What is the name for a pulse of current?

In summary, DC refers to a steady state unidirectional current, while AC refers to a periodic changing current. A single-polarity pulse of rising current that does not change polarity but changes amplitude is considered a DC pulse, but may also be referred to as a current spike or combination of DC and AC. A step function is another term for a Heaviside function. It is important to clarify the terminology to avoid confusion.
  • #1
hogshead
11
0
A steady state electrical current is called DC. A periodic rising and falling current is called AC. What is a single-polarity pulse of rising current ( a single rectified hump of a sine wave e.g.) called? AC? DC? or something else?
 
Engineering news on Phys.org
  • #3
hogshead said:
A steady state electrical current is called DC. A periodic rising and falling current is called AC. What is a single-polarity pulse of rising current ( a single rectified hump of a sine wave e.g.) called? AC? DC? or something else?

DC is a unidirectional current (or voltage) but not necessarily a constant one.
http://en.wikipedia.org/wiki/DC_current

An AC current or voltage is not a rising and falling one. It is one which changes polarity from positive to negative to positive and so on.

A pulse which does not change polarity but changes amplitude is just a DC pulse. However this needs to be supplemented with information about rise time, duration, fall time, repetition rate etc.
 
  • #4
Current spike.

Claude
 
  • #5
A step function is often called a Heaviside Function.

DC means, strictly, an unchanging value of current. Unidirectional current may be referred to as DC but it is sloppy terminology and leads to confusion. If you want to avoid confusion then don't refer to anything other than DC as DC. (despite what may be written in wiki or elsewhere) A current that is always positive but has a varying value is a combination of DC and AC ('ripple'). If you state it that way then there can be no confusion.
 

Related to What is the name for a pulse of current?

1. What is a pulse of current?

A pulse of current refers to a short burst of electrical energy that flows through a circuit. It is often described as a sudden increase in electrical current followed by a rapid decrease.

2. What causes a pulse of current?

A pulse of current can be caused by a number of factors, such as the switching on or off of a power source, a sudden change in voltage, or the discharge of a capacitor.

3. What is the name for a pulse of current?

The technical term for a pulse of current is a transient current or a transient pulse.

4. How is a pulse of current different from a continuous current?

A pulse of current is a short burst of energy that occurs for a specific duration, whereas a continuous current is a steady flow of energy over time. Additionally, pulses of current typically have higher amplitudes and shorter durations compared to continuous currents.

5. What are some common applications of pulses of current?

Pulses of current are used in various applications, such as in electronic circuits for data transmission, in medical devices for diagnostics and treatment, and in industrial equipment for welding and cutting.

Similar threads

  • Electrical Engineering
Replies
10
Views
2K
Replies
19
Views
2K
Replies
6
Views
2K
  • Electrical Engineering
Replies
18
Views
4K
Replies
9
Views
2K
Replies
3
Views
1K
  • Electrical Engineering
Replies
1
Views
1K
  • Electrical Engineering
Replies
2
Views
6K
Replies
1
Views
3K
  • Electrical Engineering
Replies
1
Views
2K
Back
Top