Discover the Basics of Alternating Current in Electrical Circuits

In summary, alternating current, or AC, is a type of electrical current where the positive and negative terminals of the voltage source alternate periodically. This creates a cyclical flow of electrons, with a frequency determined by the time it takes to switch the terminals. This is in contrast to direct current, or DC, where the flow of electrons is constant and in one direction.
  • #1
RuroumiKenshin
What is alternating current?
 
Computer science news on Phys.org
  • #2
http://www.geocities.com/vijayakumar777/electricity/electricity.html

Or for the quick and easy version...

Analogies!

Imagine a circular track full of ballbearings or marbles or something. All packed in tight, so if you push on anyone of them, they all move around the track.

Now imagine that over a section of that track is a waterwheel-type thing; a wheel with paddles or cogs spaced so as to come down between balls as the wheel turns, and give them a push around the track. DC current is that wheel; it goes around in one direction and pushes the balls (charge) around the track in one direction constantly.

Now imagine that instead of that waterheel type thing, we have a pin or axis rotating about the vertical axis above that section of the track, with a paddle poking out to one side. The pin is in the track, so that as it turns, the paddle pushes the ring of balls first one way, then the other, constantly changing direction. This is AC current. At any point along the track, at any moment, there will be balls coming toward that point or moving away from that point, depending on which way along the track you are looking.
 
  • #3
or for the nonanalogical...

Let me first define direct-current, or DC, voltage sources. A direct-current source has a positive end and a negative end, i.e. a battery, and when a wire is attached to both ends, (called a closed circuit,) electrons flow from the negative end to the positive end.

For an alternating-current, or AC, voltage source, it works the same way except that the positive end and negative end keep trading places periodically. That is, at first the positive end is at the "top" and the negative end at the "bottom", the current flows from the bottom to the top, then it alternates and the "top" is now negative with the "bottom" positive and the current flows from the top to the bottom. Then it alternates again, and again, and again...
The time it takes to switch the positive and negative "sides", or terminals, we call the Period of the AC current, from this we can get the Frequency of the AC current, which is 1/Period.
 

1. What is alternating current (AC)?

Alternating current is a type of electrical current that reverses direction at regular intervals. It is the most commonly used type of current in electrical circuits, and is typically used to power household appliances, electronics, and other devices.

2. How does alternating current differ from direct current (DC)?

The main difference between alternating current and direct current (DC) is that AC changes direction periodically, while DC flows in one direction. AC is also able to travel longer distances without losing as much power as DC, making it more practical for transmitting electricity over long distances.

3. What are the advantages of using alternating current?

One of the main advantages of using alternating current is its ability to be easily converted to different voltages using transformers. AC also has the ability to travel longer distances without losing as much power as DC, making it more practical for powering large areas.

4. How is alternating current produced?

Alternating current is produced through the use of a device called an alternator, which converts mechanical energy into electrical energy. The alternator uses a rotating magnetic field to induce an alternating current in a set of stationary coils.

5. What are some common uses of alternating current?

Alternating current is used in a wide variety of applications, such as powering household appliances, electronics, and lighting. It is also used in industrial settings to power machinery and equipment. AC is also the type of current used in power grids to distribute electricity to homes and businesses.

Similar threads

  • Electromagnetism
Replies
11
Views
727
  • Classical Physics
Replies
23
Views
1K
  • Electrical Engineering
Replies
19
Views
2K
  • Electrical Engineering
Replies
2
Views
575
Replies
3
Views
524
  • Electromagnetism
Replies
5
Views
294
Replies
22
Views
1K
Replies
25
Views
1K
  • Electromagnetism
Replies
4
Views
1K
Replies
3
Views
1K
Back
Top