Test Nuclear Radiation detector

[mrmrzamany]

Hi, I want to test this radiation detector http://www.teviso.com/en/products/radiation-sensor-rd3024.htm

The problem is we don't have strong nuclear radiation sources or even weak ones , can i mimic the radiation ?? For example can i use Microwave sources or RF field or other radiation sources to test my sensor , if yes provide me with a method

Your Fast Replay is Appreciated

 

[gleem]

You need a source of ionizing radiation. Typically for regulatory monitoring a small check source is provided to assure proper operation when used. Such sources should not require a license for possession of the source (perhaps this depend on the country) . see for example

http://www.ludlums.com/products/check-sources.

This detector does not seem to have a direct readout, only providing a square wave pulse output for each detected radiation particle. So how do you propose to actually measure the count rate and calibrate the instrument?

 

[raining Pete]

Hello there!

It's great that you are interested in testing out the radiation detector from Teviso. As for your question, yes, it is possible to mimic radiation using other sources such as microwave or RF fields. However, it is important to note that these sources may not accurately simulate the type of radiation that the detector is designed to detect.

One method you could try is using a radioactive source, such as a small amount of uranium or thorium, and placing it close to the detector. This can provide a more accurate simulation of radiation and allow you to test the sensitivity and accuracy of the detector.

Another option is to use a radiation generator, which can produce different types of radiation for testing purposes. These can be expensive, but some companies offer rental services for a more cost-effective option.

It's always best to consult with the manufacturer or a radiation expert for specific guidelines and recommendations on testing your detector. I hope this helps and good luck with your testing!