E&M energy density near a radiating hi Q half-wave antenna.

In summary, the E&M energy density near a radiating hi Q half-wave antenna is the combination of electric and magnetic fields surrounding the antenna. It is calculated by squaring the electric and magnetic field strengths and dividing by the characteristic impedance of the medium. A hi Q half-wave antenna has a high quality factor, resulting in a stronger and more focused signal. The energy density near the antenna can affect its performance by impacting its range and communication capabilities. This can be influenced by factors such as the antenna's design, frequency, environment, and obstructions in its path.
  • #1
Spinnor
Gold Member
2,221
430
A high Q antenna basically means the antenna stores a large amount of energy in the near fields compared with the electromagnetic energy radiated per cycle?

When the alternating current momentarily stops in our half-wave antenna charge density is maximum at the ends of the antenna, and the electrostatic energy density is maximum near the poles of the antenna?

A quarter cycle latter the current density peaks and is maximum at the mid point of the antenna, and therefore magnetic energy density is momentarily maximum near the center of the antenna?

Is there then a cyclic flow of energy from the polar regions to the mid-section of our antenna and then back again (ignore the outward radial flow of energy which for a high Q antenna will be minor compared with near field energy density)?

Are there any good Apps that show this cyclic flow of energy? I did find a great set of physics apps, one in particular that shows the energy density near the antenna but the results don't seem to fit my naive guess.

Screen shots below show the energy density near the antenna. The app is at,

http://www.falstad.com/emwave1/

which is from a large list of physics apps,

http://www.falstad.com/mathphysics.html

Thanks for any help!

Edit, the following crude picture of energy flow is more in line with my thoughts,

http://www.google.com/imgres?start=...0CCkQhBwwDDhk&iact=rc&dur=1778&page=6&ndsp=22
 

Attachments

  • min density.jpg
    min density.jpg
    26.2 KB · Views: 428
  • max density.jpg
    max density.jpg
    26.5 KB · Views: 412
Last edited:
Physics news on Phys.org
  • #2

Thank you for your post. Your understanding of a high Q antenna is generally correct. A high Q antenna is one that has a high quality factor, meaning it is able to store a large amount of energy in its near fields compared to the energy that is radiated per cycle. This is due to the antenna's ability to maintain a strong resonance at a specific frequency.

In terms of the alternating current flow, you are correct that there is a cyclic flow of energy from the polar regions to the mid-section of the antenna and back again. This is due to the antenna's ability to oscillate at its resonant frequency, causing the electric and magnetic fields to alternate between the ends and center of the antenna.

As for apps that can show this cyclic flow of energy, I would recommend looking for simulations or animations of antennas in action. There are many resources available online that can demonstrate the behavior of antennas, such as the app you mentioned or other physics simulation programs. Additionally, you may also find helpful resources through scientific journals or textbooks on antennas and electromagnetics.

I hope this helps clarify your understanding of high Q antennas. Keep exploring and learning about this fascinating topic!
 

Related to E&M energy density near a radiating hi Q half-wave antenna.

What is E&M energy density near a radiating hi Q half-wave antenna?

The E&M energy density near a radiating hi Q half-wave antenna refers to the amount of electromagnetic energy present in the space surrounding the antenna. This energy is a combination of electric and magnetic fields that are generated by the antenna's radiation.

How is the energy density calculated?

The energy density is calculated by taking the square of the electric field strength and adding it to the square of the magnetic field strength. This value is then divided by the characteristic impedance of the medium in which the antenna is radiating. The result is a measure of energy per unit volume.

What is the significance of a hi Q half-wave antenna?

A hi Q half-wave antenna is a type of antenna that is designed to have a high quality factor (Q factor). This means that it can efficiently radiate energy without significant losses, resulting in a stronger and more focused signal. The energy density near such an antenna is typically higher compared to other types of antennas.

How does the energy density near a hi Q half-wave antenna affect its performance?

The higher the energy density near the antenna, the stronger and more focused the signal will be. This can result in a longer range and better communication capabilities. However, if the energy density becomes too high, it can cause interference with other nearby devices or systems.

What factors can affect the energy density near a radiating hi Q half-wave antenna?

The energy density near an antenna can be affected by several factors, including the antenna's design, the frequency at which it operates, the surrounding environment, and the characteristics of the medium in which it is radiating. Additionally, any obstructions or interference in the antenna's path can also impact the energy density near it.

Back
Top