Deformation of containers in the Tianjin explosion

In summary, the containers in the image appear to have been crushed or deformed by the force of the explosions, but it would likely take a much greater amount of energy to do this than was used in the Tianjin explosion.
Engineering news on Phys.org
  • #2
Anders Bruun said:
The containers in the image seem to have been crushed/deformed - but how much energy would be needed to do this?

They look more melted from the heat of the fires than crushed by the explosions...
 
  • #3
berkeman said:
melted from the heat of the f
Very little burnt paint.
 
  • #4
The shock wave from a large explosion applies an overpressure of hundreds of pounds per square inch as it passes by. That pressure makes for an enormous force when multiplied by the surface area of a shipping container - they'd be squashed flat as a penny on a railroad track if the force were applied for more than the few milliseconds it takes the shock wave to pass by.

Calculating blast effects accurately is difficult, but Google will find some useful models that will give numbers in the right order of magnitude.
 
  • #6
Nugatory said:
The shock wave from a large explosion applies an overpressure of hundreds of pounds per square inch as it passes by. That pressure makes for an enormous force when multiplied by the surface area of a shipping container - they'd be squashed flat as a penny on a railroad track if the force were applied for more than the few milliseconds it takes the shock wave to pass by.

Calculating blast effects accurately is difficult, but Google will find some useful models that will give numbers in the right order of magnitude.
I don't know about "hundreds of pounds per square inch" of blast over pressure from a shock wave, at least not after it has propagated some distance from the explosion.

According to this:

https://en.wikipedia.org/wiki/Overpressure

and

http://www.cdc.gov/niosh/docket/archive/pdfs/NIOSH-125/125-ExplosionsandRefugeChambers.pdf

a much more modest over pressure of only 10 psi can blow off limbs and will severely damage, if not demolish, reinforced concrete structures.
 
  • #7
Maybe it would be possible to use the size of the crater to estimate it?

The crater from:

West Fertilizer Company explosion - Wikipedia, the free ...

was around 30 meters in diameter. The one from Tianjin is around 100 - 110 meters in diameter.

From what I understand the energy needed increases by r^5, so maybe that could be used ?
 

Related to Deformation of containers in the Tianjin explosion

1. What caused the deformation of containers in the Tianjin explosion?

The deformation of containers in the Tianjin explosion was caused by the intense heat and pressure generated by the explosion. This caused the metal containers to expand and deform, ultimately leading to their collapse.

2. Were the containers designed to withstand such an explosion?

The containers used in the Tianjin explosion were not specifically designed to withstand such a large and powerful explosion. They were primarily used for storing non-hazardous materials and were not built to withstand the extreme forces generated by the explosion.

3. Did the contents of the containers contribute to their deformation?

The contents of the containers may have played a role in their deformation. The explosion was triggered by the ignition of hazardous materials stored in one of the containers, which may have added to the intensity of the blast.

4. How did the deformation of the containers impact the surrounding area?

The deformation of the containers in the Tianjin explosion caused significant damage to the surrounding area. The collapsing containers released their contents, which spread and further intensified the explosion. The debris from the containers also caused destruction and injuries to nearby buildings and individuals.

5. What measures can be taken to prevent similar incidents in the future?

To prevent similar incidents in the future, it is important to have strict regulations and safety protocols in place for the storage and handling of hazardous materials. Regular inspections and maintenance of containers should also be conducted to ensure their structural integrity. Additionally, emergency response plans and evacuation procedures should be established to minimize the impact of any potential explosion.

Similar threads

Replies
5
Views
3K
Replies
1
Views
1K
Replies
6
Views
789
  • Special and General Relativity
Replies
8
Views
959
  • Mechanics
Replies
5
Views
1K
Replies
2
Views
704
  • Astronomy and Astrophysics
Replies
11
Views
805
  • General Engineering
Replies
25
Views
9K
  • Sci-Fi Writing and World Building
2
Replies
50
Views
6K
Replies
16
Views
3K
Back
Top