Understanding Refrigeration & Reverse Carnot Cycle

In summary, the refrigeration cycle is compared to a reverse Carnot cycle, which is an ideal case for maximum efficiency. However, real refrigerators do not follow this cycle due to phase transitions in the working substance. The compressor compresses the refrigerant adiabatically, and then heat is removed by blowing warm outside air over the tubes of a heat exchanger. The condensed liquid refrigerant then flows into the evaporator inside the house where it evaporates and cools the house air. This process creates an isothermal stage outside the house.
  • #1
john t
33
3
The refrigeration cycle is often likened to a reverse Carnot cycle. I pretty much understand the Carnot cycle, but in relating it to a household refrigerator, I am lost.

Where is the adiabatic compression done on the machine (inside vs. outside) , and where is the adiabatic expansion?

How is the change from insulated conditions (providing) q=0 to isothermal (providing delta E =0) accomplished?
 
Last edited by a moderator:
Engineering news on Phys.org
  • #2
Just like an internal combustion engine does not follow a Carnot cycle, a real refrigerator does not follow a reversed Carnot cycle. The Carnot cycle is just an ideal case, which happens to correspond to the highest efficiency/coefficient of performance possible.

For a real refrigerator, the actual cycle is (slightly) complicated due to the fact that the working substance undergoes a phase transition during the cycle.
 
  • #4
When you refer to "inside" and "outside", I assume you are referring to central air conditioning, with the evaporator located above your furnace and the rest of the equipment outside the house. The refrigerant vapor (that has been returned by tubing from the Evaporator inside the house to the Compressor outside the house) is compressed "adiabatically" in the Compressor. Then, after the Compressor, there is warm outside air blowing over the tubes of a heat exchanger (also outside) to remove heat and condense the vapor. The condensed liquid refrigerant then flows through tubes into your house where it enters the Evaporator (at a lower pressure than the Compressor). The evaporator is just another heat exchanger where your house air from your ductwork is blown over the tubes. When the refrigerant evaporates in this heat exchanger, the house air is cooled.
 
  • #5
Thanks, Chestermiller. I guess the warm air brings about the "isothermal" stage outside the house, where the temperature of the gas remains relatively constant and heat is given up.
 

Related to Understanding Refrigeration & Reverse Carnot Cycle

1. What is the basic principle behind refrigeration?

The basic principle behind refrigeration is the transfer of heat from a cooler environment to a warmer environment. This is achieved through the use of a refrigerant, which undergoes a cycle of compression, condensation, expansion, and evaporation to absorb heat from the surrounding environment and release it elsewhere.

2. What is the role of the reverse Carnot cycle in refrigeration?

The reverse Carnot cycle is the theoretical basis for all refrigeration systems. It explains the relationship between temperature, pressure, and heat transfer in a closed system. In a refrigeration system, the reverse Carnot cycle is used to manipulate the refrigerant and control the transfer of heat.

3. How does a refrigerator keep food cold?

A refrigerator uses a compressor to compress the refrigerant gas, which increases its temperature. The hot gas then flows through a condenser, where it releases heat and condenses into a liquid. The liquid refrigerant then passes through an expansion valve, which causes it to expand and cool down. This cold liquid then flows through the evaporator, where it absorbs heat from the food inside the refrigerator, keeping it cold.

4. What are the different types of refrigeration systems?

There are several types of refrigeration systems, including vapor compression, absorption, and magnetic refrigeration. Vapor compression systems are the most commonly used and work by compressing and expanding a refrigerant gas. Absorption systems use a heat source to drive the refrigeration process, while magnetic refrigeration uses a magnetic field to cool the refrigerant.

5. How can we improve the energy efficiency of refrigeration systems?

One way to improve the energy efficiency of refrigeration systems is by using more efficient compressors and heat exchangers. Additionally, regular maintenance and proper insulation can also help to reduce energy consumption. Another approach is to use alternative refrigerants with lower global warming potential, such as hydrocarbons or CO2. Advancements in technology, such as variable speed compressors and smart sensors, can also contribute to improving the efficiency of refrigeration systems.

Similar threads

  • Thermodynamics
Replies
2
Views
142
Replies
1
Views
809
Replies
1
Views
1K
Replies
1
Views
857
Replies
2
Views
1K
  • Classical Physics
Replies
2
Views
7K
Replies
5
Views
2K
  • Thermodynamics
Replies
1
Views
1K
Back
Top