Man-made generation of water waves

In summary, the instrument generating these waves has to have dimensions on the same order as the wavelength of the water wave.
  • #1
0pt618
25
1
The only man-made water waves I can think of are artificial waves in specialized swimming pools. If the wavelength of the water wave is W, does the instrument generating these waves have to have dimensions on the same order as W?

In other words, if you have a small object, can you generate waves with long wavelengths?

The motivation for this question comes from a song, which have lyrics along the lines of "like a small boat, generating big/long waves..."
 
Engineering news on Phys.org
  • #2
The wavelength is inversely proportional to the input frequency, not the size of the object generating the wave. The magnitude of the wave is a function of the energy of the object initiating the wave not the objects size. For example, a given size row boat with a 200 lb person jumping up and down at a rate of one jump per second with generate the same wavelength as that same boat with a 100 lb person jumping at the same rate; but, the heavier person will generate a larger wave (but only if in each case both people are jumping to the same height).
 
  • Like
Likes 0pt618
  • #3
Thanks JBA. Would you know any resources, such as book chapters or webpages, that sets out the physics of mechanical (man-made) water wave generation?
 
  • #4
JBA said:
The wavelength is inversely proportional to the input frequency, not the size of the object generating the wave. The magnitude of the wave is a function of the energy of the object initiating the wave not the objects size. For example, a given size row boat with a 200 lb person jumping up and down at a rate of one jump per second with generate the same wavelength as that same boat with a 100 lb person jumping at the same rate; but, the heavier person will generate a larger wave (but only if in each case both people are jumping to the same height).

This would be more accurate if the wave motion was decoupled from the fluid dynamics of the situation. Let's look at the boat example. This time, instead of changing the person's weight, keep the same size person and frequency but change the boat size. The larger boat is going to displace more water in the same amount of time. While the wavelength is inversely proportional to the frequency as you said above, there is a factor you left out in that a different size of object, for a given amplitude and frequency, will move more water around and likely have a different wave speed, and therefore a different wavelength.

So I therefore do believe that the wavelengths generated by an object will depend on the size of the object, and it is very likely that the wavelengths you can generate are limited to some range similar to the size of the object.
 
Last edited:
  • #5
The larger boat would have larger bouyant force and therefore for the same weight individuals and jump height, it is unlikely that any significantly larger would be created. That being said, yes, size does matter when it comes to wave amplitude, i.e. even with equal impact velocities, a large cannon ball will generate a larger wave than a smaller one. The size of the wave is dependent upon the total volume of water displaced and the rate at which it is displaced.

Opt618: I do not have any information about available sources of mechanical wave generation literature; nor did a through web turn up any serious literature on wave generating machine designs (even the normally trusty Wikipedia let me down on this subject). However, I did find the below site that at least shows how one wave tank location generates it waves; and, there is some indication that this a pretty standard method of doing so (but it is definitely not an inexpensive or simple one). I hope this helps a little bit.

http://science.howstuffworks.com/engineering/structural/wave-pool5.htm
 
Last edited:
  • Like
Likes 0pt618

Related to Man-made generation of water waves

1. How are water waves generated artificially?

Man-made generation of water waves involves using various methods such as paddle or piston systems, hydraulic pumps, pneumatic systems, and wavemakers to create disturbances in the water that result in waves.

2. What is the purpose of creating artificial water waves?

Artificial water waves can be used for various purposes, such as testing the strength and durability of structures against wave forces, studying the effects of waves on coastal erosion, and training for water sports and activities.

3. Can artificial water waves mimic natural waves accurately?

Yes, with advanced technology and precise control, man-made water waves can closely mimic natural waves in terms of height, frequency, and direction. However, they may not replicate the complex interactions and variations found in nature.

4. What factors affect the quality of man-made water waves?

The quality of man-made water waves can be affected by factors such as the type of wave generation system used, the size and shape of the wave tank, water depth, and the presence of obstacles or boundaries in the tank.

5. Are there any potential environmental impacts of man-made water waves?

Creating artificial water waves can have minimal environmental impacts, such as noise pollution and displacement of marine life. However, these impacts can be minimized by using eco-friendly materials and proper location planning.

Similar threads

Replies
5
Views
2K
Replies
3
Views
2K
Replies
3
Views
841
  • General Engineering
Replies
1
Views
1K
Replies
1
Views
1K
Replies
6
Views
2K
Replies
8
Views
1K
Replies
15
Views
3K
Back
Top