Momentum Conservation and Center of Mass

In summary, the three-ball system has masses of 1 kg, 2 kg, and 3 kg arranged at x = 5 m, x = 10 m, and x = 15 m respectively, with a net force of 1 N applied to ball 1 in the +y direction, a net force of 2 N applied to ball 2 in the -y direction, and a net force of 0 N on ball 3. The magnitude of the acceleration of the center of mass is 0.333 m/s^2. For the block of mass 50 kg sliding along a frictionless surface with an initial momentum of 2450 kg*m/s, a constant force of 14 N is applied
  • #1
TwinGemini14
34
0
1. Ball 1, ball 2, and ball 3 have masses 1 kg, 2 kg, and 3 kg respectively, and are initially arranged at x = 5 m, x = 10 m, and x = 15 m respectively (see picture). y = 5 m for all three balls. Now suppose that a net force of 1 N is applied to ball 1 in the +y direction and a net force of 2 N is applied to ball 2 in the -y direction. The net force on ball 3 is zero.


What is the magnitude of the acceleration of the center of mass of the three-ball system?

A) 0.00 m/s2
B) 0.17 m/s2
C) 0.33 m/s2
D) 1.00 m/s2
E) 1.33 m/s2

----

So I first drew out the picture of the masses. Then since the acceleration of the center of mass is just the weighted average acceleration of all the masses, I did...
F1 = m1a1 or 1 = 1(a1) so a1=1.
F2 = m2a2 or 2 = 2(a2) so a2=1.
F3 = m3a3 or 0 = 3(a3) so a3=0.

(a1+a2+a3)/(m1+m2+m3) = 0.333m/s^2. So the answer is C. Is this correct?

============
A block of mass 50 kg is sliding along in the +x direction (to the right) with initial magnitude of momentum p0 = 2450 kg*m/s on a horizontal frictionless surface.


Then a constant force F = 14 N is applied as shown in the above drawing, where the angle of the force above horizontal is 20°.

2) One second after the force is applied, the momentum of the block in the ground frame will have:

A) decreased in magnitude
B) been conserved
C) increased in magnitude

----
The momentum has increased in magnitude since the object is accelerating due to a net force, correct? C?
----
3) After the force is applied, the total mechanical energy of the block will:

A) be less than it was before the force was applied
B) remain the same as it was before the force was applied
C) be greater than it was before the force was applied

----
B. Since the total mechanical energy is always conserved in this situation, right?
----

Can somebody please look over my work to see if I did these right? I really appreciate it. Thank you!
 
Physics news on Phys.org
  • #2
TwinGemini14 said:
(a1+a2+a3)/(m1+m2+m3) = 0.333m/s^2. So the answer is C. Is this correct?

No. Why do you think the sum of the accelerations divided by total mass is somehow still an acceleration? Units are wrong at a minimum.

Also too your forces are in different directions. Maybe if you considered the Net force divided by total mass you would have a better handle on how the CoM is being accelerated?
 
  • #3
For 2) assuming your force is directed horizontally in the direction of movement already, then yes momentum would increase with velocity.

For the next part, what is the definition of mechanical energy?
 

Related to Momentum Conservation and Center of Mass

1. What is momentum conservation?

Momentum conservation is a fundamental principle in physics which states that the total momentum of a closed system remains constant over time. This means that in a system where there are no external forces acting on the objects, the total momentum before an interaction must be equal to the total momentum after the interaction.

2. How is momentum conserved in collisions?

In collisions, momentum is conserved through the transfer of momentum between objects. For example, in an elastic collision between two objects, the total momentum before and after the collision must be equal. This means that if one object gains momentum, the other object must lose an equal amount of momentum.

3. What is the center of mass?

The center of mass of an object or system is the point at which the mass of the object or system is evenly distributed in all directions. It is the average location of all the mass in the system and can be thought of as the balance point of the system.

4. How is the center of mass related to momentum conservation?

The center of mass is closely related to momentum conservation because in a closed system, the total momentum of the system can be calculated by taking into account the mass and velocity of the objects as well as the distance of each object from the center of mass. This allows for an easier understanding and application of momentum conservation in complex systems.

5. Can momentum be created or destroyed?

No, according to the law of momentum conservation, momentum cannot be created or destroyed. It can only be transferred between objects in a system. This means that the total momentum of a closed system will remain constant over time, even if individual objects within the system may experience changes in momentum.

Similar threads

  • Introductory Physics Homework Help
Replies
23
Views
1K
  • Introductory Physics Homework Help
Replies
13
Views
1K
  • Introductory Physics Homework Help
Replies
10
Views
967
  • Introductory Physics Homework Help
Replies
5
Views
223
  • Introductory Physics Homework Help
Replies
10
Views
2K
  • Introductory Physics Homework Help
Replies
9
Views
1K
  • Introductory Physics Homework Help
10
Replies
335
Views
8K
  • Introductory Physics Homework Help
Replies
1
Views
770
  • Introductory Physics Homework Help
Replies
7
Views
551
  • Introductory Physics Homework Help
Replies
15
Views
346
Back
Top