Impulse for 2 Degree of freedom system

In summary, you have to include the change of momentum of both balls in order to find the impulse exerted on the ball.
  • #1
supernova1387
31
0
I have a question which might be simple.

Suppose we have a 2 degree of freedom system such as a double pendulum which is suspended from the ceiling. Now if the second ball (the lower one) collides with the wall, how can we find the impulse exerted on the ball. I mean do we consider the change in linear momentum JUST for the second ball or do we have to find the center of mass of the system and find the velocity change for the center of mass of the system? Recall that principle of linear momentum states that:

mv1 + Ʃ∫ F*dt= mv2
and the impulse I=Ʃ∫ F*dt
:confused:
 
Last edited:
Physics news on Phys.org
  • #2
It's going to be a little complicated, because the constraint forces will transfer impulse between the two masses and between top mass and ceiling. So neither of these two will give you correct answer. The net impulse transferred by wall and ceiling is going to be the center of mass velocity change. But you can't say how much is each one responsible for without doing further analysis.
 
  • #3
Thank you for the reply. What if we assume the 2 mass system are connected together and to the wall by massless rigid links. In that case I think the impulsive forces between the members will be like internal forces and they will cancel each other. Can we say here that the net impulsive force is equal to the change in velocity of the second ball ( the lower one)? Or do we still have to consider the center of mass for the system?
 
  • #4
The force between the two masses cancels out if you consider CoM motion, of course. The reason I pointed out existence of that interaction is to make sure you don't think that the impulse transferred from the wall goes to the lower mass only. It is shared between the two masses, but so is the impulse from the ceiling. You still can't say anything without going to specific case. If you know angles of both pendulums, lengths of arms, and assume perfectly elastic collision, then you can solve for constraint forces and find out exactly how much momentum was transferred from the wall and the ceiling.
 
  • #5
supernova1387 said:
Can we say here that the net impulsive force is equal to the change in velocity of the second ball ( the lower one)? Or do we still have to consider the center of mass for the system?

Think about what happens if the rod connecting the two balls is horizontal when the collision occurs. The horizontal component of velocity of both balls is the same, before and after the impulse.

To get the impulsive force on the wall, you have to include the change of momentum of both balls.
 
  • #6
Thank you both for your answers.
 

Related to Impulse for 2 Degree of freedom system

1. What is impulse in a 2 degree of freedom system?

Impulse in a 2 degree of freedom system refers to the sudden application of force to the system, causing a change in its motion. It can be represented by a large and short-duration force acting on the system at a specific point in time.

2. How does the system respond to an impulse?

The response of the system to an impulse depends on its natural frequency and damping ratio. If the impulse is applied at the natural frequency, the system will experience resonance and the response will be magnified. If the impulse is applied at a different frequency, the response will be damped.

3. What is the difference between impulse and force?

Impulse is the product of force and time, while force is the push or pull that causes an object to accelerate. In a 2 degree of freedom system, an impulse is a sudden change in force over a short period of time, while a force can be applied gradually.

4. How is the impulse response of a 2 degree of freedom system calculated?

The impulse response of a 2 degree of freedom system can be calculated using the transfer function, which is the ratio of the output response to the input force. The inverse Laplace transform of the transfer function gives the impulse response.

5. What are the practical applications of studying impulse in 2 degree of freedom systems?

Understanding impulse in 2 degree of freedom systems is important in various fields such as mechanical and structural engineering, robotics, and aerospace engineering. It can help in predicting the behavior of structures and systems under sudden impacts or vibrations, and in designing systems with optimal damping to reduce the effects of impulse forces.

Similar threads

  • Mechanics
Replies
5
Views
1K
Replies
11
Views
2K
  • Introductory Physics Homework Help
Replies
11
Views
1K
Replies
0
Views
1K
Replies
3
Views
1K
  • Introductory Physics Homework Help
Replies
15
Views
1K
Replies
17
Views
981
  • Mechanics
Replies
30
Views
854
Replies
1
Views
6K
  • Mechanical Engineering
Replies
1
Views
739
Back
Top