Recent content by FiveO

Hi There are mixed information on these on google. I want speed(low lag) first, valves will be open and closed 1-2 minutes. Controlling them with Arduino or ESP with relays. Do I get this right? AC 220 - controlling them with Solid State Relays + Speed of Solenoid with AC is faster than DC +...

Ok. I try to explain again. On the picture: Q1 #1 What happens with blue medium(it is vacuumed with 25Hgv before put on the pipe). Do it moves to 15Hgv, 25HgV or stay in place? Q1 #3 Same as like the firs question but with additional(2) 15Hgv port/tower. Q2 #1 One vacuum pump with 29.9Hgv, 1...

I hope this helps.

I think the fluid move for the higher vacuum side. But can this help to stay in place - 15HgV , space, high viscosity fluid, vacuum tower with 15HgV, high viscosity fluid, vacuum tower with 25HgV ? Vacuum regulators compensate the lower output vacuum with normal air pressure. So if the first...

Hi First question: In one end there is vacuum something like 15HgV, other end is something like 25HgV, in the middle there is high viscosity fluid that is pre vacuumed in 25HgV for any air bubbles. 15HgV , space, high viscosity fluid, space, 25HgV . Does the fluid move to the higher vacuum or...

Ok, I try to diagram my system on evening. No, the resin is in normal temperature, it is liquid what is later mixed with hardener.

Hello I need to build a pump to transfer alumina filled polyester resin. Can I use something like this - http://www.ebay.co.uk/itm/1Pcs-KSC50x100-50mm-Bore-100mm-Stroke-Double-Action-Pneumatic-Air-Cylinder-/350908339995?hash=item51b3c4571b ? One to use resin pumping, other for moving the resin...