I guess the discussion is going way off from the original question. I can manage the life and health calculation of the battery with algorithm with some estimations and efficiencies.
What actually I was asking for the validation of my equations in general.
Amusing that if I control the charge discharge rate, health, temperature and power demand in MATLAB according to battery specifications, the above calculation I have done in first pose are theoretically correct? Can I use them as a base for my rest of calculations and state of charge calculations?
It will be used in hybrid vehicle along with 100 kW fuel cell.
Battery will be used along side fuel cell to meet higher power demand.
In current duty cycle maximum power demand is 150 kW for approximately 10-15 minutes throughout 40 minutes journey.
Thank you for reply BvU,
I actually read the link you gave and the equations I used in my first post are also referenced from there.
Q1) If the calculations are not correct can you please help me fixing them. Once I have found the correct calculations I can limit the charge and discharge cap...
I am performing some calculations but struck with confusion whether I am doing it correct or wrong due to contradictions of these calculations on different calculators websites. I hope here someone will help me with the validation of my calculations.
Battery Capacity = 150 Ah
Battery...