Analog clock algebra word problem

In summary, the conversation discusses defining the time in an analog clock up to the second where the minute hand and hour hand are in the same position between the 10th and 11th hour. The conversation explores the use of coordinates and an equation to determine the position of the hands at different times. It is determined that the hour hand moves at a rate of 0.5 degrees per minute while the minute hand moves at a rate of 6 degrees per minute. It is also determined that the hands will meet again when the minute hand has traveled a full circle and some extra time, which can be calculated by dividing 60 minutes by the difference between the hour and minute hand turn rates. However, finding the exact point where the hands
  • #1
late347
301
15

Homework Statement


define the time in an analog clock up to the second. The time needs to be such that the minute hand, is at the exact same position as the hour hand. This position of the hands needs to be between 10th and 11th hour.

Homework Equations


3. The Attempt at a Solution
[/B]
I suppose that in the analog watch. If the time had been exactly 11:00. Then the minute hand is too far forward, but the hour hand would still be in the tolerances. I suppose that the answer is somewhere between [50-55] minutes. and I think it must necessarily be more towards the end part. Because already at the hypothetical time 10:45, the hour-hand is 3/4 finished at the hours interval.I'm definitely having ttrouble formulating an equation about this problem though. This was one of the tougher exercises in my book, and I just couldn't seem to crack it. I'm a bit stumped on this final problem and it has been nagging my brain a little bit.

I suppose one could get a watch and try to rewind the time from 11:00 until the hands are on top of each other but that would not get the correct seconds count. :)
 
Physics news on Phys.org
  • #2
You'll need some coordinate for the position of the hands - the hours are the most convenient choice (so 0 is directly up, 3 is to the right, and so on). For an integer T, at which position is the hour hand T hours after midnight/midday? At which position is the minute hand? Where are both if T is not an integer?
 
  • #3
late347 said:

Homework Statement


define the time in an analog clock up to the second. The time needs to be such that the minute hand, is at the exact same position as the hour hand. This position of the hands needs to be between 10th and 11th hour.

Homework Equations


3. The Attempt at a Solution
[/B]
I suppose that in the analog watch. If the time had been exactly 11:00. Then the minute hand is too far forward, but the hour hand would still be in the tolerances. I suppose that the answer is somewhere between [50-55] minutes. and I think it must necessarily be more towards the end part. Because already at the hypothetical time 10:45, the hour-hand is 3/4 finished at the hours interval.I'm definitely having ttrouble formulating an equation about this problem though. This was one of the tougher exercises in my book, and I just couldn't seem to crack it. I'm a bit stumped on this final problem and it has been nagging my brain a little bit.

I suppose one could get a watch and try to rewind the time from 11:00 until the hands are on top of each other but that would not get the correct seconds count. :)
Certainly the correct answer can be obtained with Algebra. However, you can narrow the possible correct result fairly simply.

Where are two hands at 10:50 ?

Where are the two hands at 10:55 ?
 
Last edited:
  • #4
mfb said:
You'll need some coordinate for the position of the hands - the hours are the most convenient choice (so 0 is directly up, 3 is to the right, and so on). For an integer T, at which position is the hour hand T hours after midnight/midday? At which position is the minute hand? Where are both if T is not an integer?

Well, if you choose midday as the basis. 12:00 noon

Then you have domain for T between (-2, -1) for the hour-hand itself
I don't know how that is relevant to the minute-hand,though.

Of course when T= -2
At that point the minute hand is exactly at 12 :00 noon. ( the time is exactly 10:00)

everybody knows that, when the hour-hand is exactly at an even hour (doesn't matter which hour, but an exact hour). Then logically therefore the minute hand must be at 12 o'clock together with the seconds-hand.

I guess that when the minutes hand shows 50 minutes past 10:00. Then the hour hand will have moved about to about 5/6 of the interval in the hours.
Then again in an alternative perspective.The hour hand has moved from the starting point at 12:00 (650minutes/60) = 10 hours + 0.833...hours
(10.833... hours/ 12 hours)*(360deg) = 325 degrees moved forwarrd. The minute-hand is about 300 degrees moved forward so it is still catching up to the hour hand.

at 10:55 hours...

The hour hand has moved to 327.5deg

the minute hand has passed over the hour hand at already 330 deg

Looks like it will be about 54 minutes necessary plus some amount of seconds for the correct time.

I still have little ideaa how this can be done algebraically. It's just not really clicking for me at all.
 
  • #5
late347 said:
Well, if you choose midday as the basis. 12:00 noon
Good start.
When next will the two hands align? Suppose the minute hand has traveled an angle theta. How far has the hour hand moved?
 
  • #6
Well I suppose that the minute hand is obviously faster in turn-rate in any case

When 60 minutes have passe then the hourhand moved 5 minutes in that time (1h interval in analog clocks is same interval as 5 min)

So the hourhand moves at 1/12 rate of the minute hand. You could call it turn rate I suppose.

Minute hand turns 6deg/minute and hourhand turns 0.5deg/minute

Essentially 360 deg traveled by the minutehand in 60 mins.

. Hourhand should be like (5÷60)×(360deg)=30 degrees

I did not get exactly when the hands meet again. But if you start the clock from 12:00.
Then the minute hand requires full 60minutes and then some extra.

If the time is like 65 minutes +(1min/3)
Then the minute hand has gone 32deg into the new circle which begins at 12:00 position.

Inbthat same time the hourhand moved 5 min already (already accounted for) +(1/12 × 5.333min)= 49min/9

(49min/9) ÷60 ×360=32.666...deg

So at that point the hour hand is only slightly ahead of the minute hand. I couldn't get an easy fixation somehow as to where exavtly the hands would meet.
 
  • #7
late347 said:
I couldn't get an easy fixation somehow as to where exavtly the hands would meet.
That's because you keep plugging in numbers instead of working with algebra.
How much faster is the minute hand, as a ratio? I ask again,
haruspex said:
Suppose the minute hand has traveled an angle theta. How far has the hour hand moved?
 
  • #8
haruspex said:
Good start.
When next will the two hands align? Suppose the minute hand has traveled an angle theta. How far has the hour hand moved?

well, if we are given that angle theta exists for minutehand. This means that in the same period of time which has passed. The hourhand has moved angle theta/12if the minute hand travels 360 degrees then it must quite necessarily be, that the hour hand travels one twelfth of that =30deg.
so the minutehand travels theta degrees
hour hand travels theta/12

In clocks the turn-rate (or speed?) of the hands, is constant speed, ideally speaking. Maybe not in practical mechanical watches, but in theory.
 
  • #9
late347 said:
This means that in the same period of time which has passed the hourhand has moved angle theta/12
Right. If the minute hand has lapped the hour hand, how much further has it travelled? What equation does that give you?
 
  • #10
haruspex said:
Right. If the minute hand has lapped the hour hand, how much further has it travelled? What equation does that give you?


I don't quite follow. :sorry:

I suppose if I knew the equation already so easily then I would have solved the problem already.

How can you make the one side of the equation equate to the other side when the hourhand and minutehand are not actually equal...(in degrees of travels from 12:00 until the next overlapping position)

I guess when the minutehamd cranks the full circle + (then some degrees). It would be over 360deg.

Essentially there's more degrees which have been cranked by the minutehand. Or is that the wrong way to think about the minutehand?

For the actual problem the required overlapping time was between 10th and 11th hours though)

(Assuming start location at 12:00: with 0 seconds)
 
  • #11
late347 said:
Essentially there's more degrees which have been cranked by the minutehand. Or is that the wrong way to think about the minutehand?
Yes. When it catches the hour hand up the first time after 12 midday, how many extra degrees has it travelled?
 
  • #12
Well this question looked like it was not easily solvable at least for myself and with the tips given to me.

I think without further input I will abandon this problem because I haven't made any progress and I have other homework and projects inthe pipeline so to say.

I asked my stepfather for a little bit of help but he failed to achieve the correct answer also. The problem's difficulty level was ostensibly high school level math textbook.

My stepdad is somewhat of a math whiz and he's a mathematics major from Helsinki university and a retired insurance analyst/specialist.
 
  • #13
haruspex gave multiple hints how to approach that problem, you did not follow those so far. It is quite a basic problem if you take the right approach.
 
  • #14
Apparently not quite basic enough, the problem that is.

Alternatively I myself am too basic in my brain to solve the problem. Honestly I was a little surprised that my stepfather couldn't solve the problem because he is one of the mathematically smartest people I know in real life. I took a photo directly of the problem assignment so it's not because of a misunderstanding of the problem statement.

I suppose I will do my official homework instead because those problems give credit to the course grade. And theyre easier haha :smile:
 
  • #15
late347 said:
Apparently not quite basic enough, the problem that is.

Alternatively I myself am too basic in my brain to solve the problem. Honestly I was a little surprised that my stepfather couldn't solve the problem because he is one of the mathematically smartest people I know in real life. I took a photo directly of the problem assignment so it's not because of a misunderstanding of the problem statement.

I suppose I will do my official homework instead because those problems give credit to the course grade. And theyre easier haha :smile:
I'm not quite ready to give up.
A hare and a tortoise race around a 100m circular track. When the hare laps the tortoise for the first time, how much further has the hare run than the tortoise has?
 
  • #16
The hour hand moves 1/12 as fast as the minute hand. So if the clock starts at 10 o'clock, the hour hand starts at 50 minutes and the minute hand starts at 0 minutes. If the minute hand is later located at m minutes, at what minute is the hour hand located?
 
  • #17
late347 said:
Apparently not quite basic enough, the problem that is.

Alternatively I myself am too basic in my brain to solve the problem. Honestly I was a little surprised that my stepfather couldn't solve the problem because he is one of the mathematically smartest people I know in real life. I took a photo directly of the problem assignment so it's not because of a misunderstanding of the problem statement.

I suppose I will do my official homework instead because those problems give credit to the course grade. And theyre easier haha :smile:

Watch this video, and show it to your stepfather, too. Note, at what times are minute hand and the hour hand at the same position. There are such events in every hour. You need to find that time between 10h and 11h.
 
  • #18
Chestermiller said:
The hour hand moves 1/12 as fast as the minute hand. So if the clock starts at 10 o'clock, the hour hand starts at 50 minutes and the minute hand starts at 0 minutes. If the minute hand is later located at m minutes, at what minute is the hour hand located?
I'm not sure I can answer that question because the clockface resets itself at the 0 minute. Like... it is only possible to have 60 minutes at maximum.
Or is this irrelevant to the issue. I read that post as though you wanted to know the exact clockface.

but if m means number of minutes traveled forwards.
the minutes traveled with the hour-hand will have been
50+m(1/12)
because 50 was the starting point for the hour hand. And the second part is the added minutes.
 
  • #19
late347 said:
I'm not sure I can answer that question because the clockface resets itself at the 0 minute. Like... it is only possible to have 60 minutes at maximum.
Or is this irrelevant to the issue. I read that post as though you wanted to know the exact clockface.

but if m means number of minutes traveled forwards.
the minutes traveled with the hour-hand will have been
50+m(1/12)
because 50 was the starting point for the hour hand. And the second part is the added minutes.
Excellent. So, when the two hands are at the same location,$$50+\frac{m}{12}=m$$ From this equation, what is the value of m?
 
  • #20
m = 54.5454...

So do you suppose that 4 minues and 32.72 seconds time (the time which is past the starting time of 10:50: 0 seconds) the hands should be in equal position measured in e.g. degrees from 0deg= 12 o clock

Can you explain in precise English wording what does the variable m ostensibly represent in that equation. I think that was the confusing part in the end for myself.

m represents what with regards to the word problem?
 
  • #21
late347 said:
m = 54.5454...

So do you suppose that 4 minues and 32.72 seconds time (the time which is past the starting time of 10:50: 0 seconds) the hands should be in equal position measured in e.g. degrees from 0deg= 12 o clock

Can you explain in precise English wording what does the variable m ostensibly represent in that equation. I think that was the confusing part in the end for myself.

m represents what with regards to the word problem?
m is the number of minutes past 10 o'clock (as measured by the minute hand).

Here is a similar problem. A and B are having a race. A is driving a car at 60 km/hr and B is walking at 5 km/hr. To make things fair, A gives B a 50 km head start. How long does it take A to catch up with B? How far did A and B each travel during this time?
 
  • Like
Likes late347
  • #22
Chestermiller said:
m is the number of minutes past 10 o'clock (as measured by the minute hand).

Here is a similar problem. A and B are having a race. A is driving a car at 60 km/hr and B is walking at 5 km/hr. To make things fair, A gives B a 50 km head start. How long does it take A to catch up with B? How far did A and B each travel during this time?

I suppose this example was easier to digest. The clocktheme with the minutes seconds and the clock hands got a little bit confusing at times. Also I was unsure how to approach the circular movement idea...

if A and B have spent the equal time (which they do spend). Then essentially when they have traveled equidistant amount in the same time. At that timestamp there is the overtaking moment when cars are side-by-side. Also the speeds are given as constant speeds for both cars.

equatino could be something like
5x + 50 = 60x
where x itself ought to be the variable for the timestamp of the overtaking moment

where each side of the equation should produce equal distances for each car. Constant speed times the time, equals distance.
x= 0.9090 hours
the distance traveled ought to be exactly the same, otherwise there is not any point at which the overtaking occurs.
distance = 54.54km measured from the start location of the fast car (not the guy who had the head start)

EDIT: OOPS person B did not even have a car, but he was a walking pedestrian. :woot:
 
  • #23
late347 said:
I suppose this example was easier to digest. The clocktheme with the minutes seconds and the clock hands got a little bit confusing at times. Also I was unsure how to approach the circular movement idea...

if A and B have spent the equal time (which they do spend). Then essentially when they have traveled equidistant amount in the same time. At that timestamp there is the overtaking moment when cars are side-by-side. Also the speeds are given as constant speeds for both cars.

equatino could be something like
5x + 50 = 60x
where x itself ought to be the variable for the timestamp of the overtaking moment

where each side of the equation should produce equal distances for each car. Constant speed times the time, equals distance.
x= 0.9090 hours
the distance traveled ought to be exactly the same, otherwise there is not any point at which the overtaking occurs.
distance = 54.54km measured from the start location of the fast car (not the guy who had the head start)

EDIT: OOPS person B did not even have a car, but he was a walking pedestrian. :woot:
Do you see the relationship between this example and the clock example?
 
  • Like
Likes late347

Related to Analog clock algebra word problem

1. How do you solve an analog clock algebra word problem?

Solving an analog clock algebra word problem involves identifying the unknown variable, setting up an equation using the given information, and then solving for the variable. It may also involve converting between minutes and degrees on the clock face.

2. What are the common strategies for solving analog clock algebra word problems?

Some common strategies for solving analog clock algebra word problems include using the formula distance = rate x time, converting between minutes and degrees on the clock face, and setting up and solving equations based on the given information.

3. What are some examples of analog clock algebra word problems?

Examples of analog clock algebra word problems include finding the time when the hands of a clock form a specific angle, finding the angle between the hands of a clock at a given time, or determining how long it takes for the hands of a clock to cover a certain distance.

4. What skills are required to solve analog clock algebra word problems?

Solving analog clock algebra word problems requires an understanding of basic algebraic concepts such as variables, equations, and solving for unknowns. It also requires knowledge of analog clocks and how to convert between minutes and degrees on the clock face.

5. How can analog clock algebra word problems be applied in real-life situations?

Analog clock algebra word problems can be applied in real-life situations such as planning travel time or determining how long it takes to complete a task. They can also be used in fields such as physics and engineering to calculate distances and rates.

Similar threads

  • Precalculus Mathematics Homework Help
Replies
21
Views
2K
  • Precalculus Mathematics Homework Help
Replies
2
Views
1K
  • Special and General Relativity
Replies
34
Views
661
  • General Engineering
3
Replies
76
Views
8K
  • Set Theory, Logic, Probability, Statistics
Replies
1
Views
1K
  • Introductory Physics Homework Help
Replies
24
Views
2K
  • Precalculus Mathematics Homework Help
Replies
9
Views
1K
  • Precalculus Mathematics Homework Help
Replies
5
Views
2K
Replies
31
Views
4K
Replies
2
Views
1K
Back
Top