That is in no way like what I am making. One year would be ok but I think I will need more time. I also may not be selling them. Right now there are 10 to 15 companies that do anything that would like it. This will do it at 1% of the cost.
I made one like it 30 years ago and this is safe as can be. Testing will be done in a safe area. Working unit will be destructive testing done first. So unless dirt will burn after the power is off I will be safe. I also have water to the under ground room. I was a old bomb shelter.
This is home project that I have wanted to do for years. I know I will have to build a lot of them to get what I need. I am hoping to find some software that will help me. I have looked and I can not find any electromagnets that will work. I will have to have odd shaped cores and they will need...
These are made by many places in china. I would have to buy a few tons of them and drill out the core pipe. Someone in north america must make them.
ps I am looking for round slinky shaped not a folded foil like in a car
think of it like this
drill a 1" hole down the center of a 4" wide by...
I am looking for copper fins the same as would be on a heating pipe.
the fins need to be like a coil or slinky. If you have ever used or know
who makes them please let me know. I am working on an invention
and this is one of the parts i need. 2 to 3" OD and 3/4 to 1" ID
The max voltage would be no higher then 80 volts. The current could go as high as a 2000 amp pulse of about 100th of a second and about 20 a second. These are not fixed the lower the voltage and the higher the current the better.
This unit is going to be like a car hitting a brick wall 20...
Sorry for the delay
Yes but what I would like is a metal tube coated with rust on the outside and a good conductor on the inside. Copper is too soft and flattened out in a few minutes. The insulation breaks as well
y
I would like to find an insulator that can work in high heat and take a beating. A strong metal would be nice. It will be taking a beating and it will have to hold the copper in it form or the copper will flattened out