How to get the centrifuge on LEO?

  • Thread starter Urvabara
  • Start date
  • Tags
    Centrifuge
In summary, to get the Mars space ship's centrifuge on LEO with Ares V, you would need at least three launches and the centrifuge would require several megawatts of energy to spin up to its target speed.
  • #1
Urvabara
99
0
How to get the Mars space ship's centrifuge (diameter: ~20 meters) on LEO with Ares V?

The radiation shield (liquid water) between centrifuge's hollow walls has mass of 160 metric tonns, so probably the centrifuge has to be shoot on LEO without the water. Ares V's payload is "only" 130 metric tons. Maybe it's possible to use only 130 metric tons of water so that one Ares V is enough for the radiation shield.

There should be 8 "bed rooms" with doors for 8 people, showers and toilets in the centrifuge, because the centrifuge is the place where the astronauts/cosmonauts will be almost whole the flight time.

But how many Ares V vehicles is needed for the centrifure (diameter: ~20 meters, width: ~4.5 meters, volume: ~1414 m[tex]^3[/tex])?

How much energy is needed to spin this centrigure 6 RPM? Is this centrifuge beyond our engineering capabilities?

Thanks!
 
Last edited:
Engineering news on Phys.org
  • #2
To get the centrifuge on to LEO with Ares V, you would need at least three launches. This is because the payload capacity of Ares V is 130 metric tons, and the centrifuge alone weighs 160 metric tons. You would need to launch the centrifuge in two launches, with the third launch carrying the radiation shield of liquid water between the centrifuge's hollow walls. The centrifuge would require a large amount of energy to spin up to 6 RPM. The exact amount of energy required would depend on the exact design of the centrifuge and the materials used. It is likely that the centrifuge would require several megawatts of energy to spin up to its target speed. This is well within the engineering capabilities of today, though it would certainly be a challenging project.
 

Related to How to get the centrifuge on LEO?

1. How does a centrifuge work?

A centrifuge is a machine that uses centrifugal force to separate particles of different densities. It works by spinning samples at high speeds, causing denser particles to move towards the outside while lighter particles stay closer to the center.

2. What is the purpose of a centrifuge on LEO?

A centrifuge on LEO (Low Earth Orbit) is used to simulate Earth's gravity for scientific research, such as studying the effects of microgravity on living organisms or conducting experiments in a controlled environment.

3. How is a centrifuge transported to LEO?

A centrifuge can be transported to LEO via a spacecraft, such as a rocket or space shuttle. It can also be assembled and installed on a space station, such as the International Space Station.

4. What are the challenges of operating a centrifuge on LEO?

One of the main challenges of operating a centrifuge on LEO is maintaining a stable and controlled environment, as the microgravity environment can affect the performance of the machine. Additionally, power and maintenance requirements must be carefully considered in the design and operation of a centrifuge on LEO.

5. Are there any future plans for centrifuges on LEO?

Yes, there are ongoing plans to develop and improve centrifuges on LEO for various research purposes. For example, NASA is currently working on a new centrifuge design that will allow for longer and more diverse experiments to be conducted in space.

Similar threads

Replies
6
Views
1K
  • Aerospace Engineering
Replies
3
Views
2K
  • Calculus and Beyond Homework Help
Replies
4
Views
1K
  • Astronomy and Astrophysics
Replies
1
Views
4K
  • MATLAB, Maple, Mathematica, LaTeX
Replies
4
Views
2K
  • MATLAB, Maple, Mathematica, LaTeX
Replies
5
Views
2K
  • MATLAB, Maple, Mathematica, LaTeX
Replies
5
Views
2K
  • MATLAB, Maple, Mathematica, LaTeX
Replies
1
Views
2K
Back
Top