Is overall bill reduced by using fan regulators

  • Thread starter CRT
  • Start date
  • Tags
    Fan
In summary: You are paying some for the heat generated by the resistor, but overall you save money since the watt-hours that you are billed for is current* 230V* time.thanks sir.In summary, a fan regulator is a device that can be used to alter the speed of a fan, and it can provide different values of resistance. It is used in India, and it gets hotter if you increase the resistance. Some hums can be caused by vibrations in wires, and these vibrations may cause sound when they increase in energy. If you have an electronics box that contains a transformer, it may produce a humming sound.
  • #1
CRT
21
2
actually i searched a lot regarding this question but didnt find exact answer anywhere.some say electricity bill reduces some vice versa.do all extra voltage is dissipated as heat? in the regulator,or current drawn remains same or only partially dissipated as heat.Thanks.
 
Engineering news on Phys.org
  • #2
CRT said:
actually i searched a lot regarding this question but didnt find exact answer anywhere.some say electricity bill reduces some vice versa.do all extra voltage is dissipated as heat? in the regulator,or current drawn remains same or only partially dissipated as heat.Thanks.

Could you please provide some more context to your question? What's a fan regulator? Where is it being used?
 
  • Like
Likes CRT
  • #3
http://maxelectrical.tradeindia.com/fan-regulator-1133953.html a fan regulator is a device put in series with fan to alter its speed.it can provide different value of resistance through a rotatory switch numbered 1 ,2,3,4,5.At position 5 the speed of fan is max.at 1 its min.as resistance of regulator is max.at that position.http://maxelectrical.tradeindia.com/fan-regulator-1133953.html
 
  • #4
sorry the url was not uploaded.its here-
maxelectrical.tradeindia.com/fan-regulator-1133953.html
 
  • #5
CRT said:
sorry the url was not uploaded.its here-
maxelectrical.tradeindia.com/fan-regulator-1133953.html
it has been designed for India 230v/50hz.it gets hotter if we increse its resistance through rotary switch(to position4,3,2,1),but the fan slows down.as it gets reduced voltage now.sorry if i am still not able to elaborate.
 
  • #6
download.jpg
 
  • #7
IMG_20150502_095225_1.jpg
 
  • #8
The current drawn from the mains will reduce as you slow the fan with a series resistor, so the power bill will reduce. You are paying some for the heat generated by the resistor, but overall you save money since the watt-hours that you are billed for is current* 230V* time.
 
  • #9
thanks sir.but i wanted to know one more thing.my inverter was producing humming sound one day,the moment i slowed down my fan the sound was silent.was it due to reduced current drawn or a little bit improved power factor.
is variation in current in ac circuit as well as dc circuit upon introduction of new resistance is same way?
 
  • #10
If the electronics box contains a transformer (or a smoothing inductor) this can produce a humming sound if the current in its wires is great enough. At lower currents, this hum may not be noticeable. Some hums can be mechanical vibrations due to something being lose or flexible, perhaps some turns on an inductor coil are not firmly glued down, or the core of a transformer may not be tightly held together.

If these loose areas don't vibrate much they may not contact anything to make noise, but when they vibrate a little bit more they hit something solid and cause produce sound. The more energy in a coil, the more energetic they will vibrate.
 
  • Like
Likes CRT
  • #11
thanks for your precious time for answering sir.
 
  • Like
Likes NascentOxygen
  • #12
CRT said:
http://maxelectrical.tradeindia.com/fan-regulator-1133953.html a fan regulator is a device put in series with fan to alter its speed.it can provide different value of resistance through a rotatory switch numbered 1 ,2,3,4,5.At position 5 the speed of fan is max.at 1 its min.as resistance of regulator is max.at that position.[PLAIN]http://maxelectrical.tradeindia.com/fan-regulator-1133953.html[/QUOTE]
This is unlikely to insert varying resistances in series with the fan. This probably electronically switches just a portion of each AC cycle through the fan, thus reducing the average voltage and hence reducing the fan's speed. The part of the voltage that isn't used by the fan represents saved power, rather than wasted power (generating heat) that you would see with added resistance.
 
Last edited by a moderator:
  • #13
The device in post #6 is most likely an inductor with variable taps. Last ones I installed for ceiling fans used this approach and looked very similar to what was posted.
 
  • Like
Likes NascentOxygen

Related to Is overall bill reduced by using fan regulators

1. What is a fan regulator?

A fan regulator is a device used to control the speed of an electric fan. It is typically installed between the fan and the power source and allows the user to adjust the fan's speed by changing the voltage or current supplied to the fan motor.

2. How does a fan regulator reduce overall bill?

A fan regulator reduces overall bill by controlling the amount of electricity consumed by the fan. By reducing the fan's speed, the regulator decreases the amount of energy needed to power the fan, resulting in lower electricity bills.

3. Is it more energy-efficient to use a fan regulator?

Yes, using a fan regulator can lead to more energy-efficient cooling compared to running the fan at its highest speed. By adjusting the fan's speed according to the room's temperature, a fan regulator can help save energy and reduce electricity bills.

4. Can using a fan regulator prolong the lifespan of a fan?

Yes, using a fan regulator can help prolong the lifespan of a fan. Running a fan at high speeds for extended periods of time can put strain on the motor and other components, leading to wear and tear. By using a fan regulator to adjust the fan's speed, you can reduce this strain and extend the fan's lifespan.

5. Are there different types of fan regulators available?

Yes, there are different types of fan regulators available, such as electronic, step-type, and rotary-type regulators. Electronic regulators use solid-state components to control the fan's speed, while step-type regulators have different speed settings that can be manually selected. Rotary-type regulators use a dial or knob to adjust the fan's speed.

Similar threads

  • Electrical Engineering
Replies
10
Views
2K
Replies
4
Views
1K
  • Mechanical Engineering
Replies
15
Views
1K
Replies
18
Views
2K
  • Electrical Engineering
Replies
10
Views
2K
  • Electrical Engineering
Replies
12
Views
1K
  • Electrical Engineering
Replies
18
Views
27K
Replies
4
Views
23K
  • Electrical Engineering
Replies
21
Views
5K
Replies
2
Views
2K
Back
Top