Why does a series of pulses generate a pitch?

  • #1
Daniel Petka
124
12
TL;DR Summary
A single (very short) pulse has all the frequencies, so it should excite all the little hair sensors in the cochlea and I don't understand why sending this pulse repeatedly creates a pitch.
Here's the thing: the ear detects a pitch by splitting a sound wave into it's frequency components in the cochlea, which is in a way a spatial Fourier transform (ish...) But I never liked this analogy because it doesn't explain why I hear a pitch when a series of pulses entern my ear.

A single (very short) pulse has all the frequencies, so it should excite all the little hair sensors in the cochlea and I don't understand why sending this pulse repeatedly creates a pitch. A soundwave can be decomposed into sine waves, but if we go in that direction, it's kinda tricky to talk about the duration of the transform interval.. because I can still hear the individual pulses. T

here is this thing called wavelet transform, which decompises the signal into wave packets instead. But I found one example that I don't think can be explained by wavelets: chirped pulse trains. Imaging sending a pulse, then another pulse 0.1s later, another one 0.25s later etc. The immediate "frequency" (the time between the pulses) changes constantly and yet I can still hear a changing pitch. The effect can be replicated by playing two sawtooth waves, one at 10Hz and the other one at 10.1 Hz.
 
Last edited by a moderator:
Biology news on Phys.org
  • #2
I'm not sure I understand what your question is, but with respect to multiple pulses and the frequency components, do you think that lining up the pulses in the time domain to try to align the phases of the harmonic sinusoidal components might be important?
 
  • #3
The sensory cells within the inner ear structure respond to different frequencies.

Its my understanding that:
Some cells at low frequencies can respond with a spike (action potential) per wave.
Others can't respond as fast as the frequency they are set-up to sense. They use a frequency coding.
In both cases the sensory cells respond in a signal path that defines the frequency that would be perceived.

Here's a Wikipedia article: https://en.wikipedia.org/wiki/Neural_encoding_of_sound
 
  • Like
Likes Daniel Petka
  • #5
DaveE said:
The Fourier Transform of a pulse train is dominated at low frequencies by the fundamental frequency (pulse repetition frequency) and its harmonics. That is why you hear "tones".

https://sceweb.sce.uhcl.edu/harman/CENG3315_DSP_Spring2020/00_3315_2021/3315_web_2021/Fourier Series References_2_28_2021.pdf

BTW: It's not a spatial FT, it's temporal.
Well first of all, the ear doesn't perform a Fourier transform as you would need to listen from minus infinity to infinity. There is short time FT and wavelet but then.. what is the window length? And yes, it's essentially temporal, but your ear doesn't view it that way. The cochlea only knows which hair cells get excited. The ones closer to the edge of the ear correspond to high frequencies and the ones further down to lower ones. Hope that clears thing up a bit
 
  • Like
Likes BillTre
  • #6
BillTre said:
The sensory cells within the inner ear structure respond to different frequencies.

Its my understanding that:
Some cells at low frequencies can respond with a spike (action potential) per wave.
Others can't respond as fast as the frequency they are set-up to sense. They use a frequency coding.
In both cases the sensory cells respond in a signal path that defines the frequency that would be perceived.

Here's a Wikipedia article: https://en.wikipedia.org/wiki/Neural_encoding_of_sound
Thank you, I'll look into it.
 
  • #7
berkeman said:
I'm not sure I understand what your question is, but with respect to multiple pulses and the frequency components, do you think that lining up the pulses in the time domain to try to align the phases of the harmonic sinusoidal components might be important?
Phase doesn't matter in most cases, but sometimes it matters a lot. You'll see what I mean if you open any online tone generator and play a 10Hz sawtooth wave and another 10.1Hz sawtooth wave in another tab at the same time. If pitch was related to frequency, you would only hear the same pitch all the time. But as you hear, the pitch changes constantly. And the question is why. I don't think you can ignore the time domain in this case. The higher pitches correspond to pulses being closer together (which is kind of intuitive but I haven't heard anyone mention this before)
 
Last edited:

Related to Why does a series of pulses generate a pitch?

1. Why does a series of pulses generate a pitch?

A series of pulses generates a pitch because the frequency of the pulses determines the perceived pitch. When the pulses are close together, the brain interprets them as a higher pitch, and when they are further apart, the brain interprets them as a lower pitch. This is the basis of how we perceive sound.

2. How do pulses create a pitch?

Pulses create a pitch through the phenomenon of frequency perception. Our ears detect the frequency of the pulses and send signals to the brain, which then interprets this information as a specific pitch. The brain is able to distinguish between different frequencies and assign them different pitches.

3. What is the relationship between pulse rate and pitch?

The relationship between pulse rate and pitch is direct - the higher the pulse rate, the higher the perceived pitch, and the lower the pulse rate, the lower the perceived pitch. This relationship is consistent across all frequencies and is a fundamental aspect of how we perceive sound.

4. Why do we hear a pitch when we hear a series of pulses?

We hear a pitch when we hear a series of pulses because our auditory system is able to detect the frequency of the pulses and translate this information into a perceived pitch. This process is essential for our ability to distinguish between different sounds and frequencies in our environment.

5. How does the brain process a series of pulses to generate a pitch?

The brain processes a series of pulses to generate a pitch by analyzing the frequency of the pulses and comparing them to known pitch ranges. This information is then used to determine the perceived pitch of the sound. The brain's ability to process and interpret these signals is what allows us to perceive sound as music or speech.

Similar threads

Replies
20
Views
1K
  • Other Physics Topics
Replies
18
Views
2K
  • Introductory Physics Homework Help
Replies
6
Views
6K
Replies
29
Views
6K
Replies
9
Views
3K
  • Introductory Physics Homework Help
Replies
1
Views
2K
Replies
2
Views
4K
  • Electromagnetism
Replies
1
Views
1K
Back
Top