Calculating Rainfall Rate for Basement Flooding Risk | Bernoulli's Equation"

In summary, The rain drainage system for a home involves a simplified schematic with a slanted roof, gutters, downspouts, a main drainage pipe, and a larger pipe below the street. The downspouts have a height of 11m, the floor drain has a height of 1.2m, pipe M has a radius of 3cm, the house has a width of 30m and a length of 60m, and all water from the roof goes through pipe M. The initial speed of the water in the downspouts and wind speed are both negligible. To determine the rainfall rate that would cause water from pipe M to reach the height of the floor drain and potentially flood the basement, the equation
  • #1
mb218
3
0

Homework Statement


A very simplified schematic of the rain drainage system for a home is shown. Rain falling on the slanted roof runs off into gutter around the roof edge it then drains through downspouts into a main drainage pipe M below the basement which carries the water to an even larger pipe below the street. Apply the following:

1.)the downspouts have h1= 11m
2.)the floor drain has height h2=1.2m
3.)pipe M has radius 3cm
4.) the house has side width w=30 m and front length L=60 m
5.) all the water striking the roof goes through pipe M
6.) the initial speed of the water in a downspout is negligible
7.) the wind speed is negligible

At what rainfall rate, in centimeters per hour, will water from pipe M reach the height of the floor drain and threaten to flood the basement.



Homework Equations



p+ .5 rho v^2+rho gh=p+.5 rho v^2+rho gh
AV=av

The Attempt at a Solution


A=a so V=V
 

Attachments

  • physics.jpg
    physics.jpg
    15.3 KB · Views: 615
Physics news on Phys.org
  • #2
I also figured out that the v at the end of the pipe of length h1= 146 cm/s by using v^2=v0^2+2gh
 

Related to Calculating Rainfall Rate for Basement Flooding Risk | Bernoulli's Equation"

1. What is Bernoulli's equation?

Bernoulli's equation is a fundamental equation in fluid dynamics, named after Swiss mathematician Daniel Bernoulli. It describes the relationship between the flow speed of a fluid and the pressure exerted by that fluid.

2. What is the significance of Bernoulli's equation in science and engineering?

Bernoulli's equation is important in many areas of science and engineering, including aerodynamics, hydrodynamics, and thermodynamics. It is used to analyze and predict the behavior of fluids in motion, and is the basis for many engineering designs such as airplanes, turbines, and pumps.

3. Can Bernoulli's equation be applied to all types of fluids?

Yes, Bernoulli's equation can be applied to all types of fluids, including liquids and gases. However, it is most accurate for incompressible fluids, meaning fluids that do not change volume when subjected to pressure.

4. What are the assumptions made in Bernoulli's equation?

Bernoulli's equation is based on the assumptions of steady, incompressible flow and no energy losses due to friction or turbulence. It also assumes that the fluid is non-viscous, meaning it has no internal friction that would resist its flow.

5. How is Bernoulli's equation derived?

Bernoulli's equation is derived from the principle of conservation of energy, which states that energy cannot be created or destroyed, only transferred. The equation is based on the idea that the total energy of a fluid at any point along a streamline remains constant throughout its flow.

Similar threads

  • Introductory Physics Homework Help
Replies
6
Views
4K
  • Introductory Physics Homework Help
Replies
14
Views
1K
Replies
3
Views
1K
  • Introductory Physics Homework Help
Replies
3
Views
2K
Replies
8
Views
2K
  • Introductory Physics Homework Help
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
10
Views
5K
Replies
1
Views
2K
Replies
7
Views
2K
Replies
3
Views
7K
Back
Top