Determine the weight of a titanium sphere

In summary, the weight of a volleyball-sized sphere made of pure titanium is approximately 46.070 pounds. However, the effectiveness of this sphere as a projectile may not be as great as expected due to its shape and material properties, as well as the conservation of momentum. Further research and experimentation is needed to determine its potential destructive capabilities.
  • #1
Ari Balt
2
0
I need help determining the weight, in pounds, of a volleyball-sized sphere comprised of pure titanium.
I can provide the following facts necessary for the equation:

Assume the circumference of the sphere is 65 centimeters.
Assume the sphere is solid, not hollow.
Titanium has an atomic mass of 47.876 and a density of 4.506 grams.

Any help on this would be appreciated.

NOTE: This is not for homework. If you must know, it is necessary to determine if someone is capable of creating the sphere in question in a fantasy setting role-playing game.
 
Physics news on Phys.org
  • #2
Circumference of a sphere is given by:

[tex]d_c=2\pi R[/tex]

find R and substitute to the equation for the volume of a sphere

[tex]V=\frac{4}{3}\pi R^3[/tex]

and multiply by the density to get mass.

Lastly, covert from pounds to kilograms. 1pound =~0.45 kilograms.
 
  • #3
Using those formulas, my answer came out to be 46.070 pounds, rounded to the nearest thousandths place assuming I found the correct answer.

For the sake of pretense, let's say a supervillain can expel this 46-lb. titanium sphere at Mach 3, or 1 kilometer per second. He directs this expulsion at a concrete wall from a distance of 300 feet, standing directly perpendicular to the wall. Upon impact, does the sphere penetrate the wall, bounce off, or disintegrate?

Let's assume the concrete wall is 12 inches thick with a hollow area behind it. (It's a bunker, if that matters.)
 
  • #4
Now that's a question that can't be answered with simple calculations.

Experiments in materials science, like these:
http://www.sciencedirect.com/science/article/pii/S0734743X02001082
http://www.sciencedirect.com/science/article/pii/S0734743X98000086
(paywalled, but you can read the graphs if you strain your eyes a little)

using 20 and 30 mm diametre steel rods, show penetration of concrete slabs up to 2 metre thick, at speeds close to 1km/s.
Larger projectiles show better penetration.

The projectiles are shown post-test without any noticeable deformation.

The shape of a sphere is less suited for penetration, as it's got a higher cross-section(impact area) to weight ratio than a long cone-tipped rod. Additionally, steel is better suited for the purposes, due to its higher density.
(Titanium is always talked about as being superior to steel in popular media, but that's just considering the aplications that require weight-saving while retaining similar mechanical properties, like with submarines. Your super villain would be more destructive if he could make steel spheres. Or better yet, tungsten of uranium - the denser the better.)

The two articles linked were one of the first that popped up when I googled concrete penetration with projectiles, so it's conceivable that you should be able to find something more definitive with more effort.

You might get somebody in the engineering/materials science section to help you find what you need.Also, consider that an 80kg man shooting a 20kg projectile at 1km/s will be thrown back at 250 m/s due to the conservation of momentum(aka recoil). This might be a very short-lived career of villainy for this guy.
 
Last edited:
  • #5
This is a total guess, but at Mach 3 I'd expect it to punch a hole straight through 12 inches of concrete.
 

Related to Determine the weight of a titanium sphere

1. How can the weight of a titanium sphere be determined?

The weight of a titanium sphere can be determined by using the formula: weight = density x volume. The density of titanium is 4.506 g/cm3 and the volume of a sphere is (4/3)πr3, where r is the radius of the sphere. Plug in the values and solve for weight.

2. What is the density of titanium?

The density of titanium is 4.506 g/cm3. This value can vary slightly depending on the purity and structure of the titanium.

3. Can the weight of a titanium sphere be measured using a scale?

Yes, the weight of a titanium sphere can be measured using a scale. However, it is important to make sure that the scale is calibrated and can accurately measure small weights, as titanium is a lightweight metal.

4. How does the weight of a titanium sphere compare to other materials?

The weight of a titanium sphere is relatively light compared to other materials. It has a density of 4.506 g/cm3, which is about half the density of steel (7.87 g/cm3) and only slightly denser than aluminum (2.70 g/cm3).

5. Can the weight of a titanium sphere change over time?

No, the weight of a titanium sphere should not change over time. Titanium is a very stable metal and is not susceptible to rust or corrosion, which could potentially alter its weight. However, if the sphere is exposed to extreme temperatures or physical damage, it may experience slight changes in weight.

Similar threads

  • Introductory Physics Homework Help
Replies
1
Views
4K
  • Introductory Physics Homework Help
Replies
14
Views
3K
  • Introductory Physics Homework Help
Replies
10
Views
3K
  • Mechanics
Replies
17
Views
7K
Replies
4
Views
3K
  • Programming and Computer Science
Replies
14
Views
3K
  • Astronomy and Astrophysics
Replies
4
Views
4K
  • Special and General Relativity
8
Replies
264
Views
28K
  • Materials and Chemical Engineering
Replies
2
Views
6K
Back
Top