Using a wall wart to replace batteries

In summary, the wall wart read 60 volts when it was plugged into the correct outlet, but when I measured the batteries in the remote ball the remote was on, the positive to positive and -2 negative readings were reversed. The needle only moved forward when I switched the readings around.
  • #1
GiTS
135
0
I have this dc heli called protocol. It charges from the remote which uses 6 aa batteries. So I got a 9 V wall wart. There's a couple problems with the wallwart when I used my analog multimeter to read the voltage it was reading 60 V. When I measured the batteries in the remote ball the remote was on I put positive to positive and -2 negative but the needle turned backward only when I switched around so that positive was on negative and negative was on positive did the needle move forward. Same thing when I turn the remote off everything was plugged into the proper place.

So my questions are I just need this to charge the helicopter can I use a cell phone Walworten or would I have the same problem? Do I need to build a voltage regulator?
 
Engineering news on Phys.org
  • #2
GiTS said:
I have this dc heli called protocol. It charges from the remote which uses 6 aa batteries. So I got a 9 V wall wart. There's a couple problems with the wallwart when I used my analog multimeter to read the voltage it was reading 60 V. When I measured the batteries in the remote ball the remote was on I put positive to positive and -2 negative but the needle turned backward only when I switched around so that positive was on negative and negative was on positive did the needle move forward.
There is not a lot I can say, but are you sure that you didn't have the meter on reverse? Some meters have a switch making the leads effectively reversed. A wall wart that reads 60V sounds suspect. You did have it on the correct DC setting?

Your 6 AA cells, are they NiCd? What are the cells in the helicopter?

So the usual procedure is to charge the cells in the remote from a general purpose household charger, and then charge the helicopter from that remote?

There may exist a RC hobby forum where you could garner specialist help. Though your subject line in Physics Forums is not as inviting of RC buffs as you could have made it. Perhaps ask a moderator to change the title to include remote control helicopter.
Good luck!
http://img803.imageshack.us/img803/4666/holly1756.gif
 
Last edited by a moderator:

Related to Using a wall wart to replace batteries

1. How does using a wall wart to replace batteries work?

Using a wall wart involves connecting an external power source to a device that would normally use batteries. The wall wart typically has a DC output that matches the voltage and polarity required by the device, allowing it to function without the need for batteries.

2. Can I use any wall wart to replace batteries?

No, it is important to use a wall wart with the correct voltage and polarity for your device. Using the wrong wall wart can damage your device or cause it to malfunction.

3. Is it safe to use a wall wart instead of batteries?

Yes, as long as you use a wall wart with the correct specifications for your device. It is also important to ensure that the wall wart is in good condition and does not have any exposed wires or damaged parts.

4. Are there any benefits to using a wall wart instead of batteries?

Using a wall wart eliminates the need for constantly purchasing and replacing batteries, making it a more cost-effective and environmentally friendly option. It also ensures that your device will always have a reliable power source.

5. Can I still use my device while it is connected to a wall wart?

Yes, you can continue to use your device while it is connected to a wall wart. Just make sure to unplug it when not in use to avoid wasting electricity.

Similar threads

Replies
8
Views
1K
  • Electrical Engineering
Replies
17
Views
3K
  • Electrical Engineering
Replies
6
Views
1K
Replies
5
Views
1K
  • Electrical Engineering
Replies
2
Views
1K
Replies
8
Views
1K
  • Electrical Engineering
Replies
10
Views
953
  • Electrical Engineering
2
Replies
58
Views
6K
  • Electrical Engineering
Replies
26
Views
3K
  • Electrical Engineering
Replies
6
Views
2K
Back
Top