ADC converter question about the LSB

In summary, the problem is asking to show the relationship between the least significant bit (LSB) and the change in analog signal of V/(2^N-1). The formula D=b_0 * 2^0 +b_1 * 2^1 + ... + b_(N-1) * 2^(N-1) is given, where b_0 is the LSB and b_(N-1) is the MSB. The goal is to determine the number of volts that will be converted into 000...001, given a 5 volt chip with a range of 0 to 5 volts and a maximum bit value of 111...1.
  • #1
lcr2139
62
1

Homework Statement


Show that the least significant bit (LSB) corresponds to a change in the analog signal of V/(2^N-1).


Homework Equations


D=b_0 * 2^0 +b_1 * 2^1 + ... + b_(N-1) * 2^(N-1), where b_0 is the LSB, and b_(N-1) is the MSB.



The Attempt at a Solution


I have absolutely have no idea what they are asking or how to solve it. I tried using the fact that 0 means logic 0 (off) and V means logic 1 (on). I think that the change in analog signal that they are talking about means that from when the bit number changes from the LSB to the next bit number, the change in amplitude of the analog signal. I tried that fact that 2^0 equals 1, and plugged that into the given expression, but that still did not make any sense. Does "correspond" mean that the LSB is proportional, or equal to the change in analog signal?
How can I solve this problem?
 
Physics news on Phys.org
  • #2
You have a 5 volt chip. The lowest value it can read is 0 volts and that's a 0 after conversion. The largest value is for 5 volts and will be read as all bits = 11111...1.

The question is, how many volts will get converted into 000...001?
 
  • #3
Thank you very much! This helped a lot.
 

Related to ADC converter question about the LSB

1. What is an ADC converter and how does it work?

An ADC (Analog-to-Digital Converter) is a device that converts analog signals into digital signals that can be processed by a computer. It works by taking a continuous voltage input and converting it into a discrete digital value by dividing the input voltage into smaller increments.

2. What is the significance of the LSB in an ADC converter?

The LSB (Least Significant Bit) is the smallest increment of the digital output in an ADC converter. It represents the lowest possible change in the digital value and determines the accuracy of the conversion. The smaller the LSB, the higher the resolution and accuracy of the ADC converter.

3. How is the LSB determined in an ADC converter?

The LSB is determined by the number of bits used in the digital output of the ADC converter. For example, if an ADC has a 12-bit output, the LSB would be 1/(2^12) or 0.000244 volts. This means that the ADC can detect changes in the input voltage as small as 0.000244 volts.

4. Can the LSB be changed in an ADC converter?

No, the LSB is a fixed value determined by the number of bits used in the digital output of the ADC converter. However, the resolution and accuracy of the ADC can be improved by using a higher number of bits or by using a different type of ADC with a smaller LSB.

5. What are some factors that can affect the LSB in an ADC converter?

The LSB of an ADC converter can be affected by noise, inaccuracies in the analog input signal, and errors in the conversion process. It is important to consider these factors when designing and using an ADC converter to ensure accurate and reliable results.

Similar threads

  • Engineering and Comp Sci Homework Help
Replies
1
Views
1K
  • Engineering and Comp Sci Homework Help
Replies
10
Views
2K
  • Engineering and Comp Sci Homework Help
Replies
10
Views
4K
  • Engineering and Comp Sci Homework Help
Replies
3
Views
2K
  • Engineering and Comp Sci Homework Help
Replies
9
Views
3K
  • Engineering and Comp Sci Homework Help
Replies
4
Views
4K
  • Engineering and Comp Sci Homework Help
Replies
2
Views
1K
  • Engineering and Comp Sci Homework Help
Replies
2
Views
1K
  • Engineering and Comp Sci Homework Help
Replies
3
Views
982
  • Engineering and Comp Sci Homework Help
Replies
6
Views
2K
Back
Top