How could we produce a secondary beam of long neutral kaon

In summary, producing a secondary beam consisting of long neutral kaons using PS or SPS can be achieved by removing charged objects and waiting for them to decay. However, this also means that neutrons will be present in the beam. To reduce the neutrons, one must also reduce the number of usable long neutral kaons. One proposed method is to use proton-proton collisions below 6.5 GeV beam energy. Another challenge in conducting such experiments is the presence of neutrons in the initial state and their interaction with the detector. Some solutions to this issue include using hydrogen gas as a windowless target and employing tight timing cuts. However, these methods may also limit the intensity of the kaon beam. Additionally, techniques such as jet
  • #1
aveline de grandpre
10
1
how could we produce a secondary beam consisted of long neutral koans using PS or SPS ? I mean is there any example of such an experiment? what are the conditions for conducting this such as the type of the primary beam, the type of the target and the momentum of the
beam? I am interested to conduct an experiment on long neutral kaons decay in a fixed target experiment.
 
Physics news on Phys.org
  • #2
The kaon CP violation experiments used those beams. You will always have neutrons in it as well, but if you are fine with that just remove the charged objects and "wait" (distance) until everything short-living decayed.
 
  • Like
Likes aveline de grandpre
  • #3
http://www.etap.physik.uni-mainz.de/267_ENG_HTML.php
 
  • #4
mfb said:
. You will always have neutrons in it as well, but if you are fine with that just remove the charged objects and "wait"

And if you're not fine with that, that's kind of what you have to do anyway. Pretty much anything you do to reduce the neutrons also reduces the usable K0longs.

aveline de grandpre said:
Im interested to conduct an experiment on long neutral kaons decay in a fixed target experiment.

Why CERN and not JPARC? Also, proposing an experiment is a pretty big deal. The PAC will look closely at your team and ask "can they do what the propose"?
 
  • #5
Vanadium 50 said:
And if you're not fine with that, that's kind of what you have to do anyway. Pretty much anything you do to reduce the neutrons also reduces the usable K0longs.
Proton-proton collisions below 6.5 GeV beam energy could work. No neutrons in the initial state, not enough energy to produce them as baryon pair, and the weak interaction is negligible.

KL beams are probably something the CERN beamline for schools projects could use.
 
  • Like
Likes aveline de grandpre
  • #6
mfb said:
No neutrons in the initial state

Doesn't work. To get a K0 you need the reaction p + p --> p + Lambda + K0 + pi+; I need the Lambda to conserve baryon number. The Lambda can decay to n + pi. If I want to get rid of the Lambda by having two K mesons produced, e.g. p + p --> p + p + K0 + K0, that takes more energy, and p + p --> p + Lambda + K0 + pi+ will still go. But worse than this, you can have neutrons from reactions without kaons: p + p --> p + n + pi+, for example.

Furthermore, in a fixed target geometry, you need to build at least part of your target out of something other than hydrogen. So you can get neutrons by elastic scattering and spallation.
 
  • #7
Ah right, the protons can become neutrons without the weak interaction.

Hydrogen gas as windowless target would be possible. I don't say it is good, but at least not impossible.

Anyway, neutrons live so long that their decays should be negligible in most cases.
 
  • #8
The problem is not the neutron decay. It's that the neutron interacts with your detector.

Consider a very interesting and very difficult decay, like KL --> pi0 nu nubar. That has a SM branching fraction that's very, very tiny: like 10-12. If you want to see the decay - which looks like two photons plus nothing - you need to beat down the background to well under one per trillion kaons. While it's hard for a neutron to fake a photon (or two to fake two), it's not one-in-a-trillion times hard. More like one in few a thousand. So the name of the game is to get the neutrons out of your sample.

This is hard. The least hard thing to do is to take advantage of the fact that neutrons tend to arrive late and interact more slowly, so you place tight timing cuts on the interaction. This works best when you kaons arrive in a small window and most of the beam spill is empty. But a mostly empty beam spill doesn't give you that many kaons. That's why i said there's this tension between beam purity and beam intensity.

KLOE gets a very pure sample by using e+e- annihilation to the phi(1020). The price they paid is that the number of events is measured in millions, so they don't see these ultra-rare decays.
 
  • #9
ATLAS and CMS achieve a jet suppression of several thousands in their photon identification - and most of the remaining events are actually neutral pions decaying to two photons. I would expect a pion photon pair / neutron separation to be easier, and the detectors searching for rare kaon decays have a much cleaner environment.

The neutrons fly along the beam axis, the photons do not.

The pion leads to two photons close together in time.

Sure, you have to care about neutrons, but you can filter them out with much more than just the calorimeter response.
 
  • #10
A great deal of the jet suppression comes from the lack of tracks. Purely calorimetrically you don't get as much. And unfortunately with neutrons, anything they can do, they will. Such as interact with residual gas and make a pizero. Now you have a perfectly good pizero that was not from your intended signal.

I'm looking at the KOTO proposal, and they get about 42 neutrons per Klong, and about 8 of them have energy above 1 GeV. It's a good document if you are interested in the troubles neutrons cause.
 

Related to How could we produce a secondary beam of long neutral kaon

1. How do we produce a secondary beam of long neutral kaon?

The most common method for producing a secondary beam of long neutral kaon is through the use of a particle accelerator. This involves accelerating protons or other particles to high energies and colliding them with a target material, resulting in the production of kaons. The kaons can then be separated from the other particles and focused into a secondary beam.

2. What is the purpose of producing a secondary beam of long neutral kaon?

The main purpose of producing a secondary beam of long neutral kaon is for research purposes. Kaons are unstable particles and studying their properties can provide valuable insights into the fundamental laws of physics. Additionally, kaons are used in medical imaging and cancer treatment, so producing a secondary beam can also have practical applications.

3. Are there any challenges in producing a secondary beam of long neutral kaon?

Yes, there are several challenges in producing a secondary beam of long neutral kaon. One major challenge is the low production rate of kaons compared to other particles in a particle accelerator, so specialized techniques must be used to isolate and focus the kaons into a beam. Another challenge is the short lifetime of kaons, requiring them to be produced and transported quickly before they decay.

4. What factors affect the production of a secondary beam of long neutral kaon?

There are several factors that can affect the production of a secondary beam of long neutral kaon. These include the energy and type of particles used in the accelerator, the type and density of the target material, and the design and efficiency of the kaon separation and focusing systems. Additionally, external factors such as magnetic fields and radiation can also impact the production of the beam.

5. How can we optimize the production of a secondary beam of long neutral kaon?

To optimize the production of a secondary beam of long neutral kaon, careful selection and control of the accelerator parameters, target material, and kaon separation and focusing systems is necessary. Additionally, ongoing research and development in accelerator technology and techniques can lead to improvements in the production rate and efficiency of kaon beams. Collaborations between scientists and engineers from different fields can also help to optimize the production of kaon beams for various applications.

Similar threads

  • High Energy, Nuclear, Particle Physics
Replies
1
Views
881
  • High Energy, Nuclear, Particle Physics
Replies
5
Views
2K
  • High Energy, Nuclear, Particle Physics
Replies
4
Views
2K
  • High Energy, Nuclear, Particle Physics
Replies
4
Views
2K
  • Quantum Interpretations and Foundations
Replies
15
Views
409
Replies
11
Views
1K
  • Special and General Relativity
2
Replies
39
Views
6K
  • Beyond the Standard Models
2
Replies
39
Views
5K
  • Quantum Physics
Replies
4
Views
764
Replies
9
Views
863
Back
Top