Calculating Tension Forces in a Frictionless Pulley System

In summary, we discussed the concept of a man standing on a platform with an attached frictionless pulley, supporting himself in midair with zero acceleration. We determined that the upward force exerted by the man is equal to the downward force of gravity and is also equal to twice the tension in the rope. We then considered the forces acting on the system and determined that the upward force is the pull of the rope, while the downward force is the weight of the system. By setting up equations using these forces, we were able to solve for the required force (F) in terms of the given masses (M and m) and acceleration (a). The final solution was F = (1/2)(M+m)g.
  • #1
Destrio
212
0
A man standing on a platform with an attached frictionless pulley is supporting himself at a fixed position in midair (zero acceleration). What force F is required to do this? Solve for F for a man of arbitrary mass M, and a platform plus pulley of arbitrary mass m.

So, since a = 0 : Fnet = 0
Fnet = Fu - Fg = 0
Fu = Fg
Fu being the upward force exerted by the man

I'm not sure if I can use Fu as an upward force since there will be 2 tensional forces

How can I apply the T forces between the man and the pulley, and the pulley and the roof
could i do
Fnet = T1 + T2 - Fg = 0
?

Thanks
 
Physics news on Phys.org
  • #2
You're on the right track. Consider the man+platform as a system. What forces act on it?

Hint: What can you say about the tension in each section of the rope?

Hint 2: How does the force the man exerts relate to the tension in the rope?
 
  • #3
for the man + platform we have force of gravity, the normal force of the platform on the man (although that could be irrelevant if we are thinking of the man+platform as a system), and the tensional force of the string the man is holding

would the tension of each section of the rope be equal?
t1 = t2 ?

the force the man exerts should be equal to the tension of the rope?
 
  • #4
All correct. Keep going.
 
  • #5
ok
Fnet = 0
t1 = t2
Ttotal = t1 + t2 = Fman

im not sure how to relate the force of gravity to these other forces

would the force of gravity be opposite to the total tension forces, being equal to the force the man exerts

or, would the force the man exerts be equal to a single tension force:
t1 = t2 = Fman

making the force the man exerts twice the force of gravity?
 
  • #6
Destrio said:
ok
Fnet = 0
t1 = t2
OK.

Ttotal = t1 + t2 = Fman
Not OK.

im not sure how to relate the force of gravity to these other forces

would the force of gravity be opposite to the total tension forces,
Yes!
being equal to the force the man exerts
No!

or, would the force the man exerts be equal to a single tension force:
t1 = t2 = Fman
Yes.

making the force the man exerts twice the force of gravity?
No.

(1) What upward forces act on the system?
(2) What downward forces act on the system?
 
  • #7
ok
Fnet = 0
t1 = t2 = Fman

t1 + t2 = -Fg
is this correct?

upward forces:
Force of the man on the string
Force of the roof on the string

downward forces:
force of gravity on the platform + man
force of the string on the man
force of the string on the roof

Fms + Frs = Fg + Fsm + Fsr

Fms = Fsm
Frs = Fsr

Do I have to account for any normal forces?
 
  • #8
Destrio said:
Fnet = 0
t1 = t2 = Fman
OK.
t1 + t2 = -Fg
is this correct?
Almost. From Fnet = 0 we know that: t1 + t2 -Fg = 0
Or: t1 + t2 = Fg

That's really all you need to solve this one. (Combine these equations together to solve for Fman.)

upward forces:
Force of the man on the string
Force of the roof on the string
The upward force on the system is just the pull of the rope. The rope attaches twice--once to the man's hand and once to the platform--so the total upward force is twice the tension.

downward forces:
force of gravity on the platform + man
force of the string on the man
force of the string on the roof
The downward force is just the weight of the system.
 
  • #9
Fnet = 0
t1 = t2 = Fman
t1 + t2 - Fg = 0
t1 + t2 = Fg

so

Fman + Fman = Fg
2Fman = Fg
Fman = (1/2)Fg
 
  • #10
Perfecto! Now just express Fg (and then Fman) in terms of the given information: M and m.
 
  • #11
ah yes

Fnet = 0
t1 = t2 = Fman
t1 + t2 - Fg = 0
t1 + t2 = Fg

Fman + Fman = Fg
2Fman = Fg
Fman = (1/2)Fg

Fman = (M+m)a
Fg = (M+m)g

Fman = (1/2)(M+m)g
 
  • #12
Excellent.
 
  • #13
thanks very much for your help
 

Related to Calculating Tension Forces in a Frictionless Pulley System

1. What is a tension force pulley problem?

A tension force pulley problem involves calculating the tension force in a rope or cable that is passing over a pulley. The force exerted by the rope on the pulley is known as the tension force and understanding this force is crucial in many engineering and physics applications.

2. How do you calculate tension force in a pulley system?

To calculate the tension force in a pulley system, you need to consider the forces acting on the pulley. These include the weight of the object being lifted, the weight of the pulley itself, and any external forces such as friction. By using Newton's laws of motion and the principle of equilibrium, you can determine the tension force in the rope or cable.

3. What factors affect the tension force in a pulley system?

The tension force in a pulley system is affected by the weight of the object being lifted, the angle of the rope or cable as it passes over the pulley, and the number of pulleys in the system. Friction and the weight of the pulley itself can also play a role in the calculation of tension force.

4. How can tension force pulley problems be applied in real-world situations?

Tension force pulley problems can be applied in many real-world situations, such as determining the tension force in a crane lifting a heavy object, or calculating the tension force in a cable car system. These calculations are also important in designing and analyzing various mechanical systems, such as conveyor belts and elevators.

5. What are some common mistakes made when solving tension force pulley problems?

Some common mistakes made when solving tension force pulley problems include forgetting to consider the weight of the pulley itself, not taking into account frictional forces, and using incorrect equations or values. It is important to carefully analyze all the forces acting on the pulley system and use the correct equations to ensure an accurate solution.

Similar threads

  • Introductory Physics Homework Help
Replies
10
Views
3K
  • Introductory Physics Homework Help
Replies
4
Views
1K
  • Introductory Physics Homework Help
Replies
30
Views
2K
  • Introductory Physics Homework Help
2
Replies
38
Views
1K
  • Introductory Physics Homework Help
Replies
10
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
9
Views
1K
  • Introductory Physics Homework Help
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
26
Views
2K
  • Introductory Physics Homework Help
Replies
4
Views
936
Back
Top