Fourier Series of Full Wave Rectifier

In summary, the conversation discusses determining the Fourier series for a full-wave rectifier function. The solution involves setting a variable, integrating over a certain interval, and simplifying the coefficients to obtain the series.
  • #1
thercias
62
0

Homework Statement


Determine the Fourier series for the full-wave rectifier defined as
f(t) = sinωt for 0 < ωt < pi
-sinωt for -pi < ωt < 0

Homework Equations


The Attempt at a Solution


This looks like an even function, so bm = 0
Ao = 1/pi∫sinωt from 0 to pi
= 1/pi(-cos(ωt))/ω) from 0 to pi
= 2/piω

An = 2/pi∫sin(ωt)cos(nt) from 0 to pi (because the function is even)
=2/pi∫(0.5(sin(ωt-nt)+0.5(sin(ωt+nt)) from 0 to pi
=-1/pi(cos(ωt-nt)/(ω-n) + cos(nt+ωt)/(n+ω)) from 0 to pi
= -(cos(pi(ω-n))-1)/(n+ω) -(cos(pi(ω+n))-1)/(pi(n+ω))

I'm stuck at this part. I don't know how to simplify those or what that equals to and I've been looking around for a very long time trying to figure it out...any help?
 
Last edited:
Physics news on Phys.org
  • #2
First of all you should set [itex]\tau=\omega t[/itex]. Then your calculations become right. Further you must specify with respect to which integral you integrate. Of course you are right, that it's an even function and thus it's a pure cosine series.

Then you have
[tex]a_n=\frac{1}{\pi} \int_{-\pi}^{\pi} \mathrm{d} \tau f(\tau) \cos(n \tau)=\frac{2}{\pi} \int_0^{\pi} \mathrm{d} \tau \sin \tau \cos(n \tau)[/tex]
and
[tex]f(\tau)=\frac{a_0}{2} + \sum_{n=1}^{\infty} a_n \cos(n \tau).[/tex]
 
  • #3
ok, using that way I got

Ao = 2/pi

and An = -(cos(pi(1-n))-1)/pi(1-n) -(cos(pi(1+n))-1)/(pi(1+n))
my problem with this part is knowing what the cosine part equals out to. it seems to oscillate back and fourth from -1 to +1 as n increases
so it becomes
-(((-1)^n+1)-1)/pi(1-n)-(((-1)^n+1)-1)/pi(1+n)
this doesn't feel right though, am i doing something wrong?
 
  • #4
Your coefficients are correct. Simplified and written in LaTeX makes it a bit better readable:
[tex]a_n=\frac{2}{\pi(1-n^2)}[1+\cos(n \pi)].[/tex]
There's only an apparent problem at [itex]n=1[/itex], but a direct calculation of the integral gives [itex]a_1=0[/itex]. Thus you have for [itex]k \in \mathbb{N}_0[/itex]
[tex]a_{2k}=\frac{4}{\pi(1-4 k^2)}, \quad a_{2k+1}=0.[/tex]
The Fourier series thus is
[tex]f(\tau)=\frac{2}{\pi} + \sum_{k=1}^{\infty} \frac{4}{1-4k^2} \cos(2 k \tau)[/tex]
or substituting back [itex]\tau=\omega t[/itex]:
[tex]f(t)=\frac{2}{\pi} + \sum_{k=1}^{\infty} \frac{4}{1-4k^2} \cos(2 k \omega t).[/tex]
 

Related to Fourier Series of Full Wave Rectifier

What is a Fourier Series?

A Fourier series is a mathematical representation of a periodic function as a sum of sine and cosine functions. It is used to decompose a complex periodic signal into simpler components, making it easier to analyze and understand. It is often used in signal processing, physics, and engineering.

How is a Fourier Series used in a Full Wave Rectifier?

In a full wave rectifier, the input signal is a periodic alternating current (AC) signal. The output of the rectifier is a direct current (DC) signal, which is the absolute value of the input signal. By using a Fourier series, we can decompose the AC input signal into its component sine and cosine functions, and then apply the rectification process to each component separately. This allows us to understand the behavior of the rectifier more easily.

What is a Full Wave Rectifier?

A full wave rectifier is an electronic circuit that converts an AC input signal into a DC output signal. It does this by using diodes to only allow current to flow in one direction. It is called a full wave rectifier because it rectifies both the positive and negative halves of the AC input signal, resulting in a smoother output than a half wave rectifier.

Why is a Fourier Series of Full Wave Rectifier important?

The Fourier series of a full wave rectifier allows us to understand the behavior of the rectifier and how it affects the input signal. It also helps us analyze the output signal and determine any distortion or noise that may be present. This information is crucial for designing and optimizing electronic circuits that use full wave rectifiers.

Can a Fourier Series of Full Wave Rectifier be used to improve the performance of electronic circuits?

Yes, by using the Fourier series analysis of a full wave rectifier, we can identify any harmonics or other unwanted signals present in the output. This information can then be used to design filters or other components that can remove or reduce these unwanted signals, thereby improving the overall performance of the electronic circuit.

Similar threads

  • Calculus and Beyond Homework Help
Replies
1
Views
307
  • Calculus and Beyond Homework Help
Replies
3
Views
508
  • Calculus and Beyond Homework Help
Replies
1
Views
411
  • Calculus and Beyond Homework Help
Replies
3
Views
398
  • Calculus and Beyond Homework Help
Replies
16
Views
647
  • Calculus and Beyond Homework Help
Replies
1
Views
597
  • Calculus and Beyond Homework Help
Replies
2
Views
2K
  • Calculus and Beyond Homework Help
Replies
2
Views
1K
  • Calculus and Beyond Homework Help
Replies
1
Views
320
  • Calculus and Beyond Homework Help
Replies
2
Views
432
Back
Top