Infinite domain to finite plate by a change of variables

In summary, the solution to the steady state heat diffusion problem on an infinite y domain involves taking a sub and solving for the limit as d goes to infinity. This results in a solution with only sinh or cosh terms, with their own Fourier coefficients. The boundary conditions are determined by breaking up the solution into two parts, and the solution can be written in the form of a Fourier series. However, the boundary conditions may be better represented by writing the solution with separate coefficients for each term.
  • #1
Dustinsfl
2,281
5
Consider the following solution to the steady state heat diffusion problem on an infinite y domain.
\[
T(x, y) = \sum_{n = 1}^{\infty}c_n\exp\left(-\frac{\pi n}{\ell} y\right)
\sin\left(\frac{\pi n}{\ell}x\right)
\]
How does one obtain the results of finite plate by making the change of variables \(d - y\) for \(y\) and considering the linit as \(d\to\infty\)?

Making that sub we have \(\exp(-\lambda_nd)\exp(\lambda_ny)\). If we take the limit as d goes to inifinity, we get 0. Therefore, \(T(x,y) = 0\). This doesn't seem correct.
 
Physics news on Phys.org
  • #2
Consider \(\exp(d-y) = \sinh(d-y) + \cosh(d-y)\).

Then \(\exp\left(\frac{\pi n}{\ell}(d-y)\right) = \sinh\left(\frac{\pi n}{\ell}(d-y)\right) + \cosh\left(\frac{\pi n}{\ell}(d-y)\right)\).
\[
T(x,y) = \sum_{n = 1}^{\infty}c_n\sin\left(\frac{\pi n}{\ell}x\right)\left[\sinh\left(\frac{\pi n}{\ell}(d-y)\right) + \cosh\left(\frac{\pi n}{\ell}(d-y)\right)\right]
\]
General the solution to the Laplace on a rectangle will only have sinh or cosh, but if it has both, they should have their own Fourier coefficients. I don't see away to re-write this any further though. I still don't understand the \(d\to\infty\) part.

If we break \(T\) up, we have
\[
T_1 = T(x,y) = \sum_{n = 1}^{\infty}c_n\sin\left(\frac{\pi n}{\ell}x\right)\sinh\left(\frac{\pi n}{\ell}(d-y)\right)
\]
which implies a boundary condition of \(T(x, d) = f(x)\), and
\[
T_2 = T(x,y) = \sum_{n = 1}^{\infty}c_n\sin\left(\frac{\pi n}{\ell}x\right)\cosh\left(\frac{\pi n}{\ell}(d-y)\right)
\]
which implies a boundary condition of \(T'(x, d) = g(x)\).
Is there more to say about \(T\)?

If \(d\to\infty\), we are back to the infinite domain problem.
 
Last edited:
  • #3
dwsmith said:
\[
T(x,y) = \sum_{n = 1}^{\infty}c_n\sin\left(\frac{\pi n}{\ell}x\right)\left[\sinh\left(\frac{\pi n}{\ell}(d-y)\right) + \cosh\left(\frac{\pi n}{\ell}(d-y)\right)\right]
\]
Should this have be written automatically as
\[
T(x,y) = \sum_{n = 1}^{\infty}\sin\left(\frac{\pi n}{\ell}x\right)\left[A_n\sinh\left(\frac{\pi n}{\ell}(d-y)\right) + B_n\cosh\left(\frac{\pi n}{\ell}(d-y)\right)\right]
\]
instead?

This would then make more since for the boundary conditions. We would have the first equal to say \(f(x)\) and the second would be the derivative equal to \(g(x)\).
 
Last edited:

Related to Infinite domain to finite plate by a change of variables

1. What is meant by "infinite domain" and "finite plate" in this context?

In this context, "infinite domain" refers to a region or space that extends infinitely in all directions, while "finite plate" refers to a finite, bounded area within that infinite domain.

2. What is the purpose of using a change of variables in this scenario?

The purpose of a change of variables is to transform the infinite domain into a finite domain, making it easier to solve problems and analyze data within that finite region.

3. How does the change of variables affect the equations describing the system?

The change of variables alters the equations by introducing new variables and coefficients that are specific to the finite domain, allowing for a more accurate representation of the system within that region.

4. What are some common techniques for implementing a change of variables?

Some common techniques for implementing a change of variables include coordinate transformations, scaling, and rescaling of variables, as well as using special functions and transformations such as Fourier series or Laplace transforms.

5. Are there any limitations or challenges associated with using a change of variables in this scenario?

Yes, there can be limitations or challenges associated with using a change of variables, such as determining the appropriate transformation to use, ensuring the transformed equations accurately represent the system, and potential difficulties in solving the transformed equations. Additionally, the change of variables may introduce new boundary conditions or constraints that need to be carefully considered.

Similar threads

  • Differential Equations
Replies
1
Views
1K
  • Differential Equations
Replies
11
Views
2K
  • Differential Equations
Replies
2
Views
2K
  • Differential Equations
Replies
4
Views
1K
  • Differential Equations
Replies
3
Views
1K
  • Differential Equations
Replies
15
Views
2K
Replies
8
Views
2K
  • Differential Equations
Replies
16
Views
1K
  • Differential Equations
Replies
4
Views
2K
  • Differential Equations
Replies
7
Views
522
Back
Top