-9.3.15 A tank contains 200 gal of fresh water

  • MHB
  • Thread starter karush
  • Start date
  • Tags
    Tank Water
In summary, a tank contains 200 gal of fresh water and a solution containing 2 lb/gal of soluble lawn fertilizer runs into the tank at the rate of 1 gal/min. The mixture is pumped out of the tank at the rate of 5 gal/min. The maximum amount of fertilizer in the tank is 33.1 lb and it is reached in 29.52 minutes.
  • #1
karush
Gold Member
MHB
3,269
5
$\tiny{9.3.15}$
4000
A tank contains 200 gal of fresh water. A solution containing 2 lb/gal of soluble lawn fertilizer runs into the tank at the rate of 1 gal/min, and the mixture is pumped out of the tank at the rate of 5 gal/min. Find the maximum amount of fertilizer in the tank and the time required to reach the maximum.
 
Last edited:
Physics news on Phys.org
  • #2
this very mymathlab problem was also posted on mhf but was ?

and its due today ... but having got all the preveous problems right got very baffled on this one
the sanple problem was of little help.

I thought it was just a simple related rates but not.
 
Last edited by a moderator:
  • #3
karush said:
$\tiny{9.3.15}$
A tank contains 200 gal of fresh water. A solution containing 2 lb/gal of soluble lawn fertilizer runs into the tank at the rate of 1 gal/min, and the mixture is pumped out of the tank at the rate of 5 gal/min. Find the maximum amount of fertilizer in the tank and the time required to reach the maximum.
Let X(t) bet the amount of fertilizer, in lbs, in the tank at time t, in min, with t= 0 when they begin pumping the solution in. Initially the tank contains no fertilizer so X(0)= 0. The tank originally contained 200 gals, then 1 gal per minute of liquid comes in and 5 gal per minute goes out, so there is a net loss of 1- 5= -4 gals per minute. The amount of liquid in the tank at time t is 200- 4t gal.

The concentration of fertilizer, in lbs per gallon, in the tank at time t is the amount of fertilizer in the tank, in lbs., at that time divided by the amount of liquid, in gallons, [tex]\frac{X(t)}{200- 4t}[/tex]. Since there are 5 gallons per minute going out, the amount of fertilizer going out is 5 gallons/minute times [tex]\frac{X(t)}{200- 4t}[/tex] pounds/gallon= [tex]\frac{1000- 20t}{200- 4t}[/tex] pounds per minute.

So the amount of fertilizer in the tank changes because there is, at each time, t, 2 pounds/min of fertilizer going in and [tex]\frac{1000- 20t}{200- 4t}[/tex] pounds per minute going out. So rate at which the amount of fertilizer is changing is [tex]\frac{dX}{dt}= 2- \frac{1000- 20t}{200- 4t}= \frac{400- 8t- 1000+ 20t}{200- 4t}= \frac{12t- 600}{200- 4t}= \frac{3t- 150}{50- t}[/tex]. Write that as [tex]dX= \frac{3t- 150}{50- t}dt[/tex] and integrate both sides. There will be, of course, a "constant of integration". Use the initial condition X(0)= 0 to determine the value of that constant.
 
  • #4
Write that as $\displaystyle dX= \frac{3t- 150}{50- t}dt$ and integrate both sides. There will be, of course, a "constant of integration". Use the initial condition X(0)= 0 to determine the value of that constant.

do you mean like this

\begin{align*}\displaystyle
\int_a^b dX&= \int_a^b \frac{3t- 150}{50- t} \, dt \\
x&=\left[3t\right]_a^b
\end{align*}

looks :confused:

not sure where $x(0)=0$ goes
 
  • #5
I would let $F(t)$ be the amount of fertilizer in the tank at time $t$. From the problem statement, we get the following IVP:

\(\displaystyle \d{F}{t}=2-\frac{F}{4(50-t)}\) where $F(0)=0$

Write the ODE in linear form:

\(\displaystyle \d{F}{t}+\frac{F}{4(50-t)}=2\)

Now, we need to compute the integrating factor:

\(\displaystyle \mu(t)=\exp\left(\int \frac{1}{4(50-t)}\right)=\left(4(50-t)\right)^{-\frac{1}{4}}\)

Multiplying through by $\mu(t)$, we obtain:

\(\displaystyle \left(4(50-t)\right)^{-\frac{1}{4}}\d{F}{t}+\left(4(50-t)\right)^{-\frac{5}{4}}F=2\left(4(50-t)\right)^{-\frac{1}{4}}\)

Next, we observe that the LHS may we written as:

\(\displaystyle \frac{d}{dt}\left(\left(4(50-t)\right)^{-\frac{1}{4}}F\right)=2\left(4(50-t)\right)^{-\frac{1}{4}}\)

Okay, what do you get when you integrate through w.r.t $t$?
 
  • #6
$\displaystyle \frac{d}{dt}\left(\left(4(50-t)\right)^{-\frac{1}{4}}F\right)=2\left(4(50-t)\right)^{-\frac{1}{4}}$
integrate both sides
$\displaystyle (4(50-t))^{-1/4}F=\frac{4\sqrt{2}}{3}(50-t)^{3/4}$
$F=\frac{8}{3}(50-t)$the answer was 29.5 min and 32.8 lb
 
Last edited:
  • #7
I made a mistake in my above post...the IVP should be:

\(\displaystyle \displaystyle \d{F}{t}=2-\frac{5F}{4(50-t)}\) where $F(0)=0$.

So, this leads to:

\(\displaystyle \mu(t)=\left(4(50-t)\right)^{-\frac{5}{4}}\)

\(\displaystyle \left(4(50-t)\right)^{-\frac{5}{4}}\d{F}{t}+5\left(4(50-t)\right)^{-\frac{9}{4}}F=2\left(4(50-t)\right)^{-\frac{5}{4}}\)

\(\displaystyle \frac{d}{dt}\left(\left(4(50-t)\right)^{-\frac{5}{4}}F\right)=2\left(4(50-t)\right)^{-\frac{5}{4}}\)

Integrate:

\(\displaystyle \left(4(50-t)\right)^{-\frac{5}{4}}F=2\left(4(50-t)\right)^{-\frac{1}{4}}+C\)

\(\displaystyle F(t)=2\left(4(50-t)\right)+C\left(4(50-t)\right)^{\frac{5}{4}}\)

We know:

\(\displaystyle F(0)=2\left(4(50)\right)+C\left(4(50)\right)^{\frac{5}{4}}=0\)

Hence:

\(\displaystyle C=-2(200)^{-\frac{1}{4}}\)

And so:

\(\displaystyle F(t)=2\left(4(50-t)\right)-2(200)^{-\frac{1}{4}}\left(4(50-t)\right)^{\frac{5}{4}}\)

I will leave it to you to show that the maximum occurs at:

\(\displaystyle t=\frac{738}{25}=29.52\)
 
  • #8
again my great thanks.
ill probably just try another similar problem.

really appreciate all the steps you showed.

☕
 

Related to -9.3.15 A tank contains 200 gal of fresh water

1. How do you calculate the volume of the tank?

The volume of the tank can be calculated by multiplying the length, width, and height of the tank. For example, if the tank is a rectangular prism with dimensions of 10 ft by 5 ft by 4 ft, the volume would be 10 x 5 x 4 = 200 cubic feet. To convert to gallons, multiply the volume in cubic feet by 7.48, which in this case would be 200 x 7.48 = 1496 gallons.

2. How much water does the tank hold?

The tank contains 200 gallons of fresh water. This is the total capacity of the tank when it is completely filled.

3. How many liters of water is 200 gallons?

200 gallons is equivalent to approximately 757 liters of water. To convert gallons to liters, multiply the number of gallons by 3.785.

4. What is the density of the water in the tank?

The density of water is 1 gram per cubic centimeter or 1000 kilograms per cubic meter. Since 1 gallon is equal to 3.785 liters, the density of water in the tank would be approximately 1000 x 3.785 = 3785 grams per gallon.

5. How long will the water in the tank last?

This depends on the usage rate of the water. If the tank is being used to supply water to a household, the duration of the water supply will depend on the daily water usage of the household. However, if the tank is not being used and the water is not being replenished, the water might become stagnant and unfit for consumption after a few weeks.

Similar threads

  • Differential Equations
Replies
5
Views
4K
  • Differential Equations
Replies
6
Views
2K
  • Calculus and Beyond Homework Help
Replies
3
Views
3K
  • Differential Equations
Replies
2
Views
3K
Replies
50
Views
4K
  • Engineering and Comp Sci Homework Help
Replies
8
Views
2K
Replies
1
Views
2K
  • Calculus and Beyond Homework Help
Replies
3
Views
2K
  • Mechanical Engineering
Replies
24
Views
2K
Replies
6
Views
3K
Back
Top