Accuracy: accuracy is the maximum spread in measurements made of slide movements during successive runs at a number of target points
Resolution: Resolution refers to the smallest units of measurement that the system can recognize.
Please help me in selecting material Selection
the % is given
Al=82.918%,Mg=0.063%,si=12.603%,Fe=0.991,cu=2.612%,Mn=0.188%,cr=.038%,Ni=0.131%,Zn=0.118%,Sn=0.188%,Ti=.069%,Pb=0.181%
what will be the name of material.
no it is going throug valve (sloninoid valve) from storage cylinder through high pressure pipe into solinoid valve and then in the 1st stage chamber of pressure regulator.
pressure drops in pressure regulator from 300 bar to 4 bar in 1st stage chamber due to expansion how you can corelate pressure volume and temperature as temperature also drops in it
Pressure drops in CNG kit Pressure regulator from 300 bar to 4 bar in 1st chamber due to expansion is it throttling process? temperature also drops in it.
Thanks for guiding me FredGarvin
pressure reduces in the pressure regulator of CNG kit when Gas enters the Chamber of it due to Expansion how we can co relate pressure and volume? to reduce pressure from 300 bar to 4 bar and we know the initial volume how we can get the chamber volume.
basically CNG (compressed Natural Gas) it is now a days used in vehicles instead of Gasoline fuel. CNG kit is a complete system. compressed gas is at 300 bar in storag cylinder. it is brought upto the pressure of 2 bar after passing throug pressure regulator in CNG kit then this gas enters the...