Phase change of reflected wave - is there a polarization dependence?

In summary, for a light wave in air (n1=1) reflected off a glass surface (n2=1.5), the Fresnel equations (theta=0deg) show that rp (perpendicular polarization) indicates no phase shift while rs (parallel polarization) indicates a 180deg phase shift. This is true for normal incidence, where all incident waves have the same horizontal polarization. At the Brewster angle, the polarization becomes plane.
  • #1
jeic
2
0
Does a light wave in air (n1 = 1) that is reflected off a glass surface (n2=1.5) experience a 180deg phase change? Looking at the Fresnel equations (theta = 0deg) I learn that:

according to http://en.wikipedia.org/wiki/Fresnel_equations

rp = (n2-n1)/(n1+n2) = 0.2 and rs = (n1-n2)/(n1+n2) = -0.2

rp indicates no phase shift, while rs does indicate at 180 deg phase shift (rs is negative).

Intuitively, the phase shift should not depend on polarization at normal incidence (theta = 0deg). How do I understand the above formulas? What if the polarization is circular?
 
Science news on Phys.org
  • #2
For normal incidence, all incident waves have, effectively, the same (horizontal) polarisation because the field vectors are parallel with the plane of the reflecting surface. It's just a consequence of 'feeling' the geometry. Distinguishing between HP and VP is easy for large angles of incidence (glancing contact) but the parallel component of an incident VP wave gets larger as the angle of incidence approaches zero and the normal component goes to zero.

After reflection for non-normal incidence, circularly polarised EM is no longer circular. At the Brewster angle, the polarisation becomes Plane.
 

Related to Phase change of reflected wave - is there a polarization dependence?

1. What is the phase change of a reflected wave?

The phase change of a reflected wave refers to the change in the position of the wave's crests and troughs after it bounces off a boundary or interface. This change in position can result in either constructive or destructive interference depending on the phase difference between the incident and reflected wave.

2. Is there a difference in phase change based on the polarization of the incident wave?

Yes, the phase change of a reflected wave does depend on the polarization of the incident wave. If the incident wave is linearly polarized, the phase change will be different for waves with different orientations of polarization. However, for circularly polarized waves, the phase change will be the same regardless of the direction of polarization.

3. How does the angle of incidence affect the phase change of a reflected wave?

The angle of incidence does not have a direct effect on the phase change of a reflected wave. However, it does affect the amplitude and intensity of the reflected wave, which can indirectly impact the phase change through interference effects.

4. Can the phase change of a reflected wave be controlled or manipulated?

Yes, the phase change of a reflected wave can be controlled and manipulated through various techniques such as using polarizers, mirrors, and optical coatings. These methods can alter the polarization state and angle of incidence of the incident wave, thereby affecting the phase change of the reflected wave.

5. Does the medium through which the wave is reflected have any influence on the phase change?

Yes, the medium through which the wave is reflected can have an impact on the phase change. This is because the refractive index of the medium affects the speed of the wave, which in turn affects the wavelength and phase of the reflected wave. Different materials, such as dielectric or metallic surfaces, can result in different phase changes of the reflected wave.

Similar threads

Replies
2
Views
1K
Replies
1
Views
845
Replies
2
Views
2K
Replies
12
Views
1K
Replies
2
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
754
Replies
4
Views
8K
Replies
2
Views
1K
Back
Top