- #1
nima_kheradhoosh
- 2
- 0
- TL;DR Summary
- How to introduce a variable phase shift in AC signal generated from a VFD.
Hey fellas,
I’m trying to apply a variable phase shift (0 to 180 degrees) on an AC signal generated from a Variable Frequency Drive (VFD). The frequency is variable and ranged between 10 and 50 Hz. the voltage amplitude is also variable between 10-50Volts (this shouldn’t be a problem I suppose).
One solution I could find was using Thyristor’s firing angle, but it also needs a delay line on its way, which makes me confused.
Any help would be greatly appreciated.
Thanks
I’m trying to apply a variable phase shift (0 to 180 degrees) on an AC signal generated from a Variable Frequency Drive (VFD). The frequency is variable and ranged between 10 and 50 Hz. the voltage amplitude is also variable between 10-50Volts (this shouldn’t be a problem I suppose).
One solution I could find was using Thyristor’s firing angle, but it also needs a delay line on its way, which makes me confused.
Any help would be greatly appreciated.
Thanks