Model rocket (velocity and time equation help please)

In summary, a model rocket is fired vertically upward from rest and has an acceleration of 60t for the first three seconds until the fuel is exhausted. After 14 seconds, the rocket's parachute opens and its velocity decreases linearly to -18 ft/sec in 5 seconds, before eventually floating to the ground at a constant speed. To find the position and velocity functions for any time t, the acceleration function must be integrated twice, taking into account the different stages of motion.
  • #1
Duke77
7
0
A model rocket is fired vertically upward from rest. Its acceleration for the first three seconds is a(t)=60t, at which time the fuel is exhausted and it becomes a freely “falling” body. Fourteen seconds after the fuel is exhausted, the rocket’s parachute opens, and the (downward) velocity slows linearly to -18 ft/sec in 5 seconds. The rocket then “floats” to the ground at that rate. Find the position function s and the velocity function v for any time t, then sketch the graphs of s and v.

This is the whole question and I don't expect help with the graphs but if I could get some help on the problem I would appreciate it greatly.
 
Physics news on Phys.org
  • #2
one step at a time

Attack it step by step.

For T = 0, 3 secs: Integrate the acceleration function (twice) to find expressions for v and s.
For T = 3, 14 secs: It's a projectile. Uniform acceleration due to gravity.
For T = 14, 19 secs: the acceleration is given
For T > 19 secs: uniform speed

It's a pain in the butt, but you can do it!
 
  • #3


To find the position function s and velocity function v for any time t, we can use the equations of motion:

s(t) = s0 + v0t + (1/2)at^2

v(t) = v0 + at

Where s0 is the initial position, v0 is the initial velocity, a is the acceleration, and t is the time.

In this case, we are given that the rocket is fired from rest, so s0 = 0 and v0 = 0. We can also determine the acceleration for the first three seconds using the given information:

a(t) = 60t

a(3) = 60(3) = 180 ft/sec^2

So for the first three seconds, the position function is:

s(t) = (1/2)(180)t^2 = 90t^2 ft

And the velocity function is:

v(t) = (180)t ft/sec

After the fuel is exhausted, the rocket becomes a freely falling body, so the acceleration due to gravity is -32 ft/sec^2. We are given that the parachute opens after 14 seconds, so we can use this information to find the velocity at that time:

v(14) = (180)(14) - (32)(14) = 1960 - 448 = 1512 ft/sec

For the next 5 seconds, the velocity slows linearly to -18 ft/sec, so we can use the slope formula to find the acceleration during this time:

a = (vf - vi)/(tf - ti) = (-18 - 1512)/(5 - 14) = 1494/-9 = -166 ft/sec^2

Using this acceleration, we can find the position function for the next 5 seconds:

s(t) = 1512(5) + (1/2)(-166)(5)^2 = 7550 ft

Finally, after the rocket reaches a velocity of -18 ft/sec, it continues to fall at a constant rate until it reaches the ground. This means that the velocity function is constant at -18 ft/sec for the remaining time. We can use this information to find the position function for the last part of the flight:

s(t) = 7550 + (-18)(t-19) = 7550 - 18t + 342 = -18t + 7892 ft

Therefore,
 

1. What is the equation for calculating the velocity of a model rocket?

The equation for calculating the velocity of a model rocket is v = u + at, where v is the final velocity, u is the initial velocity, a is the acceleration, and t is the time.

2. How do you determine the initial velocity of a model rocket?

The initial velocity of a model rocket can be determined by measuring the distance the rocket travels in a known amount of time, and using the equation v = d/t, where v is the initial velocity, d is the distance, and t is the time.

3. How does the mass of a model rocket affect its velocity?

The mass of a model rocket does not directly affect its velocity, but it does affect its acceleration. A heavier rocket will have a slower acceleration compared to a lighter rocket with the same amount of thrust, but both rockets can reach the same velocity over time.

4. Can the velocity of a model rocket be changed during its flight?

Yes, the velocity of a model rocket can be changed during its flight by adjusting the amount of thrust from the engine or by changing the angle of the rocket's fins. The velocity can also be affected by external factors like wind resistance.

5. How do you calculate the time it takes for a model rocket to reach a certain velocity?

The equation for calculating time is t = (v-u)/a, where t is the time, v is the final velocity, u is the initial velocity, and a is the acceleration. By rearranging the equation, you can solve for t when given the other variables.

Similar threads

  • Introductory Physics Homework Help
Replies
2
Views
231
  • Introductory Physics Homework Help
Replies
12
Views
2K
  • Introductory Physics Homework Help
Replies
30
Views
2K
  • Introductory Physics Homework Help
Replies
5
Views
1K
  • Introductory Physics Homework Help
2
Replies
42
Views
3K
  • Introductory Physics Homework Help
Replies
2
Views
1K
  • Introductory Physics Homework Help
Replies
4
Views
1K
  • Introductory Physics Homework Help
Replies
2
Views
1K
  • Introductory Physics Homework Help
Replies
1
Views
717
  • Introductory Physics Homework Help
Replies
2
Views
815
Back
Top