Vapor Pressure Help: Solving \DeltaHvap w/ Assumptions

In summary, the conversation revolved around a completed lab where a graduated cylinder was filled with water and inverted into a water bath heated to 80 degrees Celsius. The volume of the air bubble was measured as it cooled to 50 degrees Celsius and at 1 degree Celsius. The questions asked were related to the vapor pressure at different temperatures and its impact on the value of \DeltaHvap. The equation Ln(P2) - Ln(P1) = -\DeltaH/R ( !/T2 - 1/T1) was discussed and it was concluded that \DeltaHvap= 3.18 * 10^4 J/mol. Three assumptions were also mentioned in obtaining the results of the lab, which included the
  • #1
StephenDoty
265
0
Hello all

I completed a lab last week where we filled a graduated cylinder up 90% of the way with water and inverted it into a water bath and then we heated the bath to 80 degrees Celsius then measured the volume of the air bubble as it cooled to 50 degrees Celsius and at 1 degree Celsius.

My questions are given vapor pressure at 39.5 degrees Celsius is 400 torr. at 7.7 degrees Celsius the vapor pressure is 100 torr. What is the value for [tex]\Delta[/tex]Hvap?

Ln(P2) - Ln(P1) = -[tex]\Delta[/tex]H/R ( !/T2 - 1/T1)

[tex]\Delta[/tex]Hvap= 3.18 * 10^4 J/mol
right??

And three assumptions made in obtain results in this lab would be:
1. the bubble of air follows the ideal gas laws and not other equations like the van deer walls equation.
2. there isn't any other pressures besides the atmosphere pressure, the water vapor pressure, and the pressure of the air. or that the atmosphere pressure stays the same.
3. that the air is homogeneous and will fill the volume evenly with an exact number of particles, mols, in the bubble.

Are these three assumptions ok?

Thanks for the help everyone.
Stephen
 
Physics news on Phys.org
  • #2
StephenDoty said:
Are these three assumptions ok?

Can't think of better ones.
 
  • #3
great! thanks.
but is Delta Hvap= 3.18 * 10^4 J/mol
right??
 

Related to Vapor Pressure Help: Solving \DeltaHvap w/ Assumptions

1. What is vapor pressure?

Vapor pressure is the pressure exerted by the vapor of a substance in equilibrium with its liquid or solid form at a given temperature.

2. How is vapor pressure related to temperature?

Vapor pressure increases with temperature because as temperature rises, more molecules have enough energy to escape from the liquid or solid phase and enter the vapor phase.

3. What is \DeltaHvap?

\DeltaHvap, also known as enthalpy of vaporization, is the amount of heat required to convert one mole of a substance from its liquid phase to its vapor phase at a given temperature and pressure.

4. What are some common assumptions when solving for \DeltaHvap?

Some common assumptions when solving for \DeltaHvap include assuming ideal gas behavior, neglecting any changes in volume or pressure during the phase change, and assuming a constant temperature during the phase change.

5. How can \DeltaHvap be determined experimentally?

\DeltaHvap can be determined experimentally by measuring the temperature and pressure at which a substance undergoes a phase change from liquid to vapor, and using this information to calculate the enthalpy change using the Clausius-Clapeyron equation.

Similar threads

  • Biology and Chemistry Homework Help
Replies
1
Views
6K
  • Engineering and Comp Sci Homework Help
Replies
14
Views
823
  • Biology and Chemistry Homework Help
Replies
2
Views
8K
  • Biology and Chemistry Homework Help
Replies
2
Views
3K
  • Biology and Chemistry Homework Help
Replies
2
Views
3K
Replies
12
Views
5K
  • Biology and Chemistry Homework Help
Replies
1
Views
12K
  • Introductory Physics Homework Help
Replies
2
Views
1K
  • Biology and Chemistry Homework Help
Replies
6
Views
12K
Replies
13
Views
3K
Back
Top