Declared Net Capacity in Mega Watts Electrical

In summary: So, Palo Verde Nuclear Generating Station produces about 2% of the energy used in the United States annually.
  • #1
MastersBound
9
0
If a nuke units has a DNC of 1000 MWe, is this capacity per sec, hour, day, or year?

I'm "assuming" this capacity is per hour but then again a Watt is a unit of seconds.

In other words, If a nuke unit has declared net capacity (DNC) of 1000 MWe, how long would the unit have to run at 100% capacity before it actually supplied a 1000 MWe to the switchyard?

Any reference material that answers this question is greatly appreciated - NRC/ IAEA or the likes.

Thanks
 
Engineering news on Phys.org
  • #2
MastersBound said:
If a nuke units has a DNC of 1000 MWe, is this capacity per sec, hour, day, or year?

I'm "assuming" this capacity is per hour but then again a Watt is a unit of seconds.

In other words, If a nuke unit has declared net capacity (DNC) of 1000 MWe, how long would the unit have to run at 100% capacity before it actually supplied a 1000 MWe to the switchyard?

Any reference material that answers this question is greatly appreciated - NRC/ IAEA or the likes.

Thanks
1 W = 1 J/s. Watt is a unit of power, Joule is a unit of energy. Power is just the rate of energy per unit time.

With a DNC 1000 MWe (or 1 GWe) unit is expected to produce 1 GWe of electrical energy (net) with the unit at full rated (thermal) end and all equipment running. A 1 GWe unit will use about 50 MWe for pumps and various electrical systems on site, so there is also gross capacity. The net electrical generation is what can be sold on the grid to generate revenue.

The supply from generator to switchyard is more or less instantaneous.

http://www-pub.iaea.org/mtcd/publications/pdf/rds2-26_web.pdf

The NRC website refers to Net Electric (Energy) Generation
http://www.nrc.gov/reading-rm/basic-ref/glossary/net-electric-generation.html

Net Electric Generation would be based on integrating the Net Power over time (usually on a monthly or annual basis),
 
Last edited by a moderator:
  • #3
1 W = 1 J/s. Watt is a unit of power; Joule is a unit of energy. Power is just the rate of energy per unit time. Thanks Astronuc

So basically my previous question was erroneously worded due to your above explanation.

Let me try a different question to see if I’m getting the hang of this. Anybody feel free to comment.

Question:

Palo Verde Nuclear Generating Station is the largest nuclear plant in the United States averaging over 3.3 gigawatts (GW) of electrical power production and is located in Wintersburg, Arizona. The facility consists of three pressurized water reactors each with a max electrical generating capacity of 1.2 gigawatts. Assuming the plant is on a two year refueling cycle, how much electrical energy will Palo Verde Nuclear Generating Station produce between refueling cycles? Note: All three units refuel at the same time.

Answer:

24 hours/day x 365 days/year x 2 years = 17,520 hours, and 17,520 hours x 3.3 gigawatts (GWe) = 57.8 terawatt hours (TWh) of energy. Now, 1 Watt = 1 Joule/second, so, 57.8 TJh/s x 3600 sec/hour = approx 0.2 exajoule (EJ).

So, in a given two year refueling period Palo Verde Nuclear Generating Station produces approximately 57.8 terawatt hours (TWh) or 0.2 exajoule (EJ) of energy.


To put this into perspective, Wikipedia stats “the 2011 earthquake and tsunami in Japan had 1.41 EJ of energy according to its 9.0 on the Richter magnitude scale. Energy in the United States used per year is roughly 94 EJ.”
 

Related to Declared Net Capacity in Mega Watts Electrical

1. What is Declared Net Capacity in Mega Watts Electrical?

Declared Net Capacity in Mega Watts Electrical (MW) is a measurement of the maximum amount of electrical power that a power plant or generator can produce at a given time. It takes into account the efficiency and capability of the equipment, as well as any potential limitations or restrictions.

2. How is Declared Net Capacity calculated?

Declared Net Capacity is calculated by multiplying the rated capacity of a power plant or generator (in MW) by the plant's capacity factor. The capacity factor takes into account the plant's efficiency and any downtime or maintenance that may occur, resulting in a more accurate representation of the plant's actual output.

3. Why is Declared Net Capacity important?

Declared Net Capacity is important because it provides an indication of the maximum amount of electricity that a power plant or generator can produce at any given time. This information is crucial for grid operators to ensure a stable and reliable supply of electricity to consumers.

4. How does Declared Net Capacity differ from Nameplate Capacity?

Nameplate Capacity is the maximum amount of power that a generator or power plant is designed to produce under ideal conditions. It does not take into account factors such as efficiency or downtime. Declared Net Capacity, on the other hand, is a more realistic measure of a plant's actual output.

5. Can Declared Net Capacity change over time?

Yes, Declared Net Capacity can change over time due to various factors such as equipment upgrades, changes in technology, or changes in environmental regulations. It is important for power plants to regularly update their Declared Net Capacity to ensure accurate information is available to grid operators.

Similar threads

Replies
7
Views
2K
Replies
9
Views
2K
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
7
Views
3K
  • Engineering and Comp Sci Homework Help
Replies
2
Views
2K
  • Sci-Fi Writing and World Building
Replies
4
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
6K
  • Introductory Physics Homework Help
Replies
2
Views
2K
  • Engineering and Comp Sci Homework Help
Replies
12
Views
4K
  • Introductory Physics Homework Help
Replies
6
Views
3K
Back
Top