Bernoulli's Equation and pressure increase

In summary: Typically though, unless these specific forms are mentioned, bernoulli's equation means the form applied along a streamline, for steady state, imcompressible, and inviscid flow.
  • #1
tonyjk
227
3
Hi all,
please i would like to know physically why when the pressure increase the speed decrease and vice-versa in a flow?
Thanks
 
Physics news on Phys.org
  • #2
Think of this the other way around. Imagine you have a higher pressure zone and a lower pressure zone reasonably close to each other. The flow will accelerate away from the higher pressure zone towards the lower pressure zone. As long as there are no additional forces or work done on the flow other than the pressure zones, then Bernoulli applies and Bernoulli equation relates the increase in speed versus the decrease in pressure of the flow between the two pressure zones.

There would need to some external energy source in order to create and/or maintain those pressure zones, but Bernoulli isn't being applied to that process, only to the flow between the two pressure zones.
 
  • #3
thank you.. so the pressure of the fluid is doing work(internal energy let's say) on the fluid right?
 
  • #4
tonyjk said:
thank you.. so the pressure of the fluid is doing work(internal energy let's say) on the fluid right?
Yes, that is when Bernoulli applies.

Where Bernoulli doesn't apply is in the case where external work is done on a flow. For example, in the immediate vicinity of a propeller, there's a pressure jump with little or ideally, no change in speed. This the area where work is performed by the propeller, which violates Bernoulli. However Bernoulli does apply to the flow fore and aft of the propeller, assuming no other external forces are involved.
 
Last edited:
  • #5
rcgldr said:
Where Bernoulli doesn't apply is in the case where external work is done on a flow. For example, in the immediate vicinity of a propeller, there's a pressure jump with little or ideally, no change in speed. This the area where work is performed by the propeller, which violates Bernoulli. However Bernoulli does apply to the flow fore and aft of the propeller, assuming no other external forces are involved.

Bernoulli's equation also does not apply to unsteady flows, compressible flows or flows with dissipative phenomena such as viscosity. Those are part of the assumptions used in the derivation of the equation.
 
  • #6
boneh3ad said:
Bernoulli's equation also does not apply to unsteady flows, compressible flows or flows with dissipative phenomena such as viscosity. Those are part of the assumptions used in the derivation of the equation.

For steady, non-dissipative flows with a steady state relation between pressure and density, say in form of a power-law, Bernoulli-like equations may readily be derived for such compresible cases.
they even have their uses.
 
  • #7
arildno said:
For steady, non-dissipative flows with a steady state relation between pressure and density, say in form of a power-law, Bernoulli-like equations may readily be derived for such compresible cases.
they even have their uses.
Yes, these are often called "unsteady bernoulli" for unsteady flow, "compressible bernoulli" for compressible flow, or "extended bernoulli" for viscous flow. Or there is even a version of the same form that doesn't need to be applied along streamlines if your flow is irrotational.

Typically though, unless these specific forms are mentioned, bernoulli's equation means the form applied along a streamline, for steady state, imcompressible, and inviscid flow.
 

Related to Bernoulli's Equation and pressure increase

1. What is Bernoulli's Equation?

Bernoulli's Equation is a fundamental principle in fluid mechanics that describes the relationship between fluid velocity, pressure, and potential energy. It states that as the velocity of a fluid increases, the pressure decreases, and vice versa.

2. How does Bernoulli's Equation relate to pressure increase?

Bernoulli's Equation can be used to explain the phenomenon of pressure increase in a fluid, such as when the fluid is flowing through a narrowing pipe. As the fluid's velocity increases due to the decrease in cross-sectional area, the pressure decreases according to the equation.

3. What are the units of measurement for Bernoulli's Equation?

The units of measurement for Bernoulli's Equation are typically given in terms of pressure (e.g. pascals, bars, pounds per square inch) and velocity (e.g. meters per second, feet per second). However, the equation can also be used with other units of measurement as long as they are consistent.

4. Can Bernoulli's Equation be used for all types of fluids?

Bernoulli's Equation is valid for incompressible fluids, meaning that the fluid's density remains constant even as the velocity and pressure change. It may also be used for compressible fluids under certain conditions, but the equation will need to be modified to account for changes in density.

5. How is Bernoulli's Equation used in real-world applications?

Bernoulli's Equation has many practical applications, such as in the design of airfoils for airplanes and the calculation of flow rates in pipes. It is also used in weather forecasting to understand the flow of air around high and low pressure systems. In addition, it is important in understanding the circulation of blood in the human body and the function of ventilation systems in buildings.

Similar threads

Replies
4
Views
2K
  • Mechanics
2
Replies
43
Views
5K
Replies
19
Views
1K
Replies
7
Views
2K
  • Mechanics
Replies
2
Views
2K
  • Mechanics
Replies
11
Views
2K
Replies
9
Views
5K
Replies
9
Views
2K
Replies
4
Views
1K
Replies
2
Views
4K
Back
Top