Current in Series: Reasons Behind Sources Not Adding Up

In summary, Wilfred Pickles asked people what would happen if an unstoppable force met an immovable object, and many of the people interviewed said that something would have to give.
  • #1
amaresh92
163
0
whats the reason behind that the current sources doesn't add in series?.
advanced thanks
 
Engineering news on Phys.org
  • #2
amaresh92 said:
whats the reason behind that the current sources doesn't add in series?.
advanced thanks

Why would you think that they SHOULD add in series?

As a rough analogy, think of pulling on one end of a strong wire with a force F. The other end of the wire is attached to something that then feels the force F. Now make the wire twice as long by adding a wire in series with it and pull on one end with force F. What does the other end feel?
 
  • #3
KCL at the node of two current source in series breaks down. Current into the node does not equal current out of the node. But if the current sources are in parallel, you can use KCL to add up their currents.
 
  • #4
Really ideal current sources, connected in series, constitute an impossible situation - like ideal voltage sources connected in parallel. The two will just fight each other and produce a lot of smoke and molten metal. You can't insist on 1A flowing into one end of a wire and 2A flowing out at the other end. Where would all the charge come from to make up the difference?
 
  • #5
sophiecentaur said:
Really ideal current sources, connected in series, constitute an impossible situation - like ideal voltage sources connected in parallel. The two will just fight each other and produce a lot of smoke and molten metal. You can't insist on 1A flowing into one end of a wire and 2A flowing out at the other end. Where would all the charge come from to make up the difference?

Excellent point.

amaresh92, do you understand this?
 
  • #6
sophiecentaur said:
Really ideal current sources, connected in series, constitute an impossible situation - like ideal voltage sources connected in parallel. The two will just fight each other and produce a lot of smoke and molten metal. You can't insist on 1A flowing into one end of a wire and 2A flowing out at the other end. Where would all the charge come from to make up the difference?
Picking nits, but "ideal" sources will never cause smoke and molten metal, since they are purely theoretical.

As was said though, one of the most basic properties of series circuits, as codified in Kirchoff's Current Law, is that the current must be exactly the same through all of the components. If you think it through, it wouldn't make sense for it to be any other way, since the electrons going into and out of the line would not add up, and the cosmic account will get so pissed that you made him work through the weekend to rebalance the books he's liable to short-change you on your "metabolism" budget.
 
  • #7
KVL also breaks for current sources in series. A current source can be viewed as having infinite source resistance. That's why when you turn off a current source, you are left with an open.

When two current sources are in series, one current source sees the other current source as a series resistor having an infinite resistance, and vice versa. As a result, a term in the KVL equation for an infinite resistance (due to one current source) will give you an infinity, since V = IR. So this is just undefined.

In other words, the first current source is forcing a constant current into an open circuit of the second current source. And the second current source is forcing a constant current into an open circuit of the first current source.
 
  • #8
phinds said:
Excellent point.

amaresh92, do you understand this?

ya got it
 
  • #9
Jiggy-Ninja said:
Picking nits, but "ideal" sources will never cause smoke and molten metal, since they are purely theoretical.

Yes, of course but a bit of graphics always helps in pointing out absurdities.
 
  • #10
"" Yes, of course but a bit of graphics always helps in pointing out absurdities. ""

AMEN !

often it's a useful tool of logic to test some idea by extrapolation to its extreme.

ideal current sources in series would be an irrestible force meeting an immovable object,,
... and something's got to give
but I'm showing my age...
 
  • #11
In terms of energy, however, heed the law of conservation of energy.
 
  • #12
"ideal current sources in series would be an irrestible force meeting an immovable object,,
... and something's got to give
but I'm showing my age..."That was a favourite of Wilfred Pickles on Workers' Playtime. How's your memory?
 
  • #13
That was a new name to me.

growing up in S Florida we didn't receive BBC, just some of the US midwest clear channel stations ..

found him though: http://www.britishpathe.com/record.php?id=78306

my memory ? well ,,, as another song goes...

http://www.youtube.com/watch?v=HzSaoN2LdfU&feature=player_embedded

(apology - it's not physics)

old jim
 
  • #14
Wilfred Pickles used to have a popular daytime radio show (1950s) in which he used to interview 'ordinary people' and would ask them daft questions. One of which was "what happens when an unstoppable force meets an immoveable object?" AS none of them was academic, they couldn't give him a proper answer.
 
  • #15
sophiecentaur said:
Wilfred Pickles used to have a popular daytime radio show (1950s) in which he used to interview 'ordinary people' and would ask them daft questions. One of which was "what happens when an unstoppable force meets an immoveable object?" AS none of them was academic, they couldn't give him a proper answer.
The real answer, if we use Newton's law and consider the immovable object to be of infinite mass and the unstoppable force to have infinite Newtons, is that the acceleration of the object can be any finite number.

Or something like that. It's been a few years since I had calculus class.
 

Related to Current in Series: Reasons Behind Sources Not Adding Up

1. What is the concept of current in series?

The concept of current in series refers to the flow of electrical charge through a circuit where the components are connected one after the other in a single path. In this configuration, the same amount of current flows through each component and the individual currents add up to the total current in the circuit.

2. Why might the sources not add up in a series circuit?

The sources in a series circuit may not add up due to a variety of reasons such as a faulty component, incorrect wiring, or unequal resistance in the circuit. Additionally, if the sources are not connected in series, the currents will not add up as expected.

3. How can I troubleshoot sources not adding up in a series circuit?

To troubleshoot sources not adding up in a series circuit, you can follow these steps:

  • Check for any faulty components and replace them if needed.
  • Ensure that all components are connected in series and not in parallel.
  • Measure the resistance of each component to check for any unequal values.
  • Double-check the wiring to ensure it is correct.

4. Can adding more sources in a series circuit increase the total current?

No, adding more sources in a series circuit will not increase the total current. This is because the sources are connected in series, meaning the same amount of current flows through each one. Adding more sources will only increase the voltage in the circuit, not the current.

5. Are there any exceptions to sources adding up in a series circuit?

Yes, there are a few exceptions to sources adding up in a series circuit. If one or more sources have internal resistance, the total current may not be equal to the sum of individual currents. Additionally, if the sources are not connected in series, the currents will not add up as expected.

Similar threads

  • Electrical Engineering
Replies
5
Views
169
Replies
42
Views
3K
Replies
8
Views
820
Replies
3
Views
2K
Replies
10
Views
1K
Replies
4
Views
1K
  • Electrical Engineering
Replies
11
Views
463
Replies
44
Views
3K
Replies
31
Views
2K
  • Electrical Engineering
Replies
10
Views
1K
Back
Top