atmospheric...
  2. reese houseknecht

    Calculating how many Joules are required to make a photon

    A double covalent bond of nitrogen (N2) is 15.58eV Now let's go into a example. if i have a laser that is 477nm and i do 1240/477nm then i get 2.6eV per photon. Now if i do (15.58eV / 2.6eV) it equals ~6 photons. Now to figure out how many Joules are required for 1 photon I do (6.626*10^-34S *...
  3. D

    Centering a Laser Beam received from multiple directions

    Is it possible to set mirrors up in such a way that if you hit any area of any of the mirrors, the laser would be brought to a central location in the middle of the mirrors? I'm thinking of a way to transmit data in space via laser where you would want a large target for the laser to hit when...
  4. D

    Methods of Trapping Laser Light

    A) Can the light of a laser be trapped by a spherical mirror. B) would it help to have a liquid in the sphere so as to distribute this light equally throughout the volume of the sphere. Assume laser is shown in the internally spherical constantly. The key is that we want this light to remain in...
  5. U

    Laser Question - Axial Modes & Gain Saturation

    I am studying laser physics at the moment and there is something that confuses me. The laser output consists of the central laser mode and some axial modes due to constructive interference in the optical cavity. At first there is a high enough population inversion and while the laser works this...
  6. C

    Laser Crystals -- effects of crystal size

    Say that I have a neodymium doped yttrium aluminum Garnet (Nd:YAG) laser crystal rod. If I'm using this crystal in a laser, will the size of the crystal affect any characteristics of the laser itself. That is, will a laser containing a 4-by-7 mm Nd:YAG rod operate differently than a laser...
  7. C

    Does the size of a crystal used for a laser affect lifetime?

    I would imagine that it doesn't. I'm really sure how to rationalize this. If emission is a decay process, I don't think the rate constant would change with concentration, and likewise crystal size. Any spectroscopist out there?
  8. S

    B Laser Production: Uncovering the Science and Processes Behind It

    I want to ask several questions regarding laser production: 1. To produce laser, electron needed to be moved from ground state to excited state. Does ground state mean the innermost shell (n = 1) and excited state mean any other shells (n = 2, n = 3, etc)? Can laser be produced if electron is...
  9. Erik Ayer

    I Light amplification with open-ended laser tube

    Is it possible to get a laser tube with the ends unmirrored, designed such that a photon being sent through will have a good chance of stimulating another photon to be emitted? If this is possible, then a beam of light going into the tube would be roughly doubled in intensity. When stimulated...
  10. U

    I Question: Quantum Dot Laser - Energy Band

    Hello I am new here, so it's nice to meet you. I study quantum dot lasers and there is something I don't understand about the energy band diagram. Quantum dots are formed with the Stranski- Krastanov method. For example small InGaAs islands of quantum dots are created on a substrate of InGaAs...
  11. G

    Intersecting 2 continuous laser in thin air to create a dot

    I am planning on making an experiment about intersecting continuous wave laser from 2 or more source on 1 point in thin air. The laser i am planning to use is the simple laser diode, pumped with continuous wave, instead of using pulsed wave as in the usual laser pointer as i don't need it to...
  12. M

    Longitudinal/transverse modes in optical cavity (resonator)

    I am learning about lasers and trying to clear up some blurry concepts in my head so I am not necessary using heavy math for description here so please bear with me. Let's take EM field in a rectangular box with walls that are perfect conductors (optical cavity). EM field distribution inside...
  13. P

    Is it possible to bend a laser beam?

    If so how can we do that?
  14. Evanish

    Question about missile defense systems and lasers

    I was reading a news article about powerful lasers being used in missile defense systems, and I was wondering if multiple weak laser can work together to do the same job as one strong laser. For example can a thousand 1 Kw lasers in different locations be made to point at a single point on a...
  15. Observeraren

    If lasers cross-over, do they "add up"

    Hello, If two lasers cross over, do tehy ionisate each other. If i have sensor in laser measuring ionisation going out etc can it see that laser 2 is crossing over it?
  16. I

    Use of a half wave plate plus polarizer to attenuate lasers?

    The combination of a half-wave plate followed by a polarizer is commonly used as a variable attenuator for polarized lasers. The idea is that the beam enters the half-wave plate, and you rotate the half-wave plate leading to a rotation of the polarization direction of the beam. As the beam is...
  17. NaukowiecGirl

    Uses for laser light in measuring hair width

    I have a question that I feel I cannot find enough on. We just did a practical in Physics class where we used a laser light shined on a single hair strand in order to create a diffraction pattern and use formulae to determine the hair's width. Because of Babinet's principle, the hair managed to...
  18. spareine

    Sketch of the electric field of a laser beam

    I am trying to sketch the electric field E in snapshot of a linearly polarized laser beam. Is it correct that the E vectors bend from vertical to longitudinal near the cylindrical surface of the beam, and that all field lines within a half wave segment are closed loops?
  19. J

    Calculating Nd-YAG Laser Parameters: Beam Size, Power Density, and Peak Power

    Hey guys! I am currently working on some tasks to improve and expand my skills, but I can not go on with the following task An Nd-YAG laser (D=5mm diameter) is focussed with a lens (f = 200mm). I: How big is the laser beam at its waist? (Solved) II: What is the largest bundle behind the lens...
  20. J

    Wavelength and laser basics (ND:YAG)

    Hey guys! I hope my English skills are enough to describe my problems sufficiently.(Homework Statement ) I. Following the following picture, what wavelength should a laser be used to process aluminum? II. What metal surface can be cleaned with a frequency-doubled NDYAG laser? To I: The...
  21. Ravenous Travis

    How strict is the voltage rating on laser diodes?

    Hey everyone, this is semi-related to electrical engineering and a quick search didn't appear to turn anything up regarding this question specifically so I figured this is an appropriate place to ask this. I've bought this laser diode rated for 1.9 - 2.2 volts for a project I'm working on. I've...
  22. Buzz Bloom

    I Measuring distance to a galaxy using natural H20 laser

    Today's Astronomy Picture of the Day discusses a method for determining the distance to a galaxy that I had not seen before. https://apod.nasa.gov/apod/ap170707.html For a far away galaxy, the distance to M106 is well-known in part because it can be directly measured by tracking this galaxy's...
  23. J

    How much can a laser burn through?

    Relatively simple question, I'm new to lasers and just had a basic question. What effects what a laser can burn through? Is it wattage, nm, burn time, or what? Is there an equation for how many Joules it takes to burn through a volume of a given material using specific heat capacities? To ease...
  24. SlowThinker

    Using laser to overcome conservation of etendue

    I was watching a video where the author (Isaac Arthur) says it's possible to use mirrors and lens around a star to focus the energy to boil a planet on the other side of the galaxy. At first it sounds reasonable, surely you have enough energy, but I have doubts that mirrors would be able to do...
  25. SirLollington

    Collimating a laser beam with a fixed focal point?

    Hey, Not sure if this is the correct sub-forum to post this question. I'm still kinda new here, so sorry if I got it wrong :smile: I have a laser module with a fixed focal point of 16 mm and I'm trying to collimate that light into a beam. The point of focused light is at most a quarter...
  26. Scienceislifeforme

    How to Make a Laser That Burns Paper: Tips for Using Multiple Convex Lenses

    I want to make a laser to burn paper so if i use 2 or 3 convex lenses with a laser will it be helpful . Or can i use 1convex then 1 concave and then 1convex to make it
  27. ChrisisC

    Laser and Mirror Thought Experiment

    I have a thought experiment that i need a answer to. In my experiment, I am in a bathroom with a mirror along one wall. I also have a laser that emits a single file line of photons. The laser is attached to the ceiling and emits a line of photons parallel to the mirror. What property of light...
  28. J

    How does a ring laser detect Earth's rotation?

    This is my first time posting here so I hope I am in the right place. So I have read about some scientists who have built a ring laser that is sensitive enought to detec the Earth's rotation. I can get how a ring laser can detect the rotation of a missile say if the laser path is perpendicular...
  29. Fernando

    Two spots with one laser beam in images

    Hello everyone. I have a question about Optics and I place here because I don't know if there are a specific thread. I am using a laser beam to calibrate position of several cameras. But instead of to have one spot in the image I have two spot. One of them is smaller of the other. I presume...
  30. Ella Reid

    Decreasing the power density of a laser

    Hello! I have an issue with the power density of a 488 nm continuous wave laser. I'm using this laser to excite my sample. The problem is that even at low power, the laser is causing the samples to form a burn deposit on the quartz sample holder. Between the laser source and the sample, there...
  31. N

    Decrease in Laser Power: Why Is It Happening?

    Hi, So I am working with measurements using a laser. What I have noticed is that the power of the laser decreases from the time we start the laser until maybe an hour later. Today I noticed it has decreased 10%, from yesterday, which I think sounds like a lot. Does the laser have to warm up and...
  32. camerart

    Transferring Images to PCBs with Laser Prints: A Successful Test

    Hi, I am trying out ideas for using Laser prints to transfer image to PCBs which is resist and allows etching the circuit. Here is a small circuit, attached, showing a successful test. This is approximately 20x40mm. You can see the top 2mm aluminium plate has a sheet of silicon, which spreads...
  33. C

    Laser Physics - Diameter of a Spot on the Moon from a Laser

    Was not sure whether to post here on in the advanced section, since it is part of a final year undergraduate module, yet seems like a pretty simple problem (though I still need help! haha). 1. Homework Statement A frequency doubled Nd:YAG laser (##\lambda = 532##nm) with an initial beam...
  34. C

    Intensity after Laser Round Trip

    Homework Statement Im having trouble understanding where the value of 0.95 came from which takes into account mirror losses. 1 Flat mirror, So no given reflection coefficients as system has no curved mirrors. Given that the distributed cavity Loss coefficient is 10^-4 and the signal gain...
  35. M

    The EM Drive: Exploring the Possibilities of Laser Propulsion

    I just had this thought while watching a video about the EM drive...basically using 2 lasers to bounce them off prisms inside an object to push the craft through space at a small but constant acceleration...could someone explain why this would not work?...please see attached image :)
  36. F

    I Laser vs photodiodes and spectra

    Hi all! I would have two questions, related to laser and photodiodes spectra. 1) We know that lasers produce a very monochromatic radiation, even if they are low to moderatly expensive. That is because the emitted frequency light is dependend on Ec - Ev = Eg which is the bandgap. So electrons...
  37. Jayant Dabas

    Can we create femtosecond laser instead of buying it

    Is there a possible way to redesign femtosecond lasers to reduce cost?
  38. Asmaa Mohammad

    The collimated parallel beam of a LASER

    Homework Statement Multiple-choice question: The LASER beam is a collimated parallel one, that means that its photons have the same... (i) phase (ii) direction (iii) intensity (iv) frequency Attempt at a solution I would exclude frequency because it has nothing to do with the fact...
  39. barryj

    Can a Lens Increase the Power of a Laser Pointer?

    I have a green laser pointer. I assume that the beam is nearly focused a infinity because it does not spread much when shown on a wall. My question is, can I use a lens to focus the beam to a smaller spot. when I see videos about burning laser pointers I do not see any of them using a lens to...
  40. M

    I Determining Appropriate Focal Length

    So I'm working on a project where we're deciding a new lens to use for our laser diode. I need to determine the appropriate focal length based on the equation: 1/ƒ = 1/μ + 1/σ where ƒ is our focal length, μ is the distance from the lens to image and σ is distance from lens to object. For the...
  41. S

    Ultraviolet Laser Beam Shaping With Constraints

    Homework Statement Homework Equations Lens equation 1/f = 1/d_o + 1/d_i Minimum Gaussian beam spot 2*w_0 = ((4 * lamda * F)/(pi * D)) Where: w_0 = beam waist (half beam diameter) lambda = wavelength F = focal length of lens D = diameter of incoming spot Don't forget to match units. Let...
  42. Kara386

    What is the force exerted by a laser pulse on a target?

    Homework Statement A target is hit by a laser pulse. The frequency of the pulse is in the visible spectrum, it has duration ##5\times 10^{−15}## s and it contains approximately ##10^{19}## photons. Estimate the force exerted by the pulse on the target, given the pulse is completely absorbed by...
  43. M

    Setting up a circuit to drive a Laser Diode

    Hello fellow physics friends (alliteration: always a strong opener). I am writing today because I find myself struggling to complete something which ostensibly doesn't seem that difficult to the average physics undergrad working in a lab. However, electronics and circuits are definitely a...
  44. F

    How to get a 30um (micrometer) laser diameter?

    Greetings everyone. I am a mechanical engineering student whose professor challenged him to a project that requires some optics knowledge. After years of quietly reading the physics forums I am finally making my first post. If this question ends up in the wrong forum, feel free to move it to the...
  45. B

    Understanding Laser Safety: Choosing the Right Laser Level for Eye Protection

    https://www.amazon.com/dp/B003JH8Q98/?tag=pfamazon01-20 I plan to purchase the above laser level tool that can project laser in lines.. it has included goggles for safety. There are many devices with lasers now. May I know what is the safe laser level for the eyes and what range or values...
  46. S

    Can a laser be effective in a sandstorm or through ash?

    Could a laser be effective through ash or sand? Could a powerful enough laser burn through sand or ash and work effectively?
  47. L

    Laser Beam Diameter which Minimizes Volume?

    Homework Statement Consider a 10 meter long gas column. We interrogate the gas molecules with a HeNe laser (lambda=633nm) at the minimum possible gas volume. If we focus the beam tightly, it will eventually diverge and the sampled gas volume will increase. Consider a minimum beam diameter D...
  48. Basov

    A How a laser resonator generates the standing wave?

    Hi, guys. I'm interrest in the question about how optical (laser) resonator can generates the standing wave? As i know, there is a condition that the resonator base (lenght between two mirrors) should be multiple to the length of the wave. (L=k*(lamda/2)). But in practice no one never measures...
  49. Antraxius

    Designing a planocovex PMMA lens

    As an electrical engineer, I am an amateur on optics, but I really could use some help. I am making a lens of PMMA, 2D. To 'convert' a rotary movement into a sweep. The lens needs to be 120mm long, with its focus at a max distance of 80mm the light traveling out of the lens needs to be parallel...
  50. P

    Understanding laser power terminology

    I see that many LIDAR systems use power in the millijoule range in atmospheric research. A typical number is 25 millijoules. 25 millijoules is equal to 25 milliwatt/seconds. This means 25 milliwatts for one second. This seems like a tiny amount of power, yet a 25 millijoule laser costs many...
Back
Top