I know the units of measurement for this are: MPa m^0.5
However a question I am working on has it as MPa m^-0.5
What is the difference and does it affect the way I calculate the answer?
Would appreciate your insight.
Thanks
Pete
Hi,
I have an electrical instrument which needs a 12V feed.
I have 2 power systems, and I want to select between them using an On-Off-On switch. I presume an SPDT is appropriate?
I need to run the feed to the instrument through a 3A circuit breaker.
Please could someone explain how I...
Sorry I am not sure which components you mean?
My understanding was:
A = fully rotational bi-directional fixed displacement hydraulic motor
B & C = Pressure Relief Valve
D = bi-directional fixed displacement hydraulic pump
E = Electric motor
F = Variable Restriction with Integral Non Return...
< Mentor Note -- thread moved to HH from the technical engineering forums, so no HH Template is shown >
Hi,
I am struggling with a couple of questions and would like to check my working so far.
Question 6:
To explain the operation: I believe the electric motor turns the pump which draws...
I have had another stab at it, and I would really appreciate it someone could sense check my answers? I haven't shown all the working on here, and the questions are in the attached files.
Q1 a)
Stress = Force / Area
i) 5000N / 706.68mm2 = -7.07MPa
ii) 5000N / 1600mm2 -3.125MPa
b)
i) Strain =...
So for the first question, I used Stress = Force / Area.
Working:
706.86mm2 / 5000N = 7.07Pa
1600mm2 / 5000N = 3.125Pa
I think I have figured out the 2nd question using Strain = Stress / Youngs Modulus
Working:
7.07Pa / 200GN = 3.535 x 10^-11
3.125Pa / 200GN = 1.5625 x 10*-11
Question c) I...
I am struggling with a question in my coursework, and would appreciate some guidance.
The question is:
The component shown in Fig 1 is made from a material with the following properties and is subjected to a compressive force of 5kN.
Material Properties :
Young’s Modulus of Elasticity – 200...