Bouyant force when there is no liquid beneath an object

In summary, when you put a block of a certain density into a vessel with a liquid at the bottom, the block will rise to the top due to the buoyant force.
  • #1
Titan97
Gold Member
450
18

Homework Statement


A block floating on water contained in a vessel is pushed inside until it touches the bottom of the vessel and then released. Will the block come back?

Homework Equations

The Attempt at a Solution


[/B]
Bouyant force acts because the pressure on the bottom of the block is more than that at the top.

If the block was cubical and its top surface is at a distance $h$ from the surface of water, and had a side length $a$, then the pressure on top will be ##P_0+\rho gh##

Pressure on bottom surface will be ##P_0+\rho g(h+a)##

Pressure difference = ##\rho g a##

Force acting is = ##\rho g a\cdot a^2=a^3\rho g##

If the bottom surface of the cube were to touch the bottom of vessel, then there is no water beneth it to exert pressure upwards. So won't the block remain in the bottom even if its density is less than that of the liquid?
 
Physics news on Phys.org
  • #2
The block was floating "on the water" initially. So the buoyant force exerted by the water at this position was equal to the weight of the block. Equilibrium was established.
So at no position other than the initial position will the block be in equilibrium.
Hence it will rise back up to its initial position after you take it to a certain depth.
 
  • #3
Titan97 said:
If the bottom surface of the cube were to touch the bottom of vessel, then there is no water beneth it to exert pressure upwards. So won't the block remain in the bottom even if its density is less than that of the liquid?
Hi Titan:

If the cube and the bottom are perfectly smooth, and someone forces the cube so that the bottom side of the cube was pressed against the bottom, then is there any substance between the bottom side of the cube and the bottom of the vessel? If not, is this the same as a vacuum? Compare this with a somewhat rough cube and/or a rough bottom.

Hope this helps.

Regards,
Buzz
 
  • Like
Likes billy_joule
  • #4
So its same as a suction pump.
 
  • #5
Titan97 said:
So its same as a suction pump.
Hi Titan:

I am not sure what the antecedent is of "its".

Regards,
Buzz
 
  • #6
The situation. The block attached to the bottom.
 
  • #7
Titan97 said:
So its same as a suction pump.
Titan97 said:
The situation. The block attached to the bottom.
Hi Titan:

I am still having a problem with the phrasing. Supposed I snugly put the cube into a vertically oriented square-shaped cylinder and lowered the cylinder to the bottom of the tank. Then I used a suction pump to remove all the water in the cylinder below the cube. The vacuum in the cylinder below the cube would cause the cube go to down the cylinder to the bottom of the tank.

Is this the meaning you have in mind for the quotes above?

Regards,
Buzz
 
  • #8
Have you seen suction cups? The cube being stuck to the bottom of the vessel is just like a suction cup stuck to a wall. There is no medium beneath cube.
 
  • #9
Titan97 said:
Have you seen suction cups? The cube being stuck to the bottom of the vessel is just like a suction cup stuck to a wall. There is no medium beneath cube.
Hi Titan:

That is mostly right, but not completely correct. A suction cup has tension in it that maintains the (partial) vacuum which helps make the suction stable. The cube pressed onto the bottom doesn't have this, and any small disturbance of the cube will allow water to get beneath it, and it will rise. Heisenberg's Uncertainty Principle implies that there is a positive probability that after a sufficient time quantum effects will allow water to get underneath the cube and let it rise.

Regards,
Buzz
 

1. What is buoyant force?

Buoyant force is the upward force exerted on an object when it is submerged in a fluid, such as liquid or gas.

2. How is buoyant force calculated?

Buoyant force is calculated by multiplying the density of the fluid, the acceleration due to gravity, and the volume of the submerged portion of the object.

3. Does buoyant force act on objects only in liquids?

No, buoyant force can act on objects in both liquids and gases. However, it is more commonly observed in liquids due to their higher density.

4. Can an object experience buoyant force even when there is no liquid beneath it?

Yes, an object can still experience buoyant force even when there is no liquid beneath it. This is because the surrounding air or gas can still exert pressure on the object, causing it to experience an upward force.

5. How does the shape and density of an object affect the buoyant force it experiences?

The shape and density of an object can greatly affect the buoyant force it experiences. Objects with a greater volume and lower density will experience more buoyant force, while objects with a smaller volume and higher density will experience less buoyant force.

Similar threads

  • Introductory Physics Homework Help
Replies
11
Views
395
  • Introductory Physics Homework Help
Replies
29
Views
2K
  • Introductory Physics Homework Help
2
Replies
60
Views
3K
  • Introductory Physics Homework Help
Replies
3
Views
915
  • Introductory Physics Homework Help
Replies
5
Views
916
  • Introductory Physics Homework Help
Replies
18
Views
2K
  • Advanced Physics Homework Help
Replies
5
Views
961
  • Introductory Physics Homework Help
Replies
6
Views
3K
  • Introductory Physics Homework Help
Replies
14
Views
1K
  • Introductory Physics Homework Help
Replies
11
Views
1K
Back
Top