What Forces Determine a Submarine's Diving Trajectory?

  • Thread starter yoyo
  • Start date
  • Tags
    Submarine
In summary: What happens to the net force on the submarine in each case? The net force will be in the same direction as the thrust, so the submarine will travel in the direction of the thrust. The only difference will be the speed at which it travels.
  • #1
yoyo
21
0
A submarine of mass m is diving at a 45 degree angle which means that the submarine's propulsion system is generating constant thrust T in the direction of the given angle. Assume that the density of the submarine is d1 and the density of water is d2. Further, assume that there is no resistance to motion.

a) List the forces acting on the submarine and draw an appropriate diagram.
-I think the forces that are acting on the submarine is gravity, force normal,buoyancy, but I'm not sure of what other forces there may be.

b) Examine the forces that you listed and draw a conclusion about the trajectory of the submarine.
- Have no idea of what the trajectory due to the forces are. Can someone please explain?

c) Set up a coordinate system to describe the motion (the x-axis can be the surface of the ocean, the submarine's initial location can be put at the origin) Write down Newton's equations and solve them assuming that the submarine did not have any initial velocity.
- I understand how to setup the coordinate system, but having trouble with setting up Newton's equation and solving it.

d) Plot three trajectories of the submarine for the cases d1>d2, d1=d2, and d1<d2, Label each trajectory accordingly.
- i have very little experience with plotting trajectories...can somebody help?
 
Last edited:
Physics news on Phys.org
  • #2
a) List the forces acting on the submarine and draw an appropriate diagram.
-I think the forces that are acting on the submarine is gravity, force normal,buoyancy, but I'm not sure of what other forces there may be.
Well, since you were told there is a thrust, T, don't you think you should include that? And what is "force normal"? Normal to what?
I see thrust, bouyancy, and gravity.

b) Examine the forces that you listed and draw a conclusion about the trajectory of the submarine.
- Have no idea of what the trajectory due to the forces are. Can someone please explain?
The submarine will accelerate in the direction of the net force (F= ma). Which direction do you think the net force is in?

c) Set up a coordinate system to describe the motion (the x-axis can be the surface of the ocean, the submarine's initial location can be put at the origin) Write down Newton's equations and solve them assuming that the submarine did not have any initial velocity.
- I understand how to setup the coordinate system, but having trouble with setting up Newton's equation and solving it.
Newton's equation IS F= ma. The reference to Newton's equationS means you want to use that for each of the x, y, z directions.

d) Plot three trajectories of the submarine for the cases d1>d2, d1=d2, and d1<d2, Label each trajectory accordingly.
- i have very little experience with plotting trajectories...can somebody help?

You will find that the trajectories are straight lines. What happens to bouyancy in each of the cases given?
 
  • #3


a) The forces acting on the submarine are gravity, thrust, buoyancy, and drag (assuming no resistance to motion). A diagram of the forces can be drawn with the submarine at the origin and the forces acting in different directions: gravity acting downwards, thrust acting at a 45 degree angle, buoyancy acting upwards, and drag acting opposite to the direction of motion.

b) Based on the forces acting on the submarine, we can conclude that the submarine will continue to dive deeper into the water due to the constant thrust and gravity acting downwards. The buoyancy force will counteract the weight of the submarine, but it may not be enough to stop the submarine from diving deeper. The lack of resistance to motion also means that there will be no force opposing the submarine's motion, allowing it to continue its trajectory.

c) Setting up a coordinate system with the x-axis as the surface of the ocean and the origin at the submarine's initial location, Newton's equations can be written as follows:

ΣF = ma, where ΣF is the sum of all forces acting on the submarine, m is the mass of the submarine, and a is the acceleration.

In the x-direction: ΣFx = Tcos45° - Drag = ma
In the y-direction: ΣFy = Tsin45° - mg + Buoyancy = ma

Solving these equations with the given information, we can determine the acceleration of the submarine in both the x and y directions, and therefore, its trajectory.

d) To plot the trajectories, we can use the equations we derived in part c and input different values for d1 and d2. The three cases are:
- d1>d2: In this case, the submarine will sink deeper into the water due to the higher density of the submarine compared to water. This will result in a steeper trajectory.
- d1=d2: If the densities are equal, the submarine will maintain a constant depth as the buoyancy force will perfectly balance the weight of the submarine. The trajectory will be horizontal.
- d1<d2: In this case, the submarine will float upwards due to the higher density of water compared to the submarine. The trajectory will be upwards, but not as steep as the first case.

Labeling each trajectory accordingly, we can plot them on a graph with depth (y-axis) and time (x-axis). The resulting graph will show the different trajectories for each case.
 

Related to What Forces Determine a Submarine's Diving Trajectory?

1. What is the "Submarine diving problem"?

The "Submarine diving problem" is a mathematical problem that involves determining the maximum depth that a submarine can reach without imploding due to the increasing water pressure. It takes into account various factors such as the material and shape of the submarine, the depth of the water, and the strength of the submarine's hull.

2. How is the "Submarine diving problem" solved?

The "Submarine diving problem" is solved using a mathematical equation known as the "Thin-Walled Pressure Vessel Equation". This equation takes into account the factors mentioned above and calculates the maximum depth that a submarine can reach without imploding.

3. What are the main challenges of the "Submarine diving problem"?

The main challenges of the "Submarine diving problem" include accurately determining the material and shape of the submarine, as well as the strength of its hull, which can vary depending on the design and construction of the submarine. Additionally, the depth and pressure of the water must also be carefully considered in the calculation.

4. Are there any real-life applications of the "Submarine diving problem"?

Yes, the "Submarine diving problem" has real-life applications in the design and construction of submarines, as well as in other underwater structures such as pipelines and oil rigs. It is crucial for ensuring the safety and effectiveness of these structures in deep-sea environments.

5. Can the "Submarine diving problem" be solved for all types of submarines?

No, the "Submarine diving problem" cannot be solved for all types of submarines. The equation used to solve the problem assumes that the submarine has a thin-walled, cylindrical shape, which is not the case for all submarines. Submarines with complex shapes and designs may require different equations or methods to determine their maximum diving depth.

Similar threads

  • Mechanical Engineering
Replies
5
Views
605
  • Introductory Physics Homework Help
Replies
3
Views
2K
  • Quantum Interpretations and Foundations
Replies
15
Views
347
  • Introductory Physics Homework Help
Replies
3
Views
777
  • Introductory Physics Homework Help
Replies
31
Views
1K
Replies
3
Views
754
  • Introductory Physics Homework Help
Replies
15
Views
2K
  • Advanced Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
7
Views
1K
  • Introductory Physics Homework Help
Replies
10
Views
716
Back
Top