Is there a portable CO2 generation system for off-grid use?

In summary: We are interested in developing and commercializing this technology. The goal is to produce fuel that is both sustainable and affordable.
  • #1
Gunny
4
0
Does anyone know of a portable CO2 generation system capable of producing between 100-150 CFM 24/7/365? This system will be used off grid, and needs to be powered by either biofuel or electricity.

Thank you.

<<Moderator note: Manual signature message removed.>>
 
Last edited by a moderator:
Engineering news on Phys.org
  • #2
Gunny said:
Does anyone know of a portable CO2 generation system capable of producing between 100-150 CFM 24/7/365? This system will be used off grid, and needs to be powered by either biofuel or electricity.

Thank you.

What'cha going to use the CO2 for? :smile:

I Googled making CO2 and got lots of good hits. Have you tried that yet? Maybe you can find a technique that gives you other byproducts that you can use as well.
 
  • #3
berkeman said:
What'cha going to use the CO2 for? :smile:

I Googled making CO2 and got lots of good hits. Have you tried that yet? Maybe you can find a technique that gives you other byproducts that you can use as well.

Yes, several of my staff have scoured the web for sustainable CO2 generation options. Our application is unique requiring 100CF CO2 per hour 24/7/365 to supply our algae bioreactor. The remote off grid geographical locations make it exorbitantly expensive to resupply scheduled products or sub components. Also unknown events such as a hurricane, typhoon, or war demand that we are 100% sustainable. Thank you kindly for your suggestion.
 
  • #4
100 cubic feet per minute (post 1) or per hour (post 3)? That is a massive difference.
At 1.6 kg/m^3, those 100 cubic feet have a mass of 4.4 kg, which requires burning about 1.6 kg of hydrocarbons. Assuming this is per hour, a modified car engine should be able to handle that, and produce useful mechanical energy at the same time. A car is not portable in the classical sense, but it can port itself. It will produce some other gases as well and you still have ~80% nitrogen, of course. Are other gases an issue?
 
  • #5
My first thought was about burning charcoal, but mfb's idea seems to be even better, as you can use the engine to produce electricity and make your installation independent.
 
  • #6
I played with algae for a couple of years and concluded the same. At a minimum, about 40-50% of an algae-derived fuel is needed to run the generators for the farm [or bioreactors]. And the exhaust from that provides a ready supply of not only CO2, but by using a diesel engine, nitrogen, which represents a significant savings in the cost of production. In fact it might be possible to modify a diesel engine to provide 100% of the required nitrogen [beginning as NOx and then reacting it with water]. In principle it seemed that you should be able to recover the phosphorous and potassium as well. But we never addressed that possibility directly.

Also, my working hypothesis was that the diesel engine acts as an air purifier [due to the high temps and pressures], which provides significant cost savings, as opposed to HEPA filters and the energy required to run an air supply system. Just the energy cost of the aeration system can be a killer! In a typical engine, you have about 3 psi to work with by removing the muffler, which is more than enough for the aeration.
 
Last edited:
  • #7
Something else that occurred to me. You don't need CO2 24/7. You only need the CO2 while the algae is photosynthetically active - during the daylight hours.
 
  • #8
Our Bio reactor runs 24/7/365 requiring 100 CFM
 
  • #9
You are using artificial lighting? If so, then to what advantage given the low conversion efficiency? You will only produce a fraction of the energy that it took to grow the algae.
 
  • #10
Our lighting specifically focused on stages of algal development optimizes wave length productivity while reducing heat signature throughout the growth cycle optimizing ATP1 & ATP2 and a 70% reduction in energy requirement.
 
  • #12
Gunny said:
Our lighting specifically focused on stages of algal development optimizes wave length productivity while reducing heat signature throughout the growth cycle optimizing ATP1 & ATP2 and a 70% reduction in energy requirement.

Are you trying to be profitable or is this purely for research purposes?

Also, if you don't find the idea of using a diesel or IC engine as a CO2 source acceptable, could you explain why? It might help to provide context. Do you intend to make fuel e.g. biodiesel?
 

Related to Is there a portable CO2 generation system for off-grid use?

What is portable CO2 generation and how does it work?

Portable CO2 generation is the process of producing carbon dioxide (CO2) in a compact and easily transportable form. This is often achieved through chemical reactions that release CO2 gas, such as mixing baking soda and vinegar. The resulting CO2 gas can then be captured and used for various purposes such as carbonation or fire extinguishing.

What are the benefits of portable CO2 generation?

Portable CO2 generation offers a convenient and efficient way to produce carbon dioxide for various applications. It eliminates the need for large and expensive CO2 tanks, making it more cost-effective and space-saving. It also allows for on-demand production of CO2, reducing the risk of overstocking or running out of supply.

What are the common uses of portable CO2 generation?

Portable CO2 generation has a wide range of uses, including carbonating beverages, creating dry ice, and extinguishing fires. It is also used in the medical field for respiratory treatments and in the agriculture industry for plant growth. Additionally, portable CO2 generators are often used for special effects in theater productions and concerts.

Are there any safety concerns with portable CO2 generation?

While portable CO2 generation can be a safe and convenient method for producing carbon dioxide, there are some safety concerns to be aware of. The chemical reactions involved in generating CO2 can produce heat, so it's important to handle the equipment carefully and follow proper safety protocols. It's also important to ensure proper ventilation when using CO2 generators to prevent buildup of the gas.

What are the alternatives to portable CO2 generation?

There are several alternatives to portable CO2 generation, such as using traditional CO2 tanks or purchasing pre-made CO2 cartridges. However, these options may be more expensive and less convenient than portable CO2 generation. Another alternative is using a CO2 scrubber, which removes CO2 from the air, but this method is typically only used in industrial settings.

Similar threads

Replies
3
Views
1K
  • Electrical Engineering
Replies
24
Views
3K
  • Electrical Engineering
Replies
5
Views
2K
Replies
7
Views
2K
Replies
8
Views
917
Replies
13
Views
4K
Replies
3
Views
2K
  • DIY Projects
Replies
17
Views
3K
Replies
6
Views
1K
Replies
35
Views
5K
Back
Top