What is Equilibirium: Definition and 65 Discussions

In thermodynamics and chemical engineering, the vapor–liquid equilibrium (VLE) describes the distribution of a chemical species between the vapor phase and a liquid phase.
The concentration of a vapor in contact with its liquid, especially at equilibrium, is often expressed in terms of vapor pressure, which will be a partial pressure (a part of the total gas pressure) if any other gas(es) are present with the vapor. The equilibrium vapor pressure of a liquid is in general strongly dependent on temperature. At vapor–liquid equilibrium, a liquid with individual components in certain concentrations will have an equilibrium vapor in which the concentrations or partial pressures of the vapor components have certain values depending on all of the liquid component concentrations and the temperature. The converse is also true: if a vapor with components at certain concentrations or partial pressures is in vapor–liquid equilibrium with its liquid, then the component concentrations in the liquid will be determined dependent on the vapor concentrations and on the temperature. The equilibrium concentration of each component in the liquid phase is often different from its concentration (or vapor pressure) in the vapor phase, but there is a relationship. The VLE concentration data can be determined experimentally, approximated with the help of theories such as Raoult's law, Dalton's law, and Henry's law.
Such vapor–liquid equilibrium information is useful in designing columns for distillation, especially fractional distillation, which is a particular specialty of chemical engineers. Distillation is a process used to separate or partially separate components in a mixture by boiling (vaporization) followed by condensation. Distillation takes advantage of differences in concentrations of components in the liquid and vapor phases.
In mixtures containing two or more components, the concentrations of each component are often expressed as mole fractions. The mole fraction of a given component of a mixture in a particular phase (either the vapor or the liquid phase) is the number of moles of that component in that phase divided by the total number of moles of all components in that phase.
Binary mixtures are those having two components. Three-component mixtures are called ternary mixtures. There can be VLE data for mixtures with even more components, but such data is often hard to show graphically. VLE data is a function of the total pressure, such as 1 atm or at the pressure the process is conducted at.
When a temperature is reached such that the sum of the equilibrium vapor pressures of the liquid components becomes equal to the total pressure of the system (it is otherwise smaller), then vapor bubbles generated from the liquid begin to displace the gas that was maintaining the overall pressure, and the mixture is said to boil. This temperature is called the boiling point of the liquid mixture at the given pressure. (It is assumed that the total pressure is held steady by adjusting the total volume of the system to accommodate the specific volume changes that accompany boiling.) The boiling point at an overall pressure of 1 atm is called the normal boiling point of the liquid mixture.

View More On Wikipedia.org
  1. Logan Johnston

    Explaining The Non-Reaction Of An Iron Nail With Equilibrium

    The question asks: Recall that you observed very little corrosion occurring on the iron nail immersed in NaOH(aq) solution. This observation is difficult to explain from an electrochemistry perspective since electrochemistry principles predict a spontaneous reaction that should cause...
  2. W

    What Is the Minimum Angle to Keep the Boxes Stationary on an Inclined Plane?

    Homework Statement 9.12) The mass of the box on the left is 30kg and the mass of the box on the right is 40kg. The coefficient of static friction between each box and the inclined plane is μs = 0.2. Determine the minimum angle α for which the boxes will remain stationary. Homework Equations...
  3. G

    Newton's 3rd law and force equilibrium

    Hi. Assume a rock lying on the ground. Furthermore, let's assume both the rock and Earth to be rigid bodies. I'm a bit confused about force equilibrium and Newton's 3rd law here. There's Earth's gravity acting on the rock, and by Newton's 3rd law (or just by looking at the law of gravity) the...
  4. W

    How Do You Calculate the Reactions at Supports in a 3D Equilibrium Problem?

    Homework Statement The 1.1m bar is supported by a ball and socket support at A and 2 smooth walls. The tension in the vertical cable CD is 1kN. Draw the Free Body Diagram of the Bar. Determine the Reactions at A and B. Homework Equations Equillibrium equations. Perhaps the vector...
  5. W

    Free body diagram of pin support and cable

    Homework Statement A) Draw a free body B) determine the tension in rope A and the reactions in B. Homework Equations [/B] Standard equilibrium equations The Attempt at a Solution My free body shows a collinear force T through the rope, the given downward force at 5ft, and then a Bx and By...
  6. B

    Equilibrium Process for Calculating Tension in a Tight-Rope Walker's Wire

    Homework Statement A 60 kg tight-rope walker carries a long beam with a mass of 30 kg across a 10 m long wire. When she is at the centre of the wire (i.e. 5 m across), each section of the wire makes an angle of 5° to the horizontal. Assuming that the mass of the wire is negligible, calculate...
  7. lonely_nucleus

    Direction of equilibrium if you remove heat from exothermic reaction

    If you remove heat from an exothermic reaction will the equilibrium shift to the products or to the reactants according to le chatelier's principle
  8. M

    Center of mass vs center of support of equilibrium

    Homework Statement Where is the difference between center of support of equilibrium and center of mass of system. For example we are given a ruler with length L and mass M and two builds with mass m1 and m2 on its edges. Homework Equations http://imgur.com/PiGA817 The Attempt at a Solution I...
  9. M

    How many bricks can be put without disordering the equilibrium

    Homework Statement A homogenous brick with length L, is on a horizontal surface. On this brick are put one after another other bricks, which are the same with the first. Every brick is moved along L/5 units horizontally from the predecessor one. How many bricks can be put without disordering...
  10. M

    Find the weight of a sphere connected to a pulley and to wall

    Homework Statement The system of 2 spheres is in equilibrium. Figure: . If the weight of the second sphere P2=20N, ABC=60 degrees and BAC=30 degrees, find the weight of the first P1 and the force that is applied on the drum of the pulley. Homework Equations P1=m*a The Attempt at a Solution...
  11. It's me

    Callen Thermodynamics 2.8-2 matter flow equilibrium

    Homework Statement A two component gaseous system has a fundamental equation of the form $$S=AU^{1/3} V^{1/3} N^{1/3} + \frac{BN_1N_2}{N}$$ where $$N=N_1+N_2$$ and A and B are positive constants. A closed cylinder of total volume 2V_0 is separated into two equal subvolumes by a rigid diathermal...
  12. G

    Equilibrium modelling in kraft mills

    Hi, I've been working with equilibrium modelling in bleach plants of kraft mills in order to find areas likely of being subjected to mineral scale deposits. This has been rather successful - and it's been done successfully be many people before me. However, now I am interested in applying...
  13. B

    Finding the Center of Mass of a Suspended Scaffold and Paint Cans System

    Homework Statement A horizontal scaffold, of length 2.00 m and uniform mass 50.0 kg, is suspended from a building by two cables. The scaffold has dozens of paint cans stacked on it at various points. The total mass of the paint cans is 80.0 kg. The tension in the cable at the right is 830 N...
  14. P

    Two beams hanging in equilibrium

    Homework Statement Two identical, uniform beams weighing 260 N each are connected at one end by a friction-less hinge. A light horizontal crossbar attached at the midpoints of the beams maintains an angle of 53 degrees between the beams. The beams are suspended from the ceiling by vertical...
  15. V

    Solve Torque w/ 2 Supports & Equilibrium Problems Easily

    1. A 6.0 m long uniform plank is balanced on two supports with are 3.7 m apart. The plank weighs 400N. If one of the supports is 0.5m fro one end of the plank, how far from the other end can a 65 kg load hang without the plank tipping over? and A 7.2 m long beam AB weighing 480 N has its...
Back
Top