SCREENSHOT OF FIGURE ATTACHED! Pls help me I am very confused
A component for a lathe slideway was checked for straightness by means of an autocollimator and a reflector carriage whose base length is approximately 100 mm.The instruments were arranged as depicted in Figure 1. The reading at each...
SCREENSHOT OF FIGURE ATTACHED!
A component for a lathe slideway was checked for straightness by means of an autocollimator and a reflector carriage whose base length is approximately 100 mm.The instruments were arranged as depicted in Figure 1. The reading at each position, starting at end A...
i) Use EduPack Level 2 Sustainability to find the Polymer materials that satisfy ALL of the following criteria: - Maximum Density permissible is 1800 kg/m3 - Maximum Operating Temperature must be at least 100°C - Yield strength (Elastic Limit) > 50 MN/m2 - Can be injection moulded From this...
Problem 2 – Composites
A composite component (such as shown in Fig.2) is required for an aerospace application. The specification for the component stipulates that it must have an Elastic Modulus in the fibre direction of at least 320 GN/m2, and the transverse direction modulus must not be less...