Calculation of the reaction forces on a welded joint

Engineering
Thread starter Amaelle
Start date Feb 3, 2021
Tags

Calculation Forces Joint Reaction Reaction forces

In summary, calculating reaction forces on a welded joint is crucial for ensuring structural integrity and safety. These forces are typically calculated using principles of statics and mechanics, but can be affected by various factors such as materials, joint design, and external forces. It is important to consider both tensile and compressive forces in these calculations to accurately assess the strength of the joint. Methods such as destructive and non-destructive testing, as well as finite element analysis, can be used to validate the accuracy of these calculations.

Feb 3, 2021

Amaelle

Homework Statement: The welded joint shown below has the following geometric characteristic : s=8 mm h=120 mm b=300 mm, a=10 mm, the joint is made of steel S355 (with fu=510 Mpa)and is loaded with two external forces P1=8KN et P2=8KN (look at the image below)
Calculate:
-The vertical reaction acting on the most critical weld line?
-the horizontal reaction acting on the most critical weld line?

Relevant Equations: Stresses in the welded joint

Here is my solution I just need it to be confirmed

Many thanks in advance!

Physics news on Phys.org

Feb 3, 2021

Lnewqban

Homework Helper

Gold Member

Could you reload the pictures of your work?
They seem to be blurry.

Feb 3, 2021

Amaelle

Sure here it is, thanks in advance!

Related to Calculation of the reaction forces on a welded joint

1. What is the purpose of calculating reaction forces on a welded joint?

The calculation of reaction forces on a welded joint is essential in determining the structural integrity and safety of the joint. It helps engineers and designers to ensure that the joint can withstand the expected loads and forces without failure.

2. How are reaction forces on a welded joint calculated?

Reaction forces on a welded joint are calculated using the principles of statics, which involve analyzing the external forces and moments acting on the joint and determining the internal forces and moments within the joint. This can be done through hand calculations or using computer-aided engineering software.

3. What factors affect the calculation of reaction forces on a welded joint?

The calculation of reaction forces on a welded joint is influenced by various factors such as the type and magnitude of external loads, the geometry and material properties of the joint, and the type of welding process used. Other factors include the presence of any pre-existing defects or residual stresses in the joint.

4. Are there any safety considerations when calculating reaction forces on a welded joint?

Yes, safety is a critical consideration when calculating reaction forces on a welded joint. Engineers must ensure that the joint can withstand the expected loads and forces without failure, and that the calculated reaction forces do not exceed the joint's design strength. It is also essential to consider any potential failure modes and take appropriate measures to prevent them.

5. How accurate are the calculations of reaction forces on a welded joint?

The accuracy of the calculations of reaction forces on a welded joint depends on various factors, such as the complexity of the joint, the accuracy of the input data, and the method used for the calculation. Generally, hand calculations may have a higher margin of error compared to computer-aided engineering software, but both methods can provide reliable results when done correctly.