How Is Energy Dissipated When Braking a Car?

In summary: As for the units, they should be on both sides of the equation to show that the units are consistent and to make sure no units are dropped in the calculation.In summary, the question is asking about the amount of energy dissipated in braking a 1200-kg car to a stop from an initial speed of 30 m/s. The formula used to calculate this is 1/2 mv(final)^2 - 1/2 mv(initial)^2, which results in 540000J. However, the correct answer should have a negative sign on the right side of the equation to represent the energy removed from the car. The units should also be included on both sides of the equation to ensure consistency and avoid any dropped units.
  • #1
physkid1
8
0
1. How much energy is dissipated in braking a 1200-kg car to a stop from an initial speed of 30 m/s?



2. 1/2 mv(final)^2 - 1/2 mv(initial)^2



3. 1/2 x 1200 x 0^2 - 1/2 x 1200 x 30^2 = 540000J

is this right ? cheers
 
Physics news on Phys.org
  • #2
physkid1 said:
1. How much energy is dissipated in braking a 1200-kg car to a stop from an initial speed of 30 m/s?



2. 1/2 mv(final)^2 - 1/2 mv(initial)^2



3. 1/2 x 1200 x 0^2 - 1/2 x 1200 x 30^2 = 540000J

is this right ? cheers

looks OK
 
  • #3
physkid1 said:
1/2 x 1200 x 0^2 - 1/2 x 1200 x 30^2 = 540000J
Shouldn't the right hand side be -540000 ?
And where did the J come from? If you don't have units in the left side of the equation, why did you put units on the right side?
 
  • #4
omoplata said:
Shouldn't the right hand side be -540000 ?
And where did the J come from? If you don't have units in the left side of the equation, why did you put units on the right side?

Energy is a scalar, so is never negative [nor positive, nor up nor down nor North or any other direction] it is just a value.

The unit of energy is Joule, so a J is probably very appropriate.
 
  • #5
PeterO said:
Energy is a scalar, so is never negative [nor positive, nor up nor down nor North or any other direction] it is just a value.
Scalars can be negative.

Example 1: If the potential energy due to a point mass infinity at an infinite distance is assumed to be zero, then the potential energy at a finite distance from the mass is negative.
Example 2: If the increase of kinetic energy in the car in this problem is negative, that means the energy has decreased. i.e. the car has lost energy.

Also refer to https://www.physicsforums.com/showthread.php?t=270612" thread.

PeterO said:
The unit of energy is Joule, so a J is probably very appropriate.

The equation can be written down so the units on the left hand side and right hand side are equal, which the OP has not done. Also, the OP ignores the sign of the answer. So, technically, it is not an "equation" at all.

Getting into the habit of writing down correct equations to begin with can help students a lot, in avoiding common errors that happen because of misinterpretation of units etc.
 
Last edited by a moderator:
  • #6
omoplata said:
Scalars can be negative.

Example 1: If the potential energy due to a point mass infinity at an infinite distance is assumed to be zero, then the potential energy at a finite distance from the mass is negative.
Example 2: If the increase of kinetic energy in the car in this problem is negative, that means the energy has decreased. i.e. the car has lost energy.

Also refer to https://www.physicsforums.com/showthread.php?t=270612" thread.



The equation can be written down so the units on the left hand side and right hand side are equal, which the OP has not done. Also, the OP ignores the sign of the answer. So, technically, it is not an "equation" at all.

Getting into the habit of writing down correct equations to begin with can help students a lot, in avoiding common errors that happen because of misinterpretation of units etc.

OK try this:
By how much does the Gravitational Potential Energy of a 10 kg mass change for a trip between ground level and the top of a 12 m building?
 
Last edited by a moderator:
  • #7
PeterO said:
OK try this:
By how much does the Gravitational Potential Energy of a 10 kg mass change for a trip between ground level and the top of a 12 m building?
The potential energy change is approximately 10 kg * 9.81 m/s^2 * 12m.

What's your point?
 
  • #8
omoplata said:
The potential energy change is approximately 10 kg * 9.81 m/s^2 * 12m.

What's your point?

I was interested to see if you fill a calculation up with units as you go - you apparently do; never seen anyone else do that - and I was also interested to see if you would first want to know whether the mass was going from the ground to the building, or the building to the ground - which didn't worry you.
 
  • #9
PeterO said:
I was interested to see if you fill a calculation up with units as you go - you apparently do; never seen anyone else do that - and I was also interested to see if you would first want to know whether the mass was going from the ground to the building, or the building to the ground - which didn't worry you.

I sometimes don't use units either. But I always have the left and right sides of an equation balanced, and that includes the units.

Because the question didn't state whether it was going up or down, I simply assumed that they are asking for the numerical value of the energy change.
 
  • #10
omoplata said:
Shouldn't the right hand side be -540000 ?
And where did the J come from? If you don't have units in the left side of the equation, why did you put units on the right side?
Very simple - yes, by the calculation there should be a negative sign on the other side of the equation. However, that is the energy removed from the car. Thus, the energy dissipated by the brakes is the positive value of that.
 

Related to How Is Energy Dissipated When Braking a Car?

1. What is kinetic energy?

Kinetic energy is the energy an object possesses due to its motion.

2. How is kinetic energy calculated?

Kinetic energy is calculated using the equation KE = 1/2 * m * v^2, where m is the mass of the object and v is its velocity.

3. What are some examples of kinetic energy?

Some examples of kinetic energy include a moving car, a bouncing ball, and a swinging pendulum.

4. Can kinetic energy be converted into other forms of energy?

Yes, kinetic energy can be converted into other forms of energy, such as potential energy, thermal energy, and sound energy.

5. How does kinetic energy affect an object's motion?

Kinetic energy is directly proportional to an object's mass and the square of its velocity. This means that as an object's mass or velocity increases, its kinetic energy also increases, which can affect its motion by making it harder to stop or change direction.

Similar threads

  • Introductory Physics Homework Help
Replies
5
Views
912
  • Introductory Physics Homework Help
Replies
3
Views
306
  • Introductory Physics Homework Help
Replies
8
Views
256
  • Introductory Physics Homework Help
Replies
1
Views
769
  • Introductory Physics Homework Help
Replies
6
Views
386
  • Introductory Physics Homework Help
Replies
3
Views
879
  • Introductory Physics Homework Help
Replies
18
Views
2K
  • Introductory Physics Homework Help
Replies
12
Views
2K
  • Introductory Physics Homework Help
Replies
4
Views
537
  • Introductory Physics Homework Help
2
Replies
55
Views
2K
Back
Top