Dropping a magnet through the moon

In summary, if a tunnel was built through the center of the moon and lined with copper wire, dropping a massive magnet through it would produce a current due to the magnetic field passing through the wire. However, if the coil ends were open-circuited, the magnet would keep oscillating between the surfaces of the moon. If the coil ends were connected to a load resistance, the back-emf would cause the magnet to eventually become stationary in the middle of the coil, extracting energy from the initial gravitational potential energy. This concept is commonly demonstrated in physics using a copper pipe and magnet.
  • #1
Ghostcrown
10
0
Let's say we built a tunnel through the (arbitrary) center of the moon, and lined the surfaces of the walls with millions of loops of copper wire. If we dropped a massive magnet in through the moon, would it produce a substantial amount of current due to the magnetic field passing through the wire, and keep going back and forth due to gravity? And would it be worth it?
 
Physics news on Phys.org
  • #2
Ghostcrown said:
Let's say we built a tunnel through the (arbitrary) center of the moon, and lined the surfaces of the walls with millions of loops of copper wire. If we dropped a massive magnet in through the moon, would it produce a substantial amount of current due to the magnetic field passing through the wire, and keep going back and forth due to gravity? And would it be worth it?

If the coil ends were open-circuited, then there would be no losses and the magnet would keep oscillating between the surfaces of the moon.

If the coil ends were connected to some load resistance (like a generator), then the back-emf would slow down the passage of the magnet on each oscillation on each pass, with the end result of the magnet stationary in the middle of the coil at the center of the moon, and you have extracted an amount of energy from the coil corresponding to the initial Gravitational Potential Energy of the magnet when released at the surface of the moon (minus inefficiencies).

Makes sense?
 
  • #3
You might produce a current, but the magnet will not come out to the same distance again. It will simply get stuck in the middle relatively fast.
 

Related to Dropping a magnet through the moon

1. Can a magnet actually be dropped through the moon?

No, a magnet cannot be dropped through the moon as it is a solid object with a dense core made up of iron and nickel. Magnets are also not strong enough to penetrate through solid objects.

2. What would happen if a magnet was dropped on the moon's surface?

If a magnet was dropped on the moon's surface, it would not stick or attract to anything as the moon does not have a magnetic field. The magnet would simply fall to the ground and remain there.

3. Would the magnet's strength change as it falls through the moon?

No, the magnet's strength would not change as it falls through the moon. The magnetic field of a magnet is a property that remains constant and does not change based on its location or movement.

4. Could a magnet affect the moon's gravitational pull?

No, a magnet does not have enough mass or force to affect the moon's gravitational pull. The moon's gravitational pull is determined by its own mass and the distance from other objects, not by the presence of a magnet.

5. What would happen if a magnet was dropped into one of the moon's craters?

If a magnet was dropped into one of the moon's craters, it would likely stay there or potentially roll down the slope of the crater. It would not have any significant impact or cause any changes to the moon's surface or environment.

Similar threads

  • Electromagnetism
Replies
5
Views
2K
Replies
3
Views
5K
Replies
1
Views
827
Replies
4
Views
389
  • Electromagnetism
Replies
4
Views
9K
  • Electromagnetism
2
Replies
36
Views
3K
Replies
10
Views
3K
  • Electromagnetism
Replies
2
Views
1K
Replies
10
Views
2K
  • Electromagnetism
2
Replies
47
Views
11K
Back
Top