Find Airspeed for Min Horsepower w/ 1800 lb Clark Y Wing

In summary, the conversation discusses the calculation of the minimum airspeed for a monoplane with a Clark Y wing, 36-feet by 6-feet, and a 3.8 sq ft. equivalent flat plate area, with a total weight of 1800 lbs after fuel consumption. The relevant equation used is W = Max. Coefficient of Lift × (density at sea level/2) × wing area × (Minimum Airspeed)^2, with the maximum coefficient of lift for a Clark Y wing being 1.56. However, it is more likely that the speed corresponding to the lowest drag for the required lift (equal to the weight of the aircraft) is needed, which could be affected by factors such as
  • #1
ChimM
17
0

Homework Statement


For monoplane of Clark Y wing, 36-feet by 6-feet, with 3.8 sq ft. equivalent flat plate area, what should be the airspeed for minimum Horsepower when fuel has been burned so that the total weight is 1800 lb?

Homework Equations


Wing Area = 36 x 6 = 216
Weight = Lift
Weight = Max. Coefficient of lift × (density at sea level/2) × wing area × (Minimum Airspeed)^2

○ Gasoline consumption
HPreq/V = W/375 × (((Coefficient of Drag) + (1.28Ae/ wing area))/Coeffcient of Lift)

The Attempt at a Solution


Given:
Clark Y wing
Wing span = 36; wing chord = 6
Wing area = 216
Ae = 3.8 sq. ft
W = 1800 lbs

Reqd: Airspeed

Solution:
From the formula
W = Max. Coefficient of Lift × (density at sslc/2) × (Wing area) × (Minimum Airspeed)^2

Since, the problem stated that the wing is Clark Wing, Max. Coefficient of Lift of the airfoil selection is 1.56.

By substituting the given data,

Minimum Airspeed = 67.03 ft/s

My question is, does my answer correct? What is the relevant of the equivalent flat plate area on the problem?

Thank you..
 
Physics news on Phys.org
  • #2
Thanks for the post! Sorry you aren't generating responses at the moment. Do you have any further information, come to any new conclusions or is it possible to reword the post?
 
  • #3
ChimM said:
3.8 sq ft. equivalent flat plate area ... What is the relevant of the equivalent flat plate area on the problem?
I assume that is how you're supposed to calculate the coefficient of drag. Not sure if that includes the drag related to the fuselage.

ChimM said:
Clark Wing ... Max. Coefficient of Lift of the airfoil selection is 1.56.
Max coefficient of lift occurs at a specific angle of attack, and the angle of attack required for a specific amount of lift decreases as the aircraft speed increases. It's more likely that what you're looking for is the speed that corresponds to the lowest amount of drag for the amount of lift required which equals the weight of the aircraft. Using a Cessna 172/182 as an example, looks like the longest range speed is around 65 to 70 knots, which is slower than the best glide ratio speed which is closer to 80 knots. Since longest range is affected by engine and propeller efficiency, I don't know if it is the same as the speed of lowest power output (thrust (equals drag) times air speed). Also the stated speed of 65 to 70 knots was posted by another person as opposed to the article that mentioned best glide ratio speed was around 80 knots.
 
Last edited:

Related to Find Airspeed for Min Horsepower w/ 1800 lb Clark Y Wing

1. How do you calculate airspeed for minimum horsepower with a 1800 lb Clark Y wing?

The airspeed for minimum horsepower with a 1800 lb Clark Y wing can be calculated using the following formula:

Airspeed = √(2 * horsepower / (density * wing area * drag coefficient))

2. What is a Clark Y wing?

A Clark Y wing is an airfoil shape commonly used in aircraft design. It is characterized by a flat lower surface and a curved upper surface, which helps generate lift and reduce drag.

3. How does wing area affect airspeed for minimum horsepower?

Wing area is a key factor in determining airspeed for minimum horsepower. A larger wing area will require a lower airspeed to generate the necessary lift, resulting in lower horsepower requirements.

4. What is the drag coefficient of a Clark Y wing?

The drag coefficient of a Clark Y wing can vary depending on the specific design and conditions, but it is typically between 0.03 and 0.06.

5. Why is finding airspeed for minimum horsepower important?

Finding airspeed for minimum horsepower is important for optimizing aircraft performance and efficiency. It allows for the most efficient use of engine power and can result in cost savings for fuel and maintenance.

Back
Top