Egg Drop Challenges: Ensuring Safe Delivery of 3 Grade A Eggs

In summary, the egg drop rules state that the container must be less than 1600 cm cubed in volume, with no dimension greater than 25 cm and a maximum mass of 1 kg. Parachutes are not allowed and the device must remain in one piece. The eggs must be easily removable from 2.5 meters and all three must survive. The suggested idea is to create a conical device with cushion foam surrounding the eggs, but testing showed that all the eggs broke upon impact. Further details are needed to determine the cause of the breakage. Another suggestion is to place the eggs in small boxes with padding and then secure them in a larger cardboard box with rubber bands and additional padding. Fins can also be added
  • #1
Mark L
1
0
The egg drop rules are that the container must be less than 1600 cm cubed in volume, wiht no dimension greater than 25 cm and a maximum mass of 1 kg. The eggs must be able to be easily removed after the drop from 2.5 meters. Parachutes may not be used and the device must be in one piece. Three large grade A eggs will have to all survive.
My idea was to make a conical device and surround the eggs in cushion foam, but all of my eggs broke upon impact in testing. Should i elaborate on my idea or is there a better way to get the three eggs down safely.
Thank you for any and all suggestions.
 
Physics news on Phys.org
  • #2
Are your eggs hard-boiled?
 
  • #3
It might help to at least try to determine why the eggs broke.

Did the cone drop onto its tip? Did it flip over?

Did it bounce? How much deformation took place?

What were the dimensions of the device? How much space separated the eggs? How much separated the edges of the cone from the egg?

We need more information.
 
  • #4
Place the eggs in 3 small boxes that are just big enough, and put something like balled tissue paper in there. Then, get the largest box you can use (ideally made of cardboard because it's light and will deform on impact a bit softening the blow) and hook the little boxes into the big one using rubber bands as supports. 6 for each box. (use staples or something similar) Then put some soft pliable padding in the big box... your done!

To take the eggs out all you have to do is take them out of their boxes.

Something like this picture...

(light blue is mild padding, and dark blue is somewhat stiffer padding)

Also, you could get the box to fall so that the eggs will absorb the impact in their strongest direction by adding fins!
(You could even take this a step further by ensuring the box will land one way, and then setting the eggs up to withstand that specific direction)

Naturally the idea here is the increase the amount of time that it takes to impart the force of the fall onto the eggs.
 

Attachments

  • eggz.bmp
    216.6 KB · Views: 654
  • #5
Ah but you've gone and given him the answer... or at least one route.
 

Related to Egg Drop Challenges: Ensuring Safe Delivery of 3 Grade A Eggs

1. What is an Egg Drop Challenge?

An Egg Drop Challenge is a popular science experiment where participants design and create a contraption that can protect a raw egg from breaking when dropped from a certain height. The challenge is to successfully deliver the egg without any damage.

2. Why is it important to use Grade A eggs for the challenge?

Grade A eggs are important for the challenge because they have a thicker and more durable shell compared to other grades. This makes them more resistant to breaking and more likely to survive the drop.

3. What materials are commonly used for an Egg Drop Challenge?

The most commonly used materials for an Egg Drop Challenge are straws, popsicle sticks, rubber bands, balloons, and other lightweight and flexible materials. Participants can also use more advanced materials such as foam, bubble wrap, or even parachutes.

4. How can I ensure the safety of my egg during the drop?

To ensure the safety of your egg during the drop, it is important to have a sturdy and well-designed contraption. Make sure to use enough padding and cushioning materials to absorb the impact of the drop. It is also helpful to test your contraption at different heights to see how it performs.

5. Are there any tips for designing a successful contraption?

Some tips for designing a successful contraption include making it lightweight, using a parachute or a slow descent mechanism, and ensuring that the egg is securely placed and does not move inside the contraption. It is also helpful to incorporate multiple layers of protection and to test the contraption before the final drop.

Similar threads

Replies
11
Views
7K
Replies
12
Views
8K
  • Other Physics Topics
Replies
4
Views
7K
  • Other Physics Topics
Replies
16
Views
30K
  • Introductory Physics Homework Help
Replies
5
Views
3K
  • Introductory Physics Homework Help
Replies
2
Views
2K
  • Introductory Physics Homework Help
Replies
2
Views
3K
Replies
1
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
2K
  • Other Physics Topics
Replies
7
Views
6K
Back
Top