Increasing, non-increasing, decreasing and non-decreasing functions

In summary: A non-decreasing function may still be constant on some intervals (it is allowed to "stay the same" when $x_1 < x_2$). A function that is not decreasing means it is strictly increasing, or strictly decreasing.In summary, an (strictly) increasing function is defined by $x_1 < x_2 \implies f(x_1) < f(x_2)$, while a non-decreasing function is defined by $x_1 < x_2 \implies f(x_1) \leq f(x_2)$. The dual terms for these are (strictly) decreasing and non-increasing, respectively. Non-decreasing functions may have "flat spots" where they
  • #1
ozkan12
149
0
Please can you give definitions of increasing, non-increasing, decreasing and non-decreasing functions ? I found something but there is a lot of differents between these definitions...Can you give these definitions ? Thank you so much, Best wishes :)
 
Physics news on Phys.org
  • #2
A (strictly) increasing function $f$ is one where $x_1 < x_2 \implies f(x_1) < f(x_2)$.

A non-decreasing function $f$ is one where $x_1 < x_2 \implies f(x_1) \leq f(x_2)$.

The dual terms are (strictly) decreasing and non-increasing (reverse the direction of the inequalities), respectively.

Most functions are none of the four, these properties are SPECIAL.
 
  • #3
Dear Deveno,

First of all, thank you for your attention...İn some books, I saw some definitions

For example, they give these definitions as follows,

A (strictly) increasing function $f$ is one where ${x}_{1}\le{x}_{2}\implies f\left({x}_{1}\right)<f\left({x}_{2}\right)$

A non-decreasing function ${x}_{1}\le{x}_{2}\implies f\left({x}_{1}\right)\le f\left({x}_{2}\right)$

That is, they use "$\le$" instead of "<" to array ${x}_{1}$ and ${x}_{2}$...İs there any difference these definitions ?
 
  • #4
Not really, the $\leq$ for the $x_1,x_2$ is unnecessary in the definition of non-decreasing, we always have for ANY function $f$:

$x_1 = x_2 \implies f(x_1) = f(x_2)$

so that does not contain any information.

$x_1 \leq x_2$ means: $x_1 = x_2$ or $x_1 < x_2$.

If $x_1 = x_2$, then $f(x_1) = f(x_2)$, so certainly $f(x_1) \leq f(x_2)$ is true (one of the two possibilities:

$f(x_1) = f(x_2)$ or $f(x_1) < f(x_2)$ is true, namely the former).

The important thing is that non-decreasing functions might have "flat spots", for example they could be constant on some interval (like step-functions corresponding to riemann sums for an increasing function).

EDIT: Using $\leq$ for a strictly increasing function leads to falsehoods: if $x_1 = x_2$, we can NEVER have $f(x_1) < f(x_2)$.
 
  • #5
Dear Deveno, thank you for your help and support :) Best wishes :)
 
  • #6
Dear Deveno

Also, Can we say that if " ${x}_{1}\le{x}_{2}$" $f{x}_{1}\le f{x}_{2}$ for definition of non-decreasing function ? That is, can we use "$\le$" instead of "$<$" for ${x}_{1}$ and ${x}_{2}$ ? Thank you for your attention, Best wishes :)
 
  • #7
ozkan12 said:
Can we say that if " ${x}_{1}\le{x}_{2}$" $f{x}_{1}\le f{x}_{2}$ for definition of non-decreasing function ? That is, can we use "$\le$" instead of "$<$" for ${x}_{1}$ and ${x}_{2}$ ?
This has been answered in post #4. The properties
\[
x_1\le x_2\implies f(x_1)\le f(x_2)
\]
and
\[
x_1< x_2\implies f(x_1)\le f(x_2)
\]
are equivalent.

Also note that "non-decreasing" is not the same as "not decreasing".
 

Related to Increasing, non-increasing, decreasing and non-decreasing functions

1. What is the difference between increasing and non-increasing functions?

Increasing functions are those where the output (y-value) increases as the input (x-value) increases. Non-increasing functions, on the other hand, are those where the output either stays the same or decreases as the input increases.

2. How can you determine if a function is decreasing?

A function is considered decreasing if the output decreases as the input increases. This means that the slope of the function is negative.

3. Can a function be both increasing and decreasing?

No, a function cannot be both increasing and decreasing at the same time. The terms "increasing" and "decreasing" are used to describe the overall trend of the function, and they cannot coexist.

4. What is a non-decreasing function?

A non-decreasing function is one where the output either stays the same or increases as the input increases. This means that the slope of the function is either positive or zero.

5. How do you graph an increasing or decreasing function?

To graph an increasing function, start from the left side of the graph and draw a line that goes up as you move towards the right side. For a decreasing function, start from the left side of the graph and draw a line that goes down as you move towards the right side.

Similar threads

  • Topology and Analysis
Replies
2
Views
1K
  • Topology and Analysis
Replies
9
Views
2K
  • Topology and Analysis
Replies
3
Views
2K
  • General Engineering
Replies
2
Views
590
Replies
2
Views
273
  • Introductory Physics Homework Help
Replies
19
Views
2K
  • Topology and Analysis
Replies
9
Views
3K
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
21
Views
1K
  • Topology and Analysis
Replies
2
Views
1K
Back
Top